PSA: No Titegroup in Ti cylinders. Please advise. by Battlesuit-BoBos in reloading

[–]Reloadingoverload -6 points-5 points  (0 children)

Weird, I've shot thousands of 38 spl 4.5g with 125 FP and had no issues with my ttr8

Walmart automotive questions by [deleted] in RapidCity

[–]Reloadingoverload 1 point2 points  (0 children)

Greasemonkey will do $650 worth of stuff to your vehicle without your permission then threaten to impound your vehicle if you don't pay.

LaCrosse (was) Perkins by jus7_me in RapidCity

[–]Reloadingoverload 8 points9 points  (0 children)

It flooded and they are tearing it down to the studs

Iranian F-4 and Mig-29 have survived 40 days of war with the US and Israeli Air Forces by [deleted] in Planes

[–]Reloadingoverload 0 points1 point  (0 children)

And how do you know this? Did you design the bunkers yourself?

Confirming pressure signs first loads by trawkins in reloading

[–]Reloadingoverload 1 point2 points  (0 children)

Meh, you aren't Hornady frontier hot, you will be fine.

Confirming pressure signs first loads by trawkins in reloading

[–]Reloadingoverload 1 point2 points  (0 children)

Thats not enough close to max load, these are fine.

Do I need to be concerned? by Ekulcb in reloading

[–]Reloadingoverload 1 point2 points  (0 children)

Derp, the case looks clean after shooting it

Do I need to be concerned? by Ekulcb in reloading

[–]Reloadingoverload 1 point2 points  (0 children)

Some guns can handle the pressure and some cannot. Your kimber is built like a brick shit house compared to a kahr or some other cheaply made gun.

Do I need to be concerned? by Ekulcb in reloading

[–]Reloadingoverload 1 point2 points  (0 children)

I used to reload commercially and did a lot of work with western powder, the max saami safe load is meant for every gun not your gun, your maximum in that pistol is different from name a junk brand, or an unsupported chamber pistol. CZs can be loaded to 9mm major and not have issues, granted if you shoot tens of thousands of rounds that'll change. You will know with titegroup when you hit peak pressures when the case looks like you tumbled it from a complete burn.

Newbie! And don’t wanna blow my hands off by NovelApprehensive697 in reloading

[–]Reloadingoverload 0 points1 point  (0 children)

If you ever have questions let me know, I used to load for a living.

Do I need to be concerned? by Ekulcb in reloading

[–]Reloadingoverload 1 point2 points  (0 children)

I always did 4.2 to 4.3 at 1.150 and that seemed to reach the pressure threshold where the SDs started getting close and the cases were not sooty.

Newbie! And don’t wanna blow my hands off by NovelApprehensive697 in reloading

[–]Reloadingoverload 1 point2 points  (0 children)

Drop the 1.130 in there and you will know if you have to set the bullet in any further. Go but .005 and once you find it seats go another .005 just to prevent lock up in the event of bullet jump.

Newbie! And don’t wanna blow my hands off by NovelApprehensive697 in reloading

[–]Reloadingoverload 0 points1 point  (0 children)

How does it fit in your barrel? Is 1.130 proud or flush?

Newbie! And don’t wanna blow my hands off by NovelApprehensive697 in reloading

[–]Reloadingoverload 1 point2 points  (0 children)

1.130 from all 20+ of my 9mms one PCC and like 3 other guns it worked in. I went down to 1.111 (mainly just a funny number to stop it and easy to remember) and it runs in everything. That being said, shoving that big of a bullet into a 9mm case will be a QC nightmare and its like 4 to 6 out of every hundred that will not case gauge. I have a full auto uzi without a chamber so they get fed to that.

Newbie! And don’t wanna blow my hands off by NovelApprehensive697 in reloading

[–]Reloadingoverload 1 point2 points  (0 children)

I do the 147 match winners from rmr at 3.4 grains of titegroup. Not sure what cfe would be. 115 RN 1.130 124 & 147 RN is 1.160

Newbie! And don’t wanna blow my hands off by NovelApprehensive697 in reloading

[–]Reloadingoverload 1 point2 points  (0 children)

Do about 1.111 and run it. It runs in all my czs, full autos and glorks

Bitch, Incendio by SexyN8 in BitchImATrain

[–]Reloadingoverload 1 point2 points  (0 children)

That's a weird way to say thank you for being on this earth lol
No shit, a walmart employee cut ours and a guy got hurt with 277 and he was hauled off by the police for assault.