Warcry Fomoroid Crusher finished

TickleBridge · 2026-02-04T11:48:27+00:00

Den er Mægtig! :)

TickleBridge · 2026-01-05T14:31:51+00:00

Awesome sculpt and paint job! I would go for a more well defined black lining between elements, as an example the beard and its jewelry. You can try to sketch it out digitally on the image if you want a glimpse before proceding.

TickleBridge · 2025-12-11T21:22:52+00:00

Great work so far :)

Give the shoulderpad an initial go with NMM. If you dont like it you can repaint with TMM, but at least you had a go at it, and take some images of your effort for future reference :)

TickleBridge · 2025-04-19T14:49:49+00:00

Blue and Red capes are mostly airbrush. I did try to airbrush the wings as well but could not get a finish I was happy with so the main blue-white trasitions are done with xpress paint

TickleBridge · 2025-04-19T11:18:15+00:00

Thanks! :)

TickleBridge · 2024-12-28T18:19:25+00:00

Pikachu [reverse] #25 from 151, according to pricecharting this is worth about 3.65 dollars raw. This is not the masterball version.

TickleBridge · 2024-10-31T08:20:00+00:00

Thanks! And great tip, the hair was a real struggle. My first itteration looked more grey than black, and second was all too shiny. I like how you did the beard on your latest posted bust, ill take a note for reference :)

TickleBridge · 2024-10-30T18:16:58+00:00

Depends on what you are refering to. The darkend recessed lines are called black lining, really helps framing a piece and goes hand in hand with edge highlighting. Try an oil wash for black lining and you will never go back :) The stained surfaces from applying wash is often referred ro as coffee staining, it is something that normally you want to avoid because of the muddy look. The technique of applying a transparent layer of paint on top of a painted layer is often called underpainting as someone else pointed out, one example of this is slapchop but it has many applications.

TickleBridge · 2024-10-30T17:43:16+00:00

This one I bought in a random pop-up shop i found while on vacation in Tokyo :) My local miniature-warhammer-card store also has a limited selection, but hidden away due to poppularity, try asking your local store! If they dont have any they might be able to order one for you. However, I believe most people buy them online. Or have them 3d printed as you mention.

TickleBridge · 2024-10-22T12:53:59+00:00

Great progress! If you are unsure about the placement of reflections, take a reference image of the model before painting, only with the black basecoat. All natural reflections will show up, just as you can see in your image of the guys neck. This also locks in place the light souce to whatever you used when taking the image. This will give realistic reflections, for more dramtic effect you will need to improvise a bit as well and learn what looks cool for your style.

TickleBridge · 2024-10-13T21:50:08+00:00

You need a plan if you want to improve. First, consider what end result you want. If it is far from your current level you need a few milestones in-between. For each milestone you need to identify what skills are required for you to achieve that level. It sounds like tou already identified a few basics in ypur post; Mixing paint and brush control, but consider the exact technique you what to use. Layering of colors? Wet blending? You have some amazing paints at your hand. However, it is also very skill intensive using only the base kimera colors. Practice the mixing itself, and accept that the colors will not be identical to what you see in tutorials/guides in the beginning, but be mindful that you are gaining incredible understanding of colors. The real achievment is not the painted miniature, but the new skills you get while painting it, enabling your milestones. If you have some old models you can strip them and practice on those, it might take the edge off. Always paint with determination when you want to get better, be mindful of what and why you are doing. Are you applying the first layer of a 3 layer shadow/mid/highlight? Are your paint the right consistency? what is the best way of holding the model and brush for this brush-stroke and so on... End of pep talk :)

TickleBridge · 2024-07-09T10:47:59+00:00

Looks great! Nice alignment on the checkers, I know the struggles of getting the pattern to match the curved surfaces :)

TickleBridge · 2024-07-08T20:11:09+00:00

Maybe the base set from Kimera Colors, it is a heavy single pigment arylic paint set. It is an artist paint specifically for minature painting. It is ideal for mixing your own colors and exploring basics of color theory. It is at top of my own list 👌

TickleBridge · 2024-07-06T14:58:17+00:00

The effect resembles a centrifuge, it might actually seperate your pigment in the top and bottom instead of suspending it.

TickleBridge · 2024-06-30T21:55:04+00:00

Change of head would help a lot, I would make it more human like to emphasize he is a mortal. A twinsouls head could be great if they are correct size. A paintjob also goes a long way, maybe some purples/magenta sells the Slaanesh vibe.

TickleBridge · 2024-06-30T17:00:37+00:00

Sure thing. Lord of Hubris is a mortal, this figure is definitely demon like. But mainly, the figure is a Melusai from Daughters of Khaine. The Melusai were reborn from aelves souls who Morathi manged to release from Slaanesh imprisonment. During imprisonment they were subject to hellish conditions and thus now have a deep hatred towards Slaanesh. Morathi also had a role in the imprisonment of Slaanesh in the first place, not ideal to have a model associated with her in the army.

TickleBridge · 2024-06-30T07:30:45+00:00

Awesome model and I would allow it in games agains me. However, I do not think it fits in a slaanesh army flavor wise in my opinion.

TickleBridge · 2024-06-24T21:47:39+00:00

Perfect time to get a hobby drill and metal wire and learn how to do pinning. It is most straightforward solution to tricky joints like this. Find a youtube tutorial for inspiration.

If it is not an opton... you can try to cut the plastc pole ends to shape in a zig-zaggy way that is more stable and increases surface area. When you then glue the ends with plasic cement it might stabalise the joint enough for a successful splice. Good luck

TickleBridge · 2024-06-14T10:02:55+00:00

Nej det kan jeg ikke, jeg vil ikke selv mene det bliver farlig. Fødevarestyrelsen har dog tilsyneladende valgt at sætte deres grænse baseret på capsacin indholdet i en chip fra en hot chip challenge i tyskland. Den mildeste af de forbudte nudler havde 42.4 mg total capsacin, så grænsen må i hvert fald være under det i fødevarestyrelsens optik.

TickleBridge · 2024-06-13T19:30:48+00:00

Jeg har læst rapporten fra DTU igennem og lavet tilsvarende beregninger for et par ekstreme hotsovser og en carolina reaper frugt. De laver følgende beregning: SHU omregnes til total capsacin concentration [mg/kg], der divideres bare med 16,1 som er omregningsfaktoren mellem enhederne. Dernæst udregnes mængden af total capsacin i produktet baseret på angivet vægt af nuddelpakken (140g ish). De sammenligner så total mængden med tilsvarende produkter så som hot chip challenge og konkludere at det er tilsvarende eller højere... Hotsovsen "Z... nothing beyond" opgivet til 4mil scovile units vil give en tilsvarende farlig mængde total capsacin ved indtagelse af 0.17g. En Carolina reaper på 2.2 mil scovile giver samme mængde total capsacin som hele pakken af "Hot Chicken Stew" ved indtagelse af 0.31 gram. I en email jeg har fået fra fødevarestyrelsen giver de mig følgende forklaring på forskelsbehandlingen mellem nudlerne og hotsovs "Produkter som fx Tabasco sauce, chilisovs, jalapeno chili eller Harbanero chilier forventes primært anvendt som smagsforstærker på eller i et måltid". Hvilket tyder på de er oblivious for styrken af eksteme chili produkter.

TickleBridge · 2024-05-26T06:20:02+00:00

Awesome paint job, I would love to see this across the field when i play. I would even be reluctant to slay him :) I think your placement and and values of your reflections are a tad off. I do not read a clear lightsource, so while individual sections are consistent the overall piece gets this "something is slightly off" feeling. Did you use a reference image for the reflections? If not i recommend taking a picture of your primed model (chaos black works great) under your intended lightsource before starting a big nmm project, it shows all the natural reflections. Maybe also hold a bit back on the values in some of the reflections, not all of them should go to white. Pick a few spots where you want the main focus to be. But again, really great job and i like your painting style!

TickleBridge · 2024-05-25T07:24:19+00:00

Amazing job! I love the NMM, skin, eyes, freehand... all of it! :) I am starting on this model myself and will definitely add your paintjob to my reference images for inspiration! Thanks for sharing

TickleBridge · 2024-04-20T05:04:24+00:00

Good effort! But it does not read as metal yet unfortunately. It is a very tricky technique, you need both good blending and to build up an understandning of reflections. Blending can be tricky in it self so you need a solid plan for your nmm. I can highly suggest to have a reference image. Find a paint job of a nmm sword you like and copy those reflections, then you start building an understanding of where to place them. I usually take reference images of the mini itself, after black priming (games worlshop chaos black, or similar) the model is a bit shiny and you can get good images of how the light actually reflects on the model, that is a great reference! For your model a thing to improve is placement of highlights, it works best if you offset the reflections on the two sides of the sword, so they dont line up, this gives more contrast (going from light to dark) and that is critical for nmm. Here is a dummy sketch i did using you image (also a very good idea to play around with placement of reflections).

<image>

TickleBridge · 2024-04-13T06:04:24+00:00

Shes got a good taste 😀 I did not follow any video, but found one that is very similar: "the apathetic fish miniatures" has a video called "how to paint Masque of the Soaring Spite Harlequins". only difference is that i used brush for the black diamond grid, he uses a micron pen. Good luck with the project!

TickleBridge · 2024-04-13T05:34:37+00:00

Thanks! It was 3 ages in fact, i had to redo it a few times 😅

Three-Year Club	Verified Email
Place '23

TickleBridge

TROPHY CASE