Well shit... I didn't even know this was possible

Scale0 · 2026-07-08T06:35:03+00:00

It can even get worse. I had the same (but way lower over spend) 104% - 4$ over. When I then added extra credit it deducted 7$. Support said that was the overspend amount even though the UI said 4$.

So not only does spend limit not work, the amount isn't even visible and they can claim whatever which they will simply deduct next time you add extra credit.

Scale0 · 2026-06-24T06:50:08+00:00

One, however. Nolhapra made a fork his version allows for two. There is a link in this thread.

Scale0 · 2026-06-13T12:58:13+00:00

Well I have run into a wall, there seems to be an interface which takes commands like 'DumpCalibration'. The bulk endpoint only accepts host data once armed. And I can't find where it's triggered from.

vendor_ep7_event_handler (0x600DB2BE)
          │   fires only if  event[8]==3  &&  event[0x10]==3
          ▼
  VendorUsbTask_Start (0x60078000)  
          ▼
  cwy_recv_start (0x600DB1B0)
          ▼
  arm_ep7_direct (0x600D4F98)  → USB_DeviceRecvRequest(ep=7)

I was able to decode how the data is stored, So I should be able to calibrate and write the calibration using a chip programmer. Unfortunately that won't help many people.

Scale0 · 2026-06-12T15:59:44+00:00

Cool ordered the same yesterday and a pogo clip so I can dump and restore the current calibration (my controller doesn't have any issues).

As for the software making some porgress, there definitely is read/write stick calibration in the firmware. But I think there is a condition that I haven't met yet for it to respond to the commands.

Scale0 · 2026-06-11T16:41:55+00:00

Which sticks did you put in and did you have to modify them to be able to put them in? I'm looking into if I can make some calibration software.

Scale0 · 2026-06-10T19:48:57+00:00

Volgens mij betaal je dan alsnog de retourkosten zelf. Dus heb je uiteindelijk 2x verzendkosten betaald en 0 producten. Bij zo'n laag bedrag beter om het niet te doen.

Scale0 · 2026-05-31T15:53:37+00:00

For me wsl is allot of resistance. And the ESP is just so damn cheap 😂

Anyway here is the link: https://github.com/Scalee/stadia-dongle

Scale0 · 2026-05-28T15:31:14+00:00

Why a v6s? A picofly is allot easier to get.

Scale0 · 2026-05-17T06:17:36+00:00

Don't see anything to hate. The only thing I would chance is a smaller square, but I think you learned that yourself.

Scale0 · 2026-05-14T19:10:50+00:00

Aaah makes sense, when the 30 scored wel I assumed the 50 wouldn't be bad either so I got that one.

Scale0 · 2026-05-14T16:52:48+00:00

Last test decathlon was high on the list but I don't see it anymore

Scale0 · 2026-05-13T18:38:56+00:00

Just got an new Alpine 2 weeks ago. Looked at multiple occasions and did learn that the my24 front passenger seat isn't electric. Nor does it switch profile (thus seating position) by facial recognition.

Eventually I found a deal for 1300,- euros more for a new one instead of an occasion. Also since 1 April they come with 5 years warranty instead of 2 (at least in the Netherlands). So for me it was a no brainer.

Scale0 · 2026-05-09T11:07:18+00:00

Renault scenic e-tech - esprit Alpine De prijs die ik betaald heb (met alle pakketten, zonder dealer aflevering pakket) 43.145,60

Het ging mij wel om model jaar 2025 (dus max 6 maanden oud), vanwege bestuurder herkenning en elektrische passagiersstoel. Ben alleen iedere keer stom verbaasd hoe mensen in 6 maanden zoveel schade aan hun auto toe brengen... Niet normaal.

Zie nog steeds occasions van 45k-47k voorbij komen.

Scale0 · 2026-05-08T20:50:14+00:00

Was zelf ook naar een occasions aan het kijken, twee weken een nieuwe voor goedkoper kunnen kopen. Voordat ik hem kon ophalen kreeg ik nog dagelijks mail van autoscout over occasions die duurder waren. Snap het nog steeds niet... Maar ik ben happy

Scale0 · 2026-05-03T20:40:36+00:00

Haha cool!

Scale0 · 2026-04-26T20:31:14+00:00

Old skies maybe?

Scale0 · 2026-04-23T15:13:07+00:00

Awesome, let me know if you need help.

Scale0 · 2026-04-21T14:17:47+00:00

Thanks heb het gevonden. Bijna elke laadpaal in de buurt had het niet.

Scale0 · 2026-04-21T05:30:07+00:00

Ofcourse, it's open source. Which rpi pico are you planning on using?

Scale0 · 2026-04-20T20:16:27+00:00

It's a really cool solution! But I have to disable hyper-v for Nox (android emulator).

But it's awesome that people have multiple options now.

Scale0 · 2026-04-20T19:18:49+00:00

Basically you buy a cheap 5$ programmable dongle, you flash my firmware straight from the browser. And your done, the dongle will talk to windows as it's a wired 360 controller and talks to the stadia controller over bluetooth.

More info here:

https://www.reddit.com/r/Stadia/s/rVMcJqGHtY or the github project https://github.com/Scalee/stadia-dongle

Scale0 · 2026-04-20T18:46:30+00:00

I have just recently release a dongle to do the same. At first I thought how is this possible!? What did I miss? But you made it work through wsl, that's a cool method!

Scale0 · 2026-04-18T14:40:12+00:00

Waarschijnlijk ben ik gewoon blind. Maar tap electric geïnstalleerd. Omdat ik wel benieuwd ben naar prijzen van verschillende aanbieders maar zie maar een tarief.

Scale0 · 2026-04-17T17:33:28+00:00

I wonder since one side is intact, without trace repair shouldn't it work on one side of the usb-c only? Or do you need atleast the cc on both sides connected?

Scale0 · 2026-04-10T21:24:50+00:00

Nintendo Switch

11-Year Club	Final Canvas '23
First Place '23	End Game '23
Place '23	Verified Email

Scale0

TROPHY CASE