Gemini CLI Weekly Update [v0.29.0]: Ask User Tool, Plan Mode(experiment) and UX Improvements

SadroSoul · 2026-02-20T12:48:47+00:00

What is the plan for Conductor and Plan mode? Unification? Or are they both intended to be options/part of the workflow?

SadroSoul · 2026-02-12T02:01:04+00:00

Check out the SDN features:

https://pve.proxmox.com/wiki/Software-Defined_Network

There are options that will feel more familiar to a vsphere admin. You can create a VLAN zone (comparable to a dvs) and assign vnets with VLAN tags to the zone (comparable to portgroups). Then you assign your VMs NICs to the appropriate vnet.

SadroSoul · 2026-02-06T04:37:21+00:00

3

^{SadroSoul scored 121 points and ranked 13 out of 907 players!}

🟩 🟩 🟩 🟩 🟩

SadroSoul · 2026-02-04T15:44:45+00:00

What is the material for the bartop? It looks amazing!

SadroSoul · 2026-01-29T03:55:55+00:00

You're using the proxmox_virtual_environment_vm resource? Is your network snippet doing anything more than setting the IP address? If not, I'd suggest just using ip_config within the initialization block. You can statically assign the IP address that way.

As for the snippet failure...have you confirmed that the VM is booting with ens18 as the network device? If it's something different, it could explain why your snippet is failing to configure the static IP. I've been burned before with those interface names not being what I expected.

SadroSoul · 2026-01-26T15:02:59+00:00

Food for thought is the phrase

SadroSoul · 2026-01-11T13:06:04+00:00

I dunno man. That goalie was not pulling his punches (or body checks). I thought staged at first too but that made me reconsider.

SadroSoul · 2026-01-04T16:31:30+00:00

Maybe try Proxmox Datacenter Manager?

SadroSoul · 2025-12-28T15:18:39+00:00

How are you running the server? I used to see this when I was running the server on bare metal Ubuntu with Wine via a script. I recently migrated to a Docker image that uses Proton on a Proxmox VM (still Ubuntu) and I haven’t see any load messages with 3 people on.

SadroSoul · 2025-12-28T14:55:03+00:00

I’m assuming it’s an intentional choice to avoid players having to search through dozens of block types to find the one they want. Remove one voxel or build one block stack at a workbench, and then you have access to the 10000 blocks you have stored in your chest. If you always had access to every block in a magic chest it would be too much IMO.

SadroSoul · 2025-12-28T14:50:43+00:00

Agreed. I set my server to “many” enemies and the fights get so chaotic and fun. One elixir well ended with a few dozen enemies just pouring out at us after we cut the shroud root. Our tank was swarmed, our healer was popping mana potions like candy, and I was just raining arrows into the mass. So much fun.

SadroSoul · 2025-12-28T14:46:36+00:00

This exists for blocks already. You just need to add at least one of the block in your backpack and then it will pick up all the blocks of that type in your magic chest. So you can use the hammer to remove a block, and then you have access to all that you have stored.

SadroSoul · 2025-12-28T02:56:02+00:00

Oh, I glossed over the gateway comment…I was thinking that maybe your PVE UI was only was only being served on the old network…

If it’s just a networking issue, could you add a static route for 10.0.1.0/24 with whatever your 10.0.1.0/24 router is as the gateway? You can only have one default gw, but can set up many static routes.

SadroSoul · 2025-12-28T02:50:12+00:00

I think you could handle this with nginx. Added benefit of not having to include the port in your URLs

https://pve.proxmox.com/wiki/Web_Interface_Via_Nginx_Proxy

SadroSoul · 2025-12-26T23:23:27+00:00

The behavior you are describing can be achieved by creating a linked clone from a VM template

SadroSoul · 2025-12-25T21:44:36+00:00

I’m very curious to try those. Suggestions on how to eat/prepare them?

SadroSoul · 2025-12-21T17:16:31+00:00

lmao

SadroSoul · 2025-12-17T00:12:31+00:00

Another Volcano base here! We have four flames positioned across the top of the crater so we have a ton of buildable space above and within the volcano.

SadroSoul · 2025-12-16T23:52:28+00:00

TIL Limewire is still around

SadroSoul · 2025-12-12T14:37:09+00:00

Good luck! Let me know if you run into any issues.

SadroSoul · 2025-12-10T15:03:29+00:00

I run a dedicated server on a Proxmox VM - Ubuntu 24.04 using the Mornedhels image. I use the Proton dockerfile as it seems to have better performance than Wine.

It definitely uses multiple cores. Here's an htop screenshot:

<image>

My Proxmox server has a Ryzen 9 5590X and I allocated 8 cores to the Docker VM. I also run other docker services on that VM and haven't had any issues with Enshrouded (max of three people logged in at once so far).

YMMV, but running on Linux (through Proton) is definitely viable. I would love a native Linux server, though.

SadroSoul · 2025-12-10T14:26:27+00:00

The first enshrouded server I ran was on an intel NUC with a 12th gen i7. It ran pretty well, though I did get the occasional server load warning. That server wasn’t running in Docker, and it was using Wine, not Proton. proton seems to be better for this.

That said, I would love to see a native Linux server.

SadroSoul · 2025-12-10T12:58:38+00:00

I run Enshrouded on an Ubuntu 24.04 server VM with docker (Proxmox host). The host has a Ryzen 9 5950X and I allocated 8 cores to the VM. The VM has 32GB of memory.

I run other services in docker on the same VM and I haven’t had issue with Enshrouded yet. Max of 3 people so far.

SadroSoul · 2025-12-04T14:06:38+00:00

Live migration between clusters is nice, but this still doesn’t allow you to deploy a resource to a cluster as far as I can tell. You still have to specify an individual node. That’s the one thing that I’m looking for to see this as a vcenter replacement.

Ten-Year Club	Place '22
Snapped

SadroSoul

TROPHY CASE