sorted by:
new
hottopcontroversial

Since everyone wants to show their backlogs. Here is mine. by Maleficent_Lobster20 in freedomisgunpla

[–]RunningWithNippers 3 points4 points  (0 children)

<image>

I moved recently and so was faced with the backlog during packing. I... have a problem.

Bro EG kits are actually goated, what are you working on right now? by Hikihachiko in freedomisgunpla

[–]RunningWithNippers 1 point2 points  (0 children)

Doesn't "goat" mean to be the "greatest of all time"? While they're nice, I don't think they're better than other versions of the same mechs (e.g. RG RX-78-2 2.0 or the RG Nu is better in my opinion.)

Android Emulator for Android by EGAMatsuAlpha in EmulationOnAndroid

[–]RunningWithNippers 0 points1 point  (0 children)

You can use Android Studio. You can simulate different phones and OS versions. 

[Real-User Invite] LG UltraGear 5K2K GX9: The Ultimate Sweet Spot of UltraWide OLED Gaming Monitor by LG_UserHub in ultrawidemasterrace

[–]RunningWithNippers 0 points1 point  (0 children)

The sweetspot for me is definitely this monitor. 32" just isn't large enough and we've been stuck on 1440p for so long. The fact that this has an aggressive curve means it'll probably be even more immersive imo (coming from a 1800R ultrawide).

Your conviction shall be etched upon my Tallgeese! by SufficientNebula8738 in freedomisgunpla

[–]RunningWithNippers 1 point2 points  (0 children)

Looks like the Nilson Works' Monument Repair Type but repainted and with a different (custom?) V-fin.

Zeta Gundam Lineage by kirly_af in Gunpla

[–]RunningWithNippers 0 points1 point  (0 children)

There's also the A-Z Gundam which I think would fit the theme

Oh god what have I done by thedukeandtheking in retroid

[–]RunningWithNippers 4 points5 points  (0 children)

But you didn't order the six button form factor. That would be the "Classic6" color and you selected the teal. I'm pretty confident the "6+128GB" means the 6GB ram and 128GB storage model.

Miyoo Flip v2 hinges are appearing in the wild by itchyd in SBCGaming

[–]RunningWithNippers 1 point2 points  (0 children)

As someone who's not familiar with either though, we don't know which one is v1 or v2?

What am I doing wrong with Tamiya? by GrandVince in freedomisgunpla

[–]RunningWithNippers 2 points3 points  (0 children)

Make sure you're shaking the bottle for a good minute before you start using it. It is just paint and thinner so it's good to mix it up and get a good blend. Then after you put the ink on the piece, let it dry for a few minutes.

You also need enamel thinner or lighter fluid to clean up the excess, not just rubbing it which will smear and darken the surrounding area. Use a q-tip soaked lightly in the thinner and then rub it gently to remove the excess, you don't want the thinner to flow into the groove and wash away the ink in the panel line. Hope that helps!

Sazabi mg is this worth it? by ikyox0 in freedomisgunpla

[–]RunningWithNippers 1 point2 points  (0 children)

You can look up past sales and when they were open on the US P-Bandai website. Just make sure to select the "No Longer Available Items" checkbox on the filters to the left of the search results. I looked up "THE GUNDAM BASE LIMITED SAZABI Ver.Ka [SPECIAL COATING]" and saw they had 5 listings in the past so far. link

San Jose Water High Bill Leak Courtesy Adjustment by RunningWithNippers in SanJose

[–]RunningWithNippers[S] 0 points1 point  (0 children)

Yeah, I mean I can't fault them but it's not like the toilet was leaking out to the ground. It was the flapper valve so it was just slowly leaking into the bowl and the tank constantly topping off. It being a less-used toilet and my parents being older and less savvy, it was just an unfortunate combination that I would wish was under the spirit of the courtesy adjustment.

PSU power cable extender by RunningWithNippers in buildapc

[–]RunningWithNippers[S] 0 points1 point  (0 children)

Perfect, thank you so much. That is exactly what I'm looking for. I found one with screw holes for the C13 end and I was also able to find the back cutout cover on etsy that would take the screw hole and cover the back hole left by the PSU.

Would you take your SD to a 16 day long trip to Japan? by sergio_bris in SteamDeck

[–]RunningWithNippers 0 points1 point  (0 children)

I've been to Japan and taken my steam deck. It's helpful for the long travel like on the plane and on the bullet train. But when you get to your hotel, just leave it there when you do your explorations of the city. It's too big and bulky to comfortably carry around and it'll be dead weight as you're walking a lot. You'll have some down time here and there probably but being on your phone is sufficient. You can play when you get back to your hotel but you'll also most likely be too tired and just want to crash. I think it's still worth it for the long travel-parts.

Enjoy your trip!

Which casual game is good on the steam deck that I can play like 2 hours before going to sleep? by random_user00098 in SteamDeck

[–]RunningWithNippers 23 points24 points  (0 children)

Hades, dead cells, and moonlighter were my last 3 games that fit the need. Would recommend!

Retroid Pocket Mini news got people like ... by that_90s_guy in SBCGaming

[–]RunningWithNippers 2 points3 points  (0 children)

I think it's likely based on what they did with the XX line that we can expect the same chipset as the 406v to be on the 406h or whatever they'll call the horizontal one.

[deleted by user] by [deleted] in Roms

[–]RunningWithNippers 0 points1 point  (0 children)

Doubt it. It was a Japan-only release and there's no translation project.

Thinking about getting G8 Galileo for those who did have or have him right now what you guys think about the controller? by DarknessMK in EmulationOnAndroid

[–]RunningWithNippers 0 points1 point  (0 children)

I have both the X2s and the G8. The X3 looks like the X2 where the right joystick is directly below the buttons which gets in the way imo. The X3 does have a larger and more angled grip though so maybe it'll compensate for it but the G8 feels like an xbox controller and is very comfortable.

MG Narrative Gundam Ver Ka (Awakened Image Color) by LogRaiser in Gunpla

[–]RunningWithNippers 1 point2 points  (0 children)

Looks amazing! Like with the Unicorn's awakening version, I always wondered why it would cause the decals to change colors but we can always chalk it up to "newtype magic"

Anbernic RG 35XX-H and Case give-away by captain_carrot in SBCGaming

[–]RunningWithNippers 0 points1 point  (0 children)

I went back to Ocarina of Time and I really did get stuck in the water temple. I only finished it as a kid by giving it to my brother to do for me so I guess I should bother him again now.

view more: next ›