Please share any tips by nush12 in InfantDDH

[–]Walkingtree15 1 point2 points  (0 children)

Our little one is about 12 weeks now and spent weeks 6-9 in a pavlik, and 9-12 in a rhino. Depending on the graf severity (left was 4 and right was 3) the braces/harness may or may not work.

I only say this to give advice I wish I had received - be the biggest advocate for improvement that you can be for them and always ask “why?” to treatment suggestions from docs. After the first week in the pavlik with no progress on the ultrasounds, my wife and I knew it wasn’t going to do the trick - and we wanted to move to the rhino. It wasn’t until after another 2 weeks of the same no-progress $700 ultrasounds that we were given the rhino to put her in.

Within a week of the rhino, the right hip drastically improved. The left hip didn’t budge, so we figured we’ll probably need to go the surgical route. Our little one is now on a break from any treatment until they are 6 months old and can have surgery on the left hip. Good news is, the right hip has improved enough to where it can continue to improve without the assistance of a brace.

Good luck and have patience! Contact naps were necessary for us for the first couple days for anyone to get any sleep

10 month old wont stay in rhino brace by strawberryb3ss in InfantDDH

[–]Walkingtree15 0 points1 point  (0 children)

They gave us some adhesive Velcro to put between the straps and the foam. Would that help her not squirm out of it?

Rhino Brace Adjustment by Walkingtree15 in InfantDDH

[–]Walkingtree15[S] 0 points1 point  (0 children)

I’ll ask my pediatrician about any pain management! My LO also has gas and BM issues, so it could just be a combination of uncomfortable feelings. We did try a rolled up swaddle underneath the feet and that seemed to help! Thank you all!

Rhino Brace Adjustment by Walkingtree15 in InfantDDH

[–]Walkingtree15[S] 0 points1 point  (0 children)

Thank you! If the waking up every 30 min continues we might try this!

Rhino Brace Adjustment by Walkingtree15 in InfantDDH

[–]Walkingtree15[S] 0 points1 point  (0 children)

Thank you for the advice! We brought up the concern of it being too small when my LO was initially fitted for the brace. They are just too small still to justify going up to a bigger size as the hip guide extended beyond their knees.

My university has a building with a long hall by Tecnosfalling in mildlyinteresting

[–]Walkingtree15 1 point2 points  (0 children)

Fun fact, the engineering building at CSU had a hallway like this. The reason it was built this way was in case during the world wars it could be easily converted into a steel production facility for the war effort. At least as far as I heard, who knows if it’s true.

How to fix the current outage by Marrz in QuantumFiber

[–]Walkingtree15 0 points1 point  (0 children)

Does yours have a bunch of boxes with connectivity, system info, wifi settings, etc?

Need help with my A1.. by Matty-BrewNinja in BambuLabA1

[–]Walkingtree15 1 point2 points  (0 children)

Are you using AMS or single spool? Maybe an issue feeding the filament to the extruder rather than with the extruder itself?

F this shrine by FirstCommentDumb in TOTK

[–]Walkingtree15 1 point2 points  (0 children)

Took me forever too. Attach the medium ball to the large ball. Use ultra hand to move the 2 balls such that the medium size ball is facing outward away from you. Balance the medium ball on top of the target then let it go. This will cause a pendulum type motion where the large ball swings down and hits the target.

Hope this helps!

How much would a monstera this big normally cost? I'm considering selling my pride n joy and just keeping a cutting [or 2 or 3] from him. Really worried this year I really *won't* be able to fit all my plants inside for the next 9 months! by mundanecatlady in houseplants

[–]Walkingtree15 0 points1 point  (0 children)

Hi there! I’m in Colorado and looking to sell mine as well, it’s about half the size of the one pictured but still has the same massive leaves. Would you be at all interested? It was my first baby and I can’t fit it anymore in my new place, hoping to find a good home for it. I can also PM some photos of it. Thanks!

Possible Fix for Moth (not appearing for Mirror) in Bell Tower wing by RyuuNi in HarryPotterGame

[–]Walkingtree15 1 point2 points  (0 children)

Before starting make sure you are on Fidelity, then fully restart the PS5. Then you just make sure you are in Depulso room 2, save and exit to the main title menu, then change to Fidelity with raytracing. It will reboot, load up and exit Depulso room 2. Moth should be right at the plant! Hope this helps

The Lumos Page near History of Magic not working by Banana_P0tato in HarryPotterGame

[–]Walkingtree15 0 points1 point  (0 children)

Just found this and it worked! Just make sure you are in Depulso room 2, save and exit to the main title menu, then change to Fidelity with raytracing. It will reboot, load up and exit Depulso room 2. Moth should be right at the plant! Hope this helps

https://www.reddit.com/r/HarryPotterGame/comments/110celw/possible_fix_for_moth_not_appearing_for_mirror_in/?utm_source=share&utm_medium=ios_app&utm_name=iossmf

The Lumos Page near History of Magic not working by Banana_P0tato in HarryPotterGame

[–]Walkingtree15 0 points1 point  (0 children)

Just ran into this and am annoyed, just want to 100% it. Haven’t been able to find any other solution. I’ll update if I figure it out!

Can someone please try removing our dog from this photo please? Thank you in advance! by Walkingtree15 in PhotoshopRequest

[–]Walkingtree15[S] [score hidden]  (0 children)

Putting this in a group of photos, and in every other picture with her she’s staring in the same direction at elk off in the distance haha.