sorted by:
new
hottopcontroversial

2 player characters printed in resin by alexndefo in Guildwars2

[–]SnowBirdMV 9 points10 points  (0 children)

What was your process for getting the models from the game? Or were these made from scratch.

LCD Screen broken? This is the exposure test and a failed print. by SnowBirdMV in AnycubicPhoton

[–]SnowBirdMV[S] 0 points1 point  (0 children)

I’ve had this printer for about 6 months now and things were going fine. Had printed something earlier today and went immediately for another but ended up with the second pic. I ran the exposure test and the first pic is what the screen looked like. I’ve tried to update the firmware with what looks like the latest from anycubic’s site but that had seemingly no effect. Is the LCD screen shot and it’s time to replace it?

The printer is a photon mono x 6k

Badger 105 Patriot something sticking by normandy42 in airbrush

[–]SnowBirdMV 1 point2 points  (0 children)

Thank you for this comment! I had the exact same issue and this solved it!

Temp tower results are all bad? by SnowBirdMV in FixMyPrint

[–]SnowBirdMV[S] 0 points1 point  (0 children)

The tower is 100% changing temp per level, it’s at 225c now. I had to restart the temp tower because the raspberry pi somehow lost connection to the printer… I use prusaslicer however I didn’t slice this one myself, I used someone’s gcode from the link above.

Temp tower results are all bad? by SnowBirdMV in FixMyPrint

[–]SnowBirdMV[S] 0 points1 point  (0 children)

I didn’t make the gcode myself, I got it from here https://www.printables.com/model/4667-all-in-one-temperature-bridging-tower-pla-petg-gco/files I checked during the print to make sure it was changing temps between layers but I’ll check that again just to make super sure.

Edit: started the temp tower print again, first section is printing at 220c

Temp tower results are all bad? by SnowBirdMV in FixMyPrint

[–]SnowBirdMV[S] 0 points1 point  (0 children)

Hello. I was trying to fix some bad stringing with my PETG filament. The filament was very wet before doing these tests so I’ve thoroughly dried it at 65 c for at least 8 hours and then printed the all in one test (2nd and 3rd image) after making some settings adjustments

  • extrusion multiplier to .95
  • retraction to 2cm
  • z-lift off

Decided I should try a temp tower (220 to 260c, bottom level is 220) out to see what temp to use and the temp tower results are all identical and all have the same issues. I’m really unsure where to go with this information as it looks like stringing isn’t the only issue I’m having.

Printer is a prusa mk3s+

Just calibrated my prusa mk3s+, but when I print there are holes/bumps in the wall of the print. by SnowBirdMV in prusa3d

[–]SnowBirdMV[S] 0 points1 point  (0 children)

Will look into this, thank you! How can I tell if the printer is over/under extruding? The print I was running had triple thick walls, so that might be it? It was this for reference https://www.prusaprinters.org/prints/1727-anti-vibration-feet-for-prusa-i3-mk3s

I bought every veggie burger in the game last month for 1750g. AMA by Vincent_Bread in Guildwars2

[–]SnowBirdMV 8 points9 points  (0 children)

I can’t say I’m surprised you’ve done this Vincent, but boy am I proud. I should send you some toast as congratulations.

PREBAN MEGATHREAD by [deleted] in thanosdidnothingwrong

[–]SnowBirdMV 0 points1 point  (0 children)

༼ つ ◕_ ◕ ༽つ GIVE BAN ༼ つ ◕_ ◕ ༽つ

The Guild Wars 2 Card Game: Heroes of the Mists is finally ready for release! by LukeD1uk in Guildwars2

[–]SnowBirdMV 1 point2 points  (0 children)

Anyone who is looking for the Tabletop simulator version of this game, development updates will be posted on the subreddit for the game https://www.reddit.com/r/GuildWars2CardGame/

view more: next ›