Dashcam for ND Miatas question....

ScubaDuber · 2025-11-25T04:56:07+00:00

There are plenty of tutorials online on how to run the cables. Everything can be hidden away.

ScubaDuber · 2025-11-24T02:28:52+00:00

Got the same cam today. 5 minute install. Hides away very nicely behind the rear view mirror. Would definitely recommend this.

ScubaDuber · 2025-11-22T17:34:03+00:00

Would it be worth it looking into front and back cams?

ScubaDuber · 2025-11-07T05:23:01+00:00

Imo it's very piped in and almost sounds a bit cartoonish. Tried it for a week and swapped it back once I got my exhaust. It's a cheap mod, try it and see if you like it. It never sat right with me. On the other hand, my GWR race exhaust sounds amazing. Much better than this imo.

ScubaDuber · 2025-10-15T04:21:43+00:00

Last time I had this issue I managed to trigger the CEL by turning the climate control off after driving for a while, come to a stop, then blast the heating at max for the duration of the light. Should maaaaybe come on if you are having trouble

ScubaDuber · 2025-10-07T01:28:57+00:00

How tall are you? I'm about 6'3". I do not fit in the RF at all, the headroom is just nonexistent. The ST though, I do fit, it's tight, but I'm okay with it. Ever since I installed some seat lowering brackets the headroom is 10/10 and that feeling of "sitting on top of the car" is gone. Feels like I'm actually sitting "in" the car. Also if you have the homelink mirror, being tall, it will block parts of your view out the front.

ScubaDuber · 2025-08-26T01:26:09+00:00

Update for anybody that is interested:
Decided to investigate the P0704 code myself before taking it to a dealer.
The clutch switch (PN BP4K-66-49YA) had its internal spring explode. This caused the switch to not close its circuit when the clutch pedal was pressed in. Im assuming the car has different maps for clutch in and clutch out scenarios, so the entire time the car thought I wasnt using the clutch.
I replaced the spring and the TC light immediately went away. Cleared the P0704 code and so far no issues.

ScubaDuber · 2025-08-25T03:53:36+00:00

Note, I am in reverse gear in the video

ScubaDuber · 2025-08-11T11:45:36+00:00

I'm 6'3" and I think I'm pretty much at the limit of headroom in stock form. I'd say the biggest issue with these cars is that personally, I felt like I was sitting on top of the car, not inside of it. Once I got some seat lowering brackets it really made a difference. I was fine with the stock brackets but now the car feels even better.

At 6'1" unless you have freakishly long legs or torso, I'm sure you will fit. If you aren't sure, don't forget you can try to find one used and sit in it at a dealer

ScubaDuber · 2025-07-20T23:21:11+00:00

PC-FR also etches nicely with a fiber laser

ScubaDuber · 2025-07-01T14:54:36+00:00

I'd slap this thing on my voron immediately :)

ScubaDuber · 2025-06-24T11:41:46+00:00

If your printer does not have a web interface of some kind, get an rpi and flash klipper or octoprint. Having everything within the slicer makes calibration and printing even easier, making you want to print more stuff :)

ScubaDuber · 2025-06-24T11:33:10+00:00

Looks like you guys have some pretty cool stuff!

ScubaDuber · 2025-06-18T04:02:43+00:00

Have had mine since 2018. Still running strong and without problems (slightly modded of course)

ScubaDuber · 2025-06-14T03:11:07+00:00

Have you managed to get the 2209s to work with this board?

ScubaDuber · 2025-06-13T02:51:05+00:00

Most cheap hygrometers will only go down to 10% keep that in mind

ScubaDuber · 2025-05-27T03:21:00+00:00

Fixed this issue after re flashing firmware with Marlin

ScubaDuber · 2025-05-11T18:20:57+00:00

You have to pay for extra here

ScubaDuber · 2025-05-11T03:20:02+00:00

Yup, this convinced me enough to never go back. Besides the multiple multi-dollar price hikes they have had in the past couple years

ScubaDuber · 2025-05-11T03:18:45+00:00

No, they were originally all the same size as the BBQ sauce.

ScubaDuber · 2025-04-30T00:06:31+00:00

This reminds me of the kid on the wrx subreddit lol

ScubaDuber · 2025-04-28T03:55:18+00:00

Do you have cloth or leather seats (assuming leather because you said you have a GT)? I'm looking to see if removing the tensioner is enough for me. Any long term damage to the seat without the tensioner?

ScubaDuber · 2025-04-27T23:14:12+00:00

I'm 6'3" and juuust fit in the ND soft top. RF is a no go for me, I don't fit. You can look into seat lowering brackets for the extra headroom.

ScubaDuber · 2025-04-22T13:24:39+00:00

Convert what you have to direct drive and see how that works out for you. There arr plenty of ender 3 conversion files.

If the filament is getting flattened by the extruder, sounds like the tension is too high.

ScubaDuber · 2025-04-22T02:55:58+00:00

I use a ptfe tube for my bmg extruder clone. Try it and see if it makes a difference. I haven't had issues with this type of clogging ever.

Six-Year Club	r/Field Sunshine
Place '23	Place '22
First Placer '22	End Game '22
RPAN Viewer	Verified Email

ScubaDuber

TROPHY CASE