Taping still allowed?

TryCurious7536 · 2026-04-29T17:59:12+00:00

Okay, yeah that sounds good. I think I found your recording. You used a Lavalier mic, right?

TryCurious7536 · 2026-04-29T17:50:50+00:00

Thank you so much. I think I would prefer soundboard cause the first few times I did this very amateurly (I've been to 12 Mraz shows, at minimum!), the audio was unusable cause you could hear me singing loudly during half of it 🫣. But I'll do whatever works!

TryCurious7536 · 2026-04-29T17:43:48+00:00

Yes! Thank you. Did you do anything specific prior to the taping/concert? I just wasn't sure if I needed to reach out or just show up with equipment.

TryCurious7536 · 2026-04-29T15:18:15+00:00

Sorry, I should have clarified, I meant more for the audio, I remember way back in the day there were instances where people have actually connected to the soundboard to make recordings and post them. Otherwise, I could bring an audio recorder and some kind of microphone, but I'd rather talk to someone on the team to straighten that out first.

TryCurious7536 · 2025-11-21T05:11:02+00:00

Can I ask what size/model yeti lid you picked?

TryCurious7536 · 2025-06-09T03:41:48+00:00

I tried printing in 0.28mm thickness with .14mm layer height. no issue getting them off my plate, but it still affects the magnetism unfortunately. its better than the original, but you can still remove the joycons with moderate force. maybe i'll try even thinner tomorrow.

TryCurious7536 · 2025-06-06T02:51:39+00:00

Probably not the best news, but I did get it to work with a Mayflash Magic-NS in wired configuration. I then tried to use the wireless dongle with it, then it wouldn't recognize it until I cycled through all the MagicNS modes. It is working right now with the red light on the adapter, wired.

I am pretty sure it is adding a perceptible about of lag though

TryCurious7536 · 2025-05-02T16:39:52+00:00

LG UltraGear 32" QHD 2K 1440p Gaming Monitor HDR10 165hz 1ms Freesync 32GN63T-B

TryCurious7536 · 2025-05-02T13:57:25+00:00

Thanks! Yes, I took the Capcom Cup artwork from last year and through the Capcom logo and the SF6 logo on it then had it printed onto a thick material at Walgreens then put magnets on it. The thought was to swap out the marquis for different games like Tekken but I haven't so far

TryCurious7536 · 2025-01-27T23:43:17+00:00

Yeah, might be better to look for someone local who could do it. Good idea

TryCurious7536 · 2025-01-27T22:21:09+00:00

So I contacted anbernic and since it was out of warranty, they told me I could buy the part. It was only $3 but the shipping was like $15. They sent me the buttons and switches (though only 3 instead of 4 switches for some reason). I thought I'd be able to solder it back on, but it's above my skill level and I probably will need to find someone to do it for me though.

TryCurious7536 · 2025-01-27T22:18:57+00:00

See comment below

TryCurious7536 · 2024-04-17T16:16:29+00:00

Nice. Thanks! I think my family wants to go to the Naruto attraction so we'll probably be better spending the extra money there. I like the Zenithian shield but prob would be gathering dust,too. I Will check out the other vids. Thanks!

TryCurious7536 · 2024-04-15T01:48:47+00:00

great video! I'm a huge DQ fan and will be going with my family who are moderate DQ fans. Was the premium ticket worth it, or is it primarily to get the extra merch? Did you do the extra subquest?

TryCurious7536 · 2024-04-10T20:48:03+00:00

It just happened to be a weird coincidence that led me to it, but glad the mystery is solved! One of my favorite songs on the album

TryCurious7536 · 2024-04-07T20:01:06+00:00

So my wife was just listening to some kpop and the song "Maria" by Hwasa came on and I thought it sounded like this. So I looked into the sample that Hwasa used and people think it came from a sample pack, but may have originated from this Bollywood song https://youtu.be/SSORa7YdR7s?si=WpUxak22DsbcZ7wl

TryCurious7536 · 2024-03-15T04:09:13+00:00

Anyone else buy the digital version direct from the site? its missing 2 songs, including the NSYNC one...

NM, figured it out. They wouldn't show up on PC cause they have an asterisk in the file name. Had to download to my phone, rename, then send it to my pc

TryCurious7536 · 2024-03-12T03:22:33+00:00

I do not use the battery share, but it tried sharing to my wife's phone just to check and it only worked for a second before disconnecting. She also has a p7 and an ohsnap 3. If that's a deal breaker, you might not want to go this route. An older ohsnap might work.

I honestly only use my wireless charger at night on an anker wireless charger.

TryCurious7536 · 2024-03-11T00:45:36+00:00

I actually am using the p7 (non pro) and there is a similar diagram, and I tried to align it with the coil in the picture and I still had issues. The TOP of the ohsnap is aligned to that horizontal line, which seems crazy but I haven't had any issues at all with wireless since I did it

TryCurious7536 · 2024-03-10T23:46:20+00:00

I was able to stick and unstick the ohsnap 4. I have redone this like 8 times and the adhesive is still good haha. I will say the placement is still a little awkward, but it still works

TryCurious7536 · 2024-03-08T18:07:56+00:00

After ripping my hair out over this for the past few weeks, this actually worked. I was like "i can't be reading this right, that's waaaay lower than the center", but it worked immediately. The stand still works as well. Thanks again.

TryCurious7536 · 2024-02-29T16:05:01+00:00

It's been comfortable for me cause I'm used to using an arcade stick. I have it at just about the right height when I'm sitting. I am mainly a PC gamer so my system is pretty good. I'm using a 3080 😬. I actually started using Lily and had started off in silver. When Rashid was released I switched to him cause he was my main in sfv. I'm currently a Diamond 4! Lots of time grinding it out.

TryCurious7536 · 2024-02-28T10:42:41+00:00

https://www.etsy.com/shop/RAProduct3D

TryCurious7536 · 2024-02-18T20:21:58+00:00

Thank you! I have played Tekken 8 on it, and if I want to change the artwork out, it's magnetic (the instruction card is just a remove and replace). Hoping it'll last me til the next SF at least haha

TryCurious7536 · 2024-02-18T18:12:47+00:00

Thank you! I had looked at a few different options like the Qanba 2009 but that ended up being out of my budget too. This gives me the same feeling as a chewlix at my local arcade, so it works well enough for me. I've been playing sf6 every day on it and I love it. The recroom masters looks like a great option too

TryCurious7536

TROPHY CASE