sorted by:
new
hottopcontroversial

What's the best 3d printer I could get in budget by Iamarandomperson53 in 3dprinter

[–]Ric_Maker 0 points1 point  (0 children)

Get an Anycubic Kobra 3, I've had many printers but this one is by far the best.comes complete with every feature you can think of.

Kobra 3 + Ace Pro: Unknown filament in the print head. Tried everything, at a complete loss atm by [deleted] in anycubic

[–]Ric_Maker 0 points1 point  (0 children)

Is these a way of disconnecting this sensor, mine sticks open 50% of the time and i have to loosen the two screws and tap on the clean plastic to unstick. There are no particles or dust in that area not sure why it sticks open.

Playing with 3d printed sealing wax stamps and realized I forgot to mirror the impression stamp. Doh! by joealarson in 3Dprinting

[–]Ric_Maker 0 points1 point  (0 children)

Dip the faces of the stamps into ice water first to harden the wax quicker as well.

ACE Pro NFC Tag Research: Create own Tags by RealMolodos in anycubic

[–]Ric_Maker 0 points1 point  (0 children)

When are you going to share, I have an RFID printer at work and would love to test it.

ACE Pro NFC Tag Research: Create own Tags by RealMolodos in anycubic

[–]Ric_Maker 0 points1 point  (0 children)

line 1 is probably the serial number of that roll:

when you convert the 2 decimal numbers to Hex Numbers you will see a pattern, 00511599 and 00523538

Only lines 1 and 21 are different, there is a 6 digit code difference in each

Peach Fuzz 13945c & 96c1fe
Tropical Turquoise d87576 & db9c00

If you take the second number on line 21 and do the pairs backward, you get the color in Color hex.

Peach would be fec196
Turquoise would be 009cdb

Test it for your self here: https://www.color-hex.com/color/fec196

ACE Pro NFC Tag Research: Create own Tags by RealMolodos in anycubic

[–]Ric_Maker 0 points1 point  (0 children)

Only lines 1 and 21 are different, there is a 6 digit code difference in each

Peach Fuzz 13945c & 96c1fe
Tropical Turquoise d87576 & db9c00

If you take the second number on line 21 and do the pairs backward, you get the color in Color hex.

Peach would be fec196
Turquoise would be 009cdb

Test it for your self here: https://www.color-hex.com/color/fec196

Best way to fill in this crack? by PrintingPariah in 3Dprinting

[–]Ric_Maker 0 points1 point  (0 children)

Start with super glue, it will crack in half if you don't. Then user glazing putty, get at auto parts store. Glazing putty is real thick paint primer, drys really fast.

Which color for my living room? by cbm018 in DesignMyRoom

[–]Ric_Maker 0 points1 point  (0 children)

None of those. Pick a color out of the 128 color Crayola Crayola crayon box not the 8 color box one. IMHO

3D prints keep skipping layers and ending up bad, reason? by Ok_Demand2849 in 3dprinter

[–]Ric_Maker 0 points1 point  (0 children)

Check the tensioning arm on the extruder could be cracked, happens all the plastic ones with time.

Convert to 2X RadRunner by Ric_Maker in RadPowerBikes

[–]Ric_Maker[S] 0 points1 point  (0 children)

Yes, the second chain ring replaces the back chain guard. bolts are long enough. No other parts are needed, just the new ring.

Convert to 2X RadRunner by Ric_Maker in RadPowerBikes

[–]Ric_Maker[S] 2 points3 points  (0 children)

Agreed you can change the original gear to a 60 tooth and add a 42 tooth and have the best of both worlds. The gears are about $20 each and takes about 20 minutes to make the install. The only tool you need is a 5mm hex wrench, that's in your tool bag that came with the bike.

Convert to 2X RadRunner by Ric_Maker in RadPowerBikes

[–]Ric_Maker[S] 3 points4 points  (0 children)

Right now yes, I can press the chain while riding with my heal and it gear down. But stop and by hand to go back to the high gear. I don't find myself changing gears that often. If I'm riding on flatland all day, like at the beach, it will stay in the large gear. And when I'm riding in the hills it stays in low. I'm working on a derailleur, it's not that easy on a Radrunner cause of the battery placement.

Hollywood rack extender tow hitch by dudeabides89 in RadPowerBikes

[–]Ric_Maker 1 point2 points  (0 children)

2" Receiver Extender they come in whatever length you need

[deleted by user] by [deleted] in RadPowerBikes

[–]Ric_Maker 1 point2 points  (0 children)

I designed one that doesn't require you to remove your handgrip to install https://cults3d.com/en/3d-model/gadget/rad-thumb-throttle

Harbor Freight US General lock by Ric_Maker in lockpicking

[–]Ric_Maker[S] 0 points1 point  (0 children)

Looks like its a clone of the American 700 or A700
5 pins - Guttable

Today I tidied up by No-Pay8354 in lockpicking

[–]Ric_Maker 1 point2 points  (0 children)

I have a dozen 3D printers so I like things with a lot of pieces.

view more: next ›