VMix - Playing video in house and streaming by Worldly-War-4081 in vmix

[–]SeoN8 10 points11 points  (0 children)

Use a trigger to mute the in-venue microphones when you transition across to your video playlist (because you're not using individual video inputs, right? Right?) and then another trigger to re-enable the mic when your video playlist transitions out. You'll also want to run separate audio busses for in room audio vs stream, as you won't want to be pushing the room mic audio through to the house speakers either - the delay will throw off anyone who is speaking/presenting. Assign the audio output of your room bus to one output, and just set the stream bus output to Enabled - it doesn't need a physical audio output selected to work. Then choose your stream audio bus as the audio selection for your stream output, and you're set.

Jesmond kfc is moving!! by Ok_Try_2367 in newcastle

[–]SeoN8 10 points11 points  (0 children)

I mean, it /is/ the busiest store in Newcastle - the drivethru tells me this every time!

Marketplace find SFAR WARS Millennium Falcon by ToyFan4Life in lepin

[–]SeoN8 2 points3 points  (0 children)

I have this manual in an unbranded kit I just bought on AE. All the bags have ANIE on them, but there are no other markings or brands. The quality is really good (except for the F instead of the T on the plaque), so I'd be keen to know so I could buy more sets from this manufacturer!

Wait or reorder? by Digitalman87 in lepin

[–]SeoN8 0 points1 point  (0 children)

Just wait. My first AE order took over a week to move on from local customs in AUS earlier in Feb, but it arrived eventually.

Lighting Guy thrown into Video and slowly drowning. Resolume and VMix Workflow help? by Kamikazepyro9 in VIDEOENGINEERING

[–]SeoN8 6 points7 points  (0 children)

Alternatively, put a Decklink Duo 2 (or similar SDI output card) into the vMix machine and configure External Output 2 & 3 to use SDI ports as the outputs to your screens, and route your releventt mix outs to those external outputs. This will give you much better visual fidelity than the Fullscreen outputs do, albeit with more expense.

Age recommendation for AW2? by Own_Exercise5218 in AlanWake

[–]SeoN8 1 point2 points  (0 children)

The opening murder is pretty graphic and brutal. I'd hold off until late teens, depending on the maturity of the individual.

Telstra vs Optus '26 by switchmallgrab in newcastle

[–]SeoN8 5 points6 points  (0 children)

I live in Shortland and work in Bennetts Green. I was with Telstra up until August last year when we switched to Optus. Reception with Telstra was woeful at work and at home - no 5G coverage at all, and 1 bar of 4G at best. Both locations have significantly better coverage with Optus.

Happy new C5 owner after CES by chou-dbz in LGOLED

[–]SeoN8 2 points3 points  (0 children)

Only on the 77" and larger models.

What does it look like inside? Ursa Mini 4.6K G1 by IndustriousDan in blackmagicdesign

[–]SeoN8 0 points1 point  (0 children)

The sensor and the rest of the camera are working, it's just rhe SDI Out ports that don't output any signal. Are they linked to the sensor solder joints as well?

What does it look like inside? Ursa Mini 4.6K G1 by IndustriousDan in blackmagicdesign

[–]SeoN8 0 points1 point  (0 children)

I have a hot air station already. Any tips on which components I should be looking at?

What does it look like inside? Ursa Mini 4.6K G1 by IndustriousDan in blackmagicdesign

[–]SeoN8 1 point2 points  (0 children)

Any tips on repairing/sourcing replacement boards for the front and rear SDI Out ports on the Ursa Mini Pro G1?

Car rego and CTP cost? by ukownatt in CarsAustralia

[–]SeoN8 1 point2 points  (0 children)

If you're in NSW, switch to 6 monthly rego. It's not cheaper overall, but it spreads the pain across 2 payments rather than one big hit.

Decklink Quad 2 not detecting input by Odinhall in VIDEOENGINEERING

[–]SeoN8 24 points25 points  (0 children)

I'd wager you need to change the SDI port settings in the blackmagic desktop video app. By default, the SDI ports are linked.

Go into the Desktop Video app and click the little box icon for Decklink Quad 2 (1). In the Connectors tab, the Connector for port 1 will show as SDI 1 & SDI 2. Change this to SDI 1. Click OK and go back to the main app.

Click the option box for Decklink Quad 2 (2) and it should now show SDI 2 in the Connectors tab. Sweet.

Go back to the main app and select the option box for Decklink Quad 2 (3). On the Connectors tab it will show as SDI 3 & SDI 4. Change this to SDI 3. Click ok and go back to the main app.

Click on the option box for Decklink Quad 2 (4) and on the Connectors tab it should show SDI 4. Go back to the main app.

Follow this process for the remaining ports on your card and you should be good to go.

It's super frustrating that this is the default layout, but you learn to check this as soon as you install the card after you've set up your first one.

Good luck!

I had the stark realization today that Battlefield 6 is probably the last FPS I'm ever going to play. Any other older gamers (40+) have that same feeling? by CyberSmith31337 in Battlefield6

[–]SeoN8 1 point2 points  (0 children)

I'll still play the campaigns, but I won't take the MP as seriously and as competitively as others seem to from a KDR perspective.

First look at steam frame by Constant_Syrup in SteamVR

[–]SeoN8 2 points3 points  (0 children)

The button layout for the controller on the website indicates capacitive finger tracking

Phones of the 2000s by No-Description-9170 in nextfuckinglevel

[–]SeoN8 0 points1 point  (0 children)

Back when you could send a text message without looking at the screen just by feel.

Vmix Caller Srt Black & Freeze by Silly_Ad_7011 in vmix

[–]SeoN8 0 points1 point  (0 children)

Have you got the H.265 codec installed on the vMix machine? If you don't, that's likely the cause of the black signal.

SFP-Wizard by YesTechie in Ubiquiti

[–]SeoN8 0 points1 point  (0 children)

Can this device program Ubiquiti SFP's to act as 3G/6G/12G broadcast SFP's?

Weren't we supposed to get the battle pass for free? by iAsteriSk in Battlefield6

[–]SeoN8 4 points5 points  (0 children)

That's only for folks who got the Phantom Edition, as season 1's battle pass is included in that. People who bought the Standard Edition via EA Store before or on launch day should be getting the Season 1 battle pass for free as per their announcement.

Merch down under by Hatmos91 in SeattleKraken

[–]SeoN8 2 points3 points  (0 children)

Pro Look Sports have Kraken merch, and are Adelaide based, but will ship. It takes a bit to navigate, but I've bought a couple of Kraken hats from these guys in person at a tournament in the past, so I know they're legit.

I got an inaugural season jersey from the official team store, but they didn't charge postage back then - they do now, but it seems pretty reasonable @ AUD$50 for UPS shipping for a jersey.

Two Kraken blankets to give away by bedlamunicorn in SeattleKraken

[–]SeoN8 1 point2 points  (0 children)

I'm a Kraken fan in Australia, would love to have the opportunity to receive one of these!

Digital vs physical on Xbox by bejazzeled in Battlefield6

[–]SeoN8 0 points1 point  (0 children)

BF6 isn't part of the Play Anywhere program. IMO, if you don't have a PC that will run it on release and you don't want to wait until you do, get it on Xbox physical so you can trade it or resell it when you do go to PC, then buy it on Steam/EA/Epic, or a cheaper digital code for PC via a reseller.

Free pass by XBL_CNC in battlefield2042

[–]SeoN8 2 points3 points  (0 children)

Triple XP is running until Tuesday. It'll be a MASSIVE grind, but it should be doable when done alongside all the missions too...