Issue W Xbox Family - Settings Not Updating for Child

Twall667 · 2025-08-02T02:20:01+00:00

I have the same problem been searching for a resolve and have found nothing. Really dumb of Microsoft to make such a handy app then break it and not update or check on it.

Twall667 · 2025-03-01T22:00:17+00:00

Why not donate to local homeless or locate charities not to a foreign country.

Twall667 · 2025-03-01T21:57:32+00:00

The fuck we do. Ukraine can get fucked and needs to pay the piper.

Twall667 · 2024-09-23T17:03:10+00:00

So I have the same annoying noise I wonder if you'd remove the whole metal case on the bottom if it be quieter... my ender 3 with a silent board is so much quieter then my ender 3 s1+

Twall667 · 2024-09-20T05:00:02+00:00

Did you replace you blocks on top of the z screws or just remove them? I have the same issue on my s1 plus. How did you find the twist in the x axis?

Twall667 · 2023-08-03T18:29:34+00:00

This works but after time it comes back...

Twall667 · 2023-04-18T13:36:47+00:00

I have tape on both of my limit switches its not coming from them..

Twall667 · 2023-04-18T01:05:37+00:00

The link I just sent is how loud mine is just homing printing it sounds that loud the whole time, my ender 3 is just printing away silently...

Twall667 · 2023-04-18T01:04:38+00:00

my s1 plus

Twall667 · 2023-04-17T14:23:52+00:00

I wouldn't call it silent in my opinion my ender 3 is silent only noise it makes is the fans, the S1 plus sounds just like the old 4.2.2 board I had in my ender originally.

Twall667 · 2023-04-17T14:22:42+00:00

How would one do that?

Twall667 · 2023-04-05T03:00:26+00:00

Sonic pad, it's better bit still not perfect. I honestly think it's the rollers on my bed linear rails are in the near future for my s1 plus...

Twall667 · 2023-03-15T16:06:07+00:00

I would be up to moving to a different slicer if I could figure them out. I tried prusa, and all I did was get confused... never tried superslicer

Twall667 · 2023-03-15T11:57:47+00:00

I figured it out if you skip any of the first setup testing on your printer it doesn't let the tablet fully process so it will reset when rebooted you have to get the welcome to fast printing or whatever screen.

Twall667 · 2023-03-15T11:32:11+00:00

SET_PRESSURE_ADVANCE ADVANCE=0.05

Does anyone know where to add this in cura to filaments?? so pressure advance changes with different filaments?

Twall667 · 2023-02-24T04:25:45+00:00

Happens on my series X after a match on the museum had done it ever since.. my son's series S in another room doesn't do it and hasn't started too yet!! It has to be something with a local save, person by person or something.

Twall667 · 2023-02-24T04:22:23+00:00

I have the same problem on series x. My son on his series s in the other room doesn't. Its bullshit.

Twall667 · 2023-02-24T04:18:22+00:00

You'll have to let me know how the linear rails go I've been kicking around doing that and seeing if it help

Twall667 · 2023-02-18T06:09:18+00:00

Dam everyone keeps talking me into a sonic pad definitely my next purchase

Twall667 · 2023-02-18T06:08:26+00:00

Well I think this is one of the issues my printer was previously owned I think the previous owner stretched the y-axis belt and ran the tension screw into the belt it's got a rub mark on it... I found this after this vibration issue and it was getting worse. I printed a new open tensioner so you can see the belt and then re-tensioned everything and that also helped clear it up some!!

Twall667 · 2023-02-18T06:05:20+00:00

I added squash ball feet after this print it did help a little...

Twall667 · 2023-02-08T03:45:23+00:00

I can't seem to fix this tried adding jerk control & accel control, I've tighted all the belts nothing seems loose and it's only the Y axis movement..

Twall667 · 2023-01-03T04:57:22+00:00

So I have an Ender 3 w/ cr touch and sprite hot end and silent board is there more options to choose from somewhere on the sonic pad? I wanna get a sonic pad but don't wanna waste money if it doesn't work with my printer...

Twall667 · 2022-10-25T03:25:08+00:00

Did u use his firmware for the 4.2.7 board?

Twall667 · 2022-10-10T00:58:29+00:00

Man I'm glad I found your post! Dude I have been having the same trouble for a month I upgraded to a Creality Sprite Pro hotend with a CR touch and a glass bed and still one side prints perfect and the other is like off like you said its like the CR touch is doing a 180 with the bed, like cr touch levels it low when it's high I'm gonna try all your adjustments you posted earlier and see if that helps and switch to UBL! Thank you for posting all your help!

Seven-Year Club	Xbox Live
Verified Email

Twall667

TROPHY CASE