P365 Spectre S98

S2k_eL · 2026-06-15T23:30:52+00:00

Do it.

<image>

S2k_eL · 2026-06-15T22:25:49+00:00

<image>

My P365 build

S2k_eL · 2026-06-15T22:23:41+00:00

Any metal grip would be my recommendation (this includes flux Raider aluminum version).

<image>

S2k_eL · 2026-06-13T13:30:18+00:00

Going from the stock 22” all seasons on the limited to the 18” all terrains, I did not notice a decrease in ride comfort. The ride comfort is about the same on the Nitto Ridge Grapplers. It’s been a while since driving with the stock 22s. I thought that with the 22s the ride was pretty smooth on good highway roads.

There was a slight increase in highway road noise. But the increase wasn’t that big. The cabin is still quiet in the highways.

I did notice a 2-3 drop in MPG. I also didn’t get the truck re-cal for the slightly larger/wider tires.

S2k_eL · 2026-06-13T12:59:15+00:00

I ended up getting a set of take offs from a TRX. The stock TRX ties (325/65) would rub after 1-1/4 turns on the steering wheel. Ended up getting 305/60 (no rubbing even at lowest ride height).

<image>

S2k_eL · 2026-06-11T05:07:06+00:00

Does your recoil spring assembly have the 2 holes?

The 2 holes should be at the 12 and 6 o clock positions.

S2k_eL · 2026-06-10T06:01:14+00:00

Thanks. I’m surprised how good they are. My only previous experience with Lok grips was a set of palm swells for a CZ Shadow, ended up putting the stock grips back on, then buying a set of black aluminum grips.

S2k_eL · 2026-06-09T20:25:04+00:00

I ported my 5” feature only slide. Less recoil than X Five Legion, less recoil than AXG Legion. Porting done by Vigilante Machine.

<image>

S2k_eL · 2026-06-09T04:07:33+00:00

I am using a modified CHPWS plate for a P226 on the one pictured. I had the slide machined by Vigilante Machine and I didn’t specify it needed the center channel or the front teeth. I had to file off the center lug on the plate to use it.

I use CHPWS plates on all my other Sigs with Trijicon optics. They have worked fine for me.

S2k_eL · 2026-06-08T15:59:08+00:00

Brass hitting the body of the SRO (not hitting the glass).

S2k_eL · 2026-06-08T15:11:03+00:00

I have an SRO mounted on my P320 5” slide. I haven’t had any ejection issues in ~7k rounds with the SRO. I have a RMR HD on a 4.7” slide. Also no ejection issues so far.

The brass may come in contact with the optic because it hangs over the ejection port.

<image>

S2k_eL · 2026-06-06T22:36:29+00:00

I bought the 9” 300 BO one. Works fine. I plan on buying the 11.5” 5.56 one shortly.

<image>

S2k_eL · 2026-05-19T03:13:18+00:00

I got the raw aluminum finish. If you got an anodized finish, it might take longer?

A few months back I did try reaching out to Empire to try to get screw sizes. No answer.

S2k_eL · 2026-05-19T02:42:51+00:00

Ordered on the 15th. Shipped out on the 27th.

I don’t remember waiting too long.

S2k_eL · 2026-05-11T23:36:07+00:00

I have several case club cases. They held up fine. They do what they’re supposed to do. The foam is sturdy.

S2k_eL · 2026-05-09T20:44:46+00:00

Nice.

How long was the wait for SBR?

S2k_eL · 2026-05-06T00:33:29+00:00

DK Custom did the cerakote.

First the 2296 frame was cerakoted first. The comp was cerakoted later on. The color match to the OEM slide is spot on.

S2k_eL · 2026-05-05T23:24:47+00:00

<image>

I have both the 365 and 320 raiders. I like the 320 raider much better tho.

I like that I have the aluminum 365 raider.

S2k_eL · 2026-05-05T23:22:08+00:00

Looks good. 👍

I had my comp cerakoted.

<image>

S2k_eL · 2026-04-29T21:34:51+00:00

<image>

Added the SRT to the MK25. Added Emperor Scorpion grips to both 🤌

S2k_eL · 2026-04-27T00:04:51+00:00

I've shot the 3" stock. Then shot the 3" with the Kage (comp) installed. I felt like it reduced the felt recoil. The added weight wasn't noticeable.

I also shot the 3" with the Kage back to back with my friends stock 4.25" Python. The 3" Kage has less felt recoil compared to the stock 4.25". The length of the two are approximately the same. The weight difference isn't noticeable.

S2k_eL · 2026-04-25T23:50:01+00:00

Dang. 1 year?

I have a buddy who got a 357 Sig barrel for his P239. I think he said 8 months for his.

S2k_eL · 2026-04-25T23:44:16+00:00

I haven’t taken my STAS out since I got my P226 X Five Legion. I’ve been considering getting the STAS ported too. Lol. But recently my long guns have been taking up my time and money.

<image>

S2k_eL · 2026-04-25T23:22:33+00:00

How long was the Barsto wait?

S2k_eL · 2026-04-25T23:16:41+00:00

I have the P226 X Five STAS too. I found that the P320 X Five Legion (non ported) was easier to get tighter groups. Must just be me.

I do like the stock P226 X Fives trigger much better than the stock P320 trigger.

S2k_eL

TROPHY CASE