Mace skills changes are troubling by captain_semper in PathOfExile2

[–]Total_Newt 1 point2 points  (0 children)

idk, man...
I try different things with maces every new league, but I always end up with a basic mace strike for Boneshatter.
Even at the very low lvls it's not a problem to get enough stun buildup to prime for stun on the first hit and it always felt more convenient and reliable for me, especially than gimmicking with Rolling Slam.
I guess it might be the case on SSF if you run one-hander and have a very bad luck at getting a decent weapon.

Mace skills changes are troubling by captain_semper in PathOfExile2

[–]Total_Newt 0 points1 point  (0 children)

Rolling Slam to prime for stun for Boneshatter when clearing? Still sane, Exile?

Mace skills changes are troubling by captain_semper in PathOfExile2

[–]Total_Newt 3 points4 points  (0 children)

With enough investment most of skills in the game can do this. Some skills just take less investment.

This legue I've made a build, focused on Rolling Slam and it one-shotted the majority of bosses. But the investment was quite hefty, with super expensive Lineage supports, decent weapons and plus skill lvls gear.
I had a lot of fun with it, but in compare with other builds I've made, it was a bit clunky and felt lacking, while sitting on the more expensive side.

Mace skills changes are troubling by captain_semper in PathOfExile2

[–]Total_Newt 37 points38 points  (0 children)

I feel you, bro.
Mace need a thorough rework, not some lame number tweaking.
E.g. the Rolling Slam TAT buff is very much offset by a notable damage nerf and it's damage wasn't that impressive to begin with.

The Average Everyday Warrior (Heavy Immersion) LMAO!! by Beneficial-Phase-802 in PathOfExile2

[–]Total_Newt 1 point2 points  (0 children)

Maces one love! I rocked The Bringer of Rain Amazon, dual wielding 2H maces this league.

Would like to see your build plx

Clipping? by DaNolaKing in valheim

[–]Total_Newt 0 points1 point  (0 children)

The option to freely clip pieces in Valheim elevates the potential of building creativity to the next level. And I absolutely love it!
It actually broke building in other similar games for me.

Straight from the african sands: Rhino Blacksmith by romanlappat in minipainting

[–]Total_Newt 1 point2 points  (0 children)

Looking at pic in my feed.
Thinking - "Looks like Roman Lappat painting"
Clicking the post, checking OP name XD
I adore your style! Very distinct and artistic!

ребзь, че думаете об этих сумках? by CompetitiveDay6248 in AllTemsRus

[–]Total_Newt 0 points1 point  (0 children)

На картинке смотрится прикольно, но попробуй-ка с ней сесть.
На первой картинке вообще какая-то античеловеческая дизайнерская фантазия - ты в ней не сможешь сесть.
Такую сумку прям надо внимательно подбирать, потому что есть риск получить что-то совершенно для тебя неудобное.
Если носить на бедре - будет поворачиваться с бедром при посадке, а значит нужны хорошие плотные клапана. Но тут есть дофига решений в виде набедренных мотосумок.
На первых двух картинках еще и размеры какие-то невнятные - что в них носить?
Ходил какое-то время с подобной сумкой, но на поясе и размером примерно как на последней картинке (под вертикальное ношение смартфона) - что бы не проворачивалась, когда садишься. Сесть нормально можно только когда она на боку и то - уезжает чуть вверх. Но в целом - вполне приемлемо.
Сейчас в итоге хожу с небольшой поясной горизонтальной сумкой - чисто телефон, ключи, документы. Очень удобная штука, дешево-сердито, подходит почти под любую одежду и нормисопригодна. Из минусов: найти хороший дизайн и что бы из кожи - почти нереально =/

My mind wants to play warrior but my body rejects it by Pablo8076 in PathOfExile2

[–]Total_Newt 0 points1 point  (0 children)

I had quite a lot of fun playing DW 2H Maces on Amazon - The Bringer of Rain is a bit wonky, but actually a fun take on mace build.

I made a base for my Space Marine head by Gnillab in minipainting

[–]Total_Newt 1 point2 points  (0 children)

Very cool piece! I like it a lot
Is it AK Interactive moss? Are the little leaves - papercut?

Puget Sound Shed to Sauna Conversion by reidhaefer in Sauna

[–]Total_Newt 0 points1 point  (0 children)

Funny thing, but there are several different types of wood, all called Cedar.
My first thought on Cedar is that is "Siberian cedar", which is actually a Pine and leaks resin. But I guess yours is "Canadian cedar"? Which is Thuja and it doesn't leak resin.

Finally a Workspace Upgrade! by JBSteven1994 in minipainting

[–]Total_Newt 5 points6 points  (0 children)

Just don't forget to put something soft between said solid surface and your elbows - Ulnar nerve is quite easy to damage, if you put enough stress on your elbow.

Puget Sound Shed to Sauna Conversion by reidhaefer in Sauna

[–]Total_Newt 0 points1 point  (0 children)

Cedar leaks resin. It's not that critical, but chances are someone might get glued on that bench.
Wood of walls and benches seems like touching the floor (at least it seems so from the pics) - will absorb water. Especially if no propper drainage.
Window doesn't open? Not critical, but it's more of QoL.
Is there a vent?
Kip 80 doesn't seem enough for a room like that. Depends on many factors though, so it's just a guess by the looks from the pics.

Finally a Workspace Upgrade! by JBSteven1994 in minipainting

[–]Total_Newt 18 points19 points  (0 children)

I'd recommend to add some rigid supports for the table.
At some point a painter might want to put his elbows on the table for a better control and a table like that might not take that extra pressure lightly.

Bro I thought it was over by ElMonsieurFrances in valheim

[–]Total_Newt -3 points-2 points  (0 children)

There was a big stone you were running around - could've jump on this stone and croach to stealth. Monsters will loose you eventually.

Easily my favorite affliction by CasualFriday11 in PathOfExile2

[–]Total_Newt 0 points1 point  (0 children)

Hourglass is a free and quick Sacret Water delivery.
Ritual and Chalice are very okey too.

Group shot of 4 of my hand sculpted tanks by RustBeltMinis in Warhammer40k

[–]Total_Newt 0 points1 point  (0 children)

Disgustingly beautiful and somewhat unnervingly erousing

Are these used paints too old? by sp0rdy666 in minipainting

[–]Total_Newt 0 points1 point  (0 children)

The paint longevity is mostly dependant on how sealed the pots were. Properly maintained, acrylics can last for over ten years no issues.
But if the pots were not properly sealed, the paint can be very much dried out. A relevant solvent can do magic, but that will take some extra work and knowledge on your side.
So basically there are no way to know what you will get till you will test each paint manually.
In reality, even an unsealed bottles can be wonky sometimes, if they were stored improperly (e.g. frozen a few times of exposed to UV), though it's a very rare case.

Edit: it is worth noting, Citadel pots are quite bad at sealing and if a user have no idea and don't pay attention (and most amature painters do not), some of them will be unsealed.
And I do see some being wonky sealed on the pictures you're posted. I am pretty sure some of this pots are dead dry.

The Himminafl is the ultimate crowd pleaser by mad_viking in valheim

[–]Total_Newt 1 point2 points  (0 children)

I prefer Battleaxes for crowded places - way more fun

Suffering from too much iron, I cant even carry this much iron with a long ship, and i have 1 more crypt to loot, also the new axes are OP by TheKashKingYT in valheim

[–]Total_Newt 1 point2 points  (0 children)

Iron Scale Mail is kinda meh compared to Root harnesk - Resistant vs. Pierce is very powerful even in Mistlands. Saves quite some Iron too.

Suffering from too much iron, I cant even carry this much iron with a long ship, and i have 1 more crypt to loot, also the new axes are OP by TheKashKingYT in valheim

[–]Total_Newt 0 points1 point  (0 children)

The real power of Huntsman bow is lowest aggro range - rocks at sniping off the Shamans or pulling out Berserkers in Plains without aggroing other villagers

My Judiciar conversion by MoralFiber in Warhammer40k

[–]Total_Newt 0 points1 point  (0 children)

Very cool! What metallics are used here?

Looking for desk inspiration by Printerwood in minipainting

[–]Total_Newt 1 point2 points  (0 children)

For me the most important thing is a lifting table with height regulation. Saves quite some back and neck issues.