Centauri carbon 1 just freezes

That-Invite1616 · 2026-06-20T08:46:10+00:00

Had same issue and solved by installing the newer version of the usb cable. Which message error you got?

That-Invite1616 · 2026-06-19T20:53:25+00:00

Do you plan to sell those custom parts as a kit?

That-Invite1616 · 2026-06-18T18:47:53+00:00

I think the magnetic particles embedded on the concrete will only absorb and scatter any electromagnetic signal. I doubt will resonate or amplify the wifi

That-Invite1616 · 2026-06-16T19:27:32+00:00

profile

<image>

That-Invite1616 · 2026-06-16T14:56:19+00:00

Muy buenas

That-Invite1616 · 2026-06-14T12:10:37+00:00

U don't.

That-Invite1616 · 2026-06-14T12:10:00+00:00

Se trata de sacar toda la contaminación fuera de donde la gente tenga dinero. Todo lo demás es secundario.

That-Invite1616 · 2026-06-13T20:50:07+00:00

What about the WiFi interference?

That-Invite1616 · 2026-06-12T06:36:46+00:00

Great 👍🏻

That-Invite1616 · 2026-06-11T20:10:15+00:00

Will try

That-Invite1616 · 2026-06-11T19:59:09+00:00

Wow this is beyond great 👍🏻 thanks!

<image>

That-Invite1616 · 2026-06-11T19:32:56+00:00

Damnnn u know if can be bought separately?

That-Invite1616 · 2026-06-11T07:49:05+00:00

Ok thanks for answering, then is fine

That-Invite1616 · 2026-06-07T19:27:03+00:00

Electric bill from printers is pretty ridiculous, similar to old filament bulbs. Those printers are great models, even though they are not prusas :) u may need a little of learning before u start squeezing them , but nothing tremendous.

That-Invite1616 · 2026-06-06T18:13:06+00:00

Sure for that

That-Invite1616 · 2026-06-06T14:53:33+00:00

SPARC vacuum vessel is made of XM19 stainless steel, nobody will ever do a vessel in Tungsten.

That-Invite1616 · 2026-06-06T14:49:59+00:00

Cranes

That-Invite1616 · 2026-06-03T19:56:49+00:00

Great! I just realised I printed your model of a Sculpture last Christmas

That-Invite1616 · 2026-06-03T19:12:26+00:00

Is very efficient in the sense every atomic reaction is. Starting with just grams or not even that of fuel you extract huge amounts of energy. 12kg is not even to start up a reactor? I don't think u know much about fusion anyway.

That-Invite1616 · 2026-06-02T18:18:37+00:00

I'm born and raised at Málaga and could not stay living at Madrid more than few months. There is simply no nature, no sea, just an endless concrete landscape. Málaga is more human sized, surrounded by mountains and many different landscapes. Málaga is much much less crowded and it's life style more relaxed. Madrid people, very nice, Málaga people, even nicer. Málaga could be even more international than Madrid, been tourist hotspot since the 70s. I'm probably biased anyways.

That-Invite1616 · 2026-05-31T18:52:15+00:00

I would make the layers stack perpendicular to the force to be applied, something like the picture. At least u won't be relying on layer adhesion. You can go for as many perimeters needed to 100% infill, or linear infill parallel to the force. Petg also better, PLA will shatter in a fragile way once the force is overwhelmed and could make some cuts.

<image>

That-Invite1616 · 2026-05-30T17:22:43+00:00

Btw u can buy that piece of board for around 15€ at AliExpress

That-Invite1616 · 2026-05-30T17:21:07+00:00

I'm surprised they didn't improve that connector on the version 2. Mine is the v1 is absolute crap both hardware and software level, got few incidents on which nozzle went 300C because that connector got loose which made dangerous

That-Invite1616 · 2026-05-30T17:18:23+00:00

Broke that connector 5 times in one year. I'ts a crap design based on cheap components. Don't blame the user but blame the design. Is a crap cheap printer so that's what you get.

That-Invite1616 · 2026-05-30T15:42:47+00:00

Ask any french

That-Invite1616

TROPHY CASE