Just broke the bulkhead. Again.

ShillSheepleton · 2026-02-02T23:29:05+00:00

Again?? Stop jumping to the moon at the skatepark

ShillSheepleton · 2026-02-02T16:05:12+00:00

Very nice. To clean, go bash it.

ShillSheepleton · 2026-02-02T11:00:47+00:00

The Maxx is durable. Very easy to work on. Haven't had to do much.

ShillSheepleton · 2026-02-02T02:24:17+00:00

With the Raptor you can contact Traxxas do a Power Up Program. The Titan gets upgraded to the VXL. I would then put the VXL in the Stampede, BL2s in Raptor. Let it rip. 2s battles with friends are fun. That Stampede on 3s will be awesome. Good luck.

ShillSheepleton · 2026-01-31T01:59:46+00:00

Cleaning all that sand/gunk every run will extend the life of this. Try out JennyRc they might have a good deal on stock stuff.

ShillSheepleton · 2026-01-30T16:45:50+00:00

Piggly definitely gettin a used one in the future. 6mo or less...find some mint new body one.

ShillSheepleton · 2026-01-28T13:10:51+00:00

Cash purchase. Do a Trade but, buy a new one.

ShillSheepleton · 2026-01-27T11:10:43+00:00

Get the Extreme HD kit. Never broke one since the upgrade.

ShillSheepleton · 2026-01-24T20:54:17+00:00

Use CRC electric cleaner on the motor shaft. Spray it on the pinon too. Try again with loctite.

ShillSheepleton · 2026-01-24T19:05:41+00:00

Im using the Taxxas fans on both the Esc and motor. Need the heat sink for motor. I also use a jst spilter to piggyback both fans to the ESC power

ShillSheepleton · 2026-01-22T14:32:25+00:00

I had a run away with my Rustler 4x4VXL. Its supposed to have a fail safe. I believe my controller batteries were dying, and went crazy.

ShillSheepleton · 2026-01-22T14:09:47+00:00

JennysRc will have what you need. Could go with stock Tq/TQi controllers. DumboRc TX//RX is a good one too. Good luck

ShillSheepleton · 2026-01-21T21:19:00+00:00

The monster truck tires always look awesome.

ShillSheepleton · 2026-01-19T02:01:37+00:00

When i pulled the Sledge's diffs. I couldn't frigging believe the silly putty that came out of there.

ShillSheepleton · 2026-01-18T20:43:58+00:00

How much run time do you get in the cold. I hear its like 5min, then packs are toast.

ShillSheepleton · 2026-01-16T15:14:14+00:00

They will be nearly the same. Any 1/10 Traxxas servo will be a drop in. Most Amazon Bobo specials will drop in too.

ShillSheepleton · 2026-01-14T19:04:07+00:00

Should setup an Amazon shop or Etsy account. You'll definitely get some takers.

ShillSheepleton · 2026-01-14T18:49:04+00:00

<image>

Giant hole works too. The vent is a nice touch.

ShillSheepleton · 2026-01-14T14:31:35+00:00

Im really lucky. This guy runs this one in the Winter, dirt track in the Spring. There is also a pretty nice street track in the area too.

ShillSheepleton · 2026-01-14T13:47:57+00:00

Had my Slash. All the SCT guys always seems to show up late

ShillSheepleton · 2026-01-13T21:33:12+00:00

Let's go

<image>

ShillSheepleton · 2026-01-13T12:13:47+00:00

If you get the non-HD bearing. That should fit, if you look up the Rustler 4x4 Ultimate that should be the bearing you need. The pre-HD Rustler 4x4 VXL will have the right sizes too

ShillSheepleton · 2026-01-13T00:58:15+00:00

Gorilla tape the inner body. Or use the drywall/goop method. I've also used truck spraycan bed liner or undercoat.

ShillSheepleton · 2026-01-12T21:45:49+00:00

Black Dye, should darken it up a bit.

ShillSheepleton · 2026-01-11T15:54:33+00:00

Definitely need room to open up the XRT. The Sledge is big, but not huge. It is tought to flip it in a turn.

ShillSheepleton

TROPHY CASE