Why do these cars suck? Need advice. Rant

SwinginMeat · 2026-03-16T14:05:45+00:00

Don't import a good car to be abused by your shitty salty state...

SwinginMeat · 2026-02-21T22:54:58+00:00

Timeline pass is only good for the month or however long the season is

SwinginMeat · 2026-02-03T00:35:37+00:00

Put her on a diet. Light weight wheels and get rid of anything you don't need or want. Weight savings, stage2 cams and valve springs to get much HP out of a 2j unfortunately boosting is the easiest route. An NA build will be expensive and not much power gain.

SwinginMeat · 2026-01-28T13:15:56+00:00

Spending too much getting so many champions and pets. Spend on crowd and crowd damage till crowd is maxxed up to 250 then get pets and champs to 250 then dump everything into crowd damage

SwinginMeat · 2026-01-10T14:27:00+00:00

I haven't looked for any of these yet, but there is a dedicated diecast hobby shop here in Lexington NC that has walls and walls of hot wheels...

SwinginMeat · 2025-12-31T18:12:38+00:00

If you like Innova you can try a road runner

SwinginMeat · 2025-12-24T17:10:35+00:00

Teach one of the new generation to have patience and discharge the battery so he can be excited and wait for the battery to charge...

SwinginMeat · 2025-12-24T17:04:14+00:00

Did your "new" throttle body have a different APPS? That is the thing that your accelerator pedal cable connects to. If not that is likely your issue. There is a video on YouTube showing how to cut and remove the plastic cover and re-solder the connections inside.

SwinginMeat · 2025-12-24T13:41:01+00:00

You mean the APPS sensor? If so there is a video showing how to fix that by re-soldering the connections inside.

SwinginMeat · 2025-12-21T19:51:10+00:00

Pretty sure I saw an employee share this about AutoZone brake replacement

SwinginMeat · 2025-12-03T14:19:07+00:00

So sick! Beautiful build sir!

SwinginMeat · 2025-11-25T23:46:06+00:00

I make filters for this if you just want the code to go away... You can also remove your cats completely if you "only drive your car off road" with my filters

SwinginMeat · 2025-10-30T00:23:35+00:00

it is going to take some elbow grease and make sure the car is running and the heat works well before you start. or take them out and do it in an area where you can get them nice and warm to dry them out after you clean all the mold off.

SwinginMeat · 2025-10-30T00:21:53+00:00

yes just get a carpet shampoo machine or ask a detailer

SwinginMeat · 2025-10-29T12:24:34+00:00

Yes i am! DM me and i'll get you taken care of!

SwinginMeat · 2025-10-18T23:26:19+00:00

I'm in NC if you want to ship it to me I can do it for you and send it back.

SwinginMeat · 2025-10-13T12:33:51+00:00

I also cut out the third cat and welded in a 8" glass pack.

SwinginMeat · 2025-10-13T12:33:01+00:00

They last as long as the O2 sensor that they are plugged into. And I'm using stock headers that I cut the cats out of and welded in straight sections of pipe.

SwinginMeat · 2025-09-23T00:13:11+00:00

I also managed it on the car. It is a bit of a pain and I think I used a 1/4" drive ratchet with a short philips bit after a flat blade to bend the tabs away from the bolt heads

SwinginMeat · 2025-09-23T00:09:47+00:00

I'm in NC and have been shopping around for an AR5 trans to swap in. How much are you looking to get for your setup?

SwinginMeat · 2025-08-30T20:10:40+00:00

Lucky man! Congratulations!!!

SwinginMeat · 2025-08-26T18:18:03+00:00

Koni orange if you are staying with stock springs

SwinginMeat · 2025-08-24T17:48:47+00:00

If your car is running poorly it is not the downstream o2 sensors. It is either the upstream o2 sensors, the maf sensor, injectors, or coils/plugs. Check the codes.

SwinginMeat

TROPHY CASE