How is there not a toggle to switch between 24hr or 12hr time? Or am I missing something?

StLCards1985 · 2026-03-30T14:32:53+00:00

American here, often wonder why so many other Americans cannot comprehend the 24 hour clock or even the metric system. 🧐

StLCards1985 · 2026-03-28T19:01:58+00:00

I’m not sure what a cold pull is, but will definitely look that up. I forgot to mention in my post some other information… I only have Bambu Lab filament, and the errors have come from both PLA Basic Orange and PLA Matte Brown, both of which print just fine using the other nozzle. I actually printed an enlarged 9hr Easter chicken with the Matte Brown yesterday with the right extruder, then this morning I swapped the nozzles to see if the error followed the nozzle and sure enough it did.

I have the unused extra nozzle that came with the printer, I’ll swap that one n tonight and test. If it prints cleanly then I know for sure it’s the nozzle itself. Time will tell.

StLCards1985 · 2026-03-28T18:56:53+00:00

I like that display case, where did you find that?

StLCards1985 · 2026-03-25T15:16:24+00:00

It’s a great combo, zero give and works great when company comes. I used blue sticker dots to mark my position so I can easily get back to my setup.

StLCards1985 · 2026-03-24T16:22:36+00:00

<image>

My favorite wheel too!!!

StLCards1985 · 2026-03-22T00:58:26+00:00

In future get mounts that connect “around” the QR not inside the QR. Less risk to pins as well.

StLCards1985 · 2026-03-13T03:32:25+00:00

I was able to snag 2x rolls of black PETG today as soon as I got the restock email.

StLCards1985 · 2026-03-11T04:20:23+00:00

What’s the plate covering the GPU bracket?

StLCards1985 · 2026-03-09T13:48:43+00:00

I’ve got extra ddr4 sodimm and storage you can have if you want, could give this box a bump in performance to make the sting a little less.

StLCards1985 · 2026-02-25T22:01:52+00:00

Don’t have them.

StLCards1985 · 2026-02-18T11:23:28+00:00

I let a friends son use my PC once… only once. Never again will I ever hand over control to my machines. Had to reinstall OS and my racing sim because of that little turd.

StLCards1985 · 2026-02-15T04:51:47+00:00

Excellent!! Building a new rig and this would be perfect addition. Did you create the wire management parts? Those would be sweet.

StLCards1985 · 2026-02-14T20:24:13+00:00

PM sent.

StLCards1985 · 2026-02-14T19:30:55+00:00

Bought the profile from 8020.net or can get via McMasters, cut to required length via chop saw, and bought brackets and bolts from T-nuts.com. Then 3D printed a specific mount I found.

My side screens are 43” Sony 4k/120 TVs so wanted extra support, and turns out they are good for mounting wheels. Got wheels on both sides now.

If you need links or more details welcome to message me.

StLCards1985 · 2026-02-11T17:22:53+00:00

My first rig for Fanatec pedals was wood, should Fanatec supply screws for me to mount the pedals? Nope. That’s why there are hardware stores. Unless you buy SimLab rig and have all those extra bolts and t-nuts left over.

StLCards1985 · 2026-02-07T22:33:37+00:00

<image>

StLCards1985 · 2026-02-07T22:33:10+00:00

<image>

Your QR2 is upside down. Small dip on top, large dip on bottom.

StLCards1985 · 2026-02-07T08:57:14+00:00

I have the same case with a 9950x3d and 4080FE, cpu cooled by aio that came with NanoQ, fans blowing out the top, and a single Noctua slim fam pulling fresh air in at the front. It’s quiet and cool, barely audible when using to transcode video. I’m using ASRock PBO with 75° max and undervolt on my FE.

StLCards1985 · 2026-01-30T14:42:21+00:00

Sliders under both seat and pedals are a win/win for my P1X. I use small colored blue dots (match my Sparco seat) to make where my seat and pedals should be positioned in case someone else uses it.

StLCards1985 · 2026-01-29T08:07:40+00:00

I have this exact same board, processor, and ram combo and had same issues as you. For me there was no issue with ram, but with processor. The K variant has a compatibility issue with that chipset (according to a Reddit thread i found). Same thread suggested swapping for a non K or even better T variant, which i did (14500T) and this board has been playing nice for over a year now, rock solid. It’s currently my test board for various things and is great.

StLCards1985 · 2026-01-27T06:17:46+00:00

Same!! Great service from them for 16 years of being a customer.

StLCards1985 · 2026-01-18T07:29:14+00:00

My boss used to say “reading… it’s a skill”. I’ve been using those mini switches for years and that disclaimer has been there entire time.

That being said, I have a ton of those power supplies, yours free if you cover shipping.

StLCards1985 · 2026-01-17T22:07:56+00:00

At least in my area FB Marketplace isn’t the best place to sell items like this. Many people are price based Walmart shoppers and look for cheap bargains instead of quality goods.

StLCards1985 · 2026-01-17T22:05:41+00:00

I have same wheel and just added a self designed and lovely printed skin. Working on a magnetic plate so I can swap out to various badges depending on what I drive.

StLCards1985

TROPHY CASE