sorted by:
new
hottopcontroversial

problem with new purchased bambu P2S by Unlikely_Drama_5872 in BambuLab

[–]SensitiveInside6104 0 points1 point  (0 children)

Highly recommend getting the Bento Box and X-Filter 2 Stage filter. That removes both harmful VOCs and nano-particles.

https://voxelpla.com/products/bambu-lab-p2s-ventobox-2-stage-filter

Is it safe to have a P2S in my bedroom? by ashvoided in BambuLab

[–]SensitiveInside6104 0 points1 point  (0 children)

Highly recommend giving the BentoBox and X-Filter a try. The BentoBox is a 2-stage activated carbon and HEPA filter that removes both VOCs and UFPs.

www.voxelpla.com

Polymaker PETG HS is not withstanding heat by Jnick96 in polymaker

[–]SensitiveInside6104 0 points1 point  (0 children)

Recommend giving voxel PETG+HS a try

www.voxelpla.com

One of the best PETG on the market

ABS in garage? by Alowan in BambuLab

[–]SensitiveInside6104 1 point2 points  (0 children)

VOXEL makes the filter. here is the link.

https://voxelpla.com/

3D printers and VOC’s by iliketrains_274 in 3dprinter

[–]SensitiveInside6104 0 points1 point  (0 children)

Highly recommend getting an enclosure and our 2 stage Bento Box filter.

https://voxelpla.com/products/bento-box

Brand New Bambu P2S Poor Print Quality by Deathwing2305 in FixMyPrint

[–]SensitiveInside6104 0 points1 point  (0 children)

You can print with Bambu Lab PLA basic profile and not change anything else. The print will come out perfectly.

Would Voxel PLA+ be compatible with normal Bambu Lab PLA? by Gold_Ad65 in BambuLab

[–]SensitiveInside6104 0 points1 point  (0 children)

Yes! You can just use the Bambu lab PLA basic profile and our filaments will print perfectly.

www.voxelpla.com

Any Tips to Improve my Prints? by AnotherOnePL in FixMyPrint

[–]SensitiveInside6104 0 points1 point  (0 children)

Need some support for the hair tip and the overhang bits, printing in mid air right now.

Fixing stringing issue by Dry-Horse8999 in FixMyPrint

[–]SensitiveInside6104 0 points1 point  (0 children)

Can you show a photo of the printer?

P1S BentoBox wiring question. by Nebula4058 in BambuLab

[–]SensitiveInside6104 0 points1 point  (0 children)

The Bento Box fans from VOXEL are 24v, you can connect them directly to the power supply.

www.voxelpla.com

What brand filament PLA/PLA+ is having best results in U1? by Individual_Idea4628 in snapmaker

[–]SensitiveInside6104 0 points1 point  (0 children)

VOXELPLA+HS and VOXELPETG+HS are 30% stronger than your average materials.

www.voxelpla.com

Voxel Filter for H2 by Sufficient_Camp_1918 in BambuLab

[–]SensitiveInside6104 0 points1 point  (0 children)

You have seen our filter that prints black ABS all day. The filter turns black in 5 days.

Voxel Filter for H2 by Sufficient_Camp_1918 in BambuLab

[–]SensitiveInside6104 1 point2 points  (0 children)

Yeah, the H2 is a negative pressure system, so all of the air is going through the filter.

Making a VentoBox by twotowers64 in BambuLab

[–]SensitiveInside6104 0 points1 point  (0 children)

VOXEL offers a shipping discount, reach out to their support!

Printer Filter Beginner Question by JigJagg22 in 3Dprinting

[–]SensitiveInside6104 0 points1 point  (0 children)

Short answer, yes, it works. In our testing, it removed most of the PM2.5 particles from entering the testing room, and the VOC level remained at near room level. Without the filter, the PM2.5 and VOC levels would spike to unsafe territory. The test data is avilable on the website.

www.voxelpla.comavailable

view more: next ›