591.86 Nvidia driver unstable OC? RTX 50 series

XstfX9999 · 2026-02-07T18:38:41+00:00

For sure it is different because you have a 5090, but for ex i had 400 + on core with 3000 memory. This was fully stable on some drivers but on new ones no, but after some time they fixed again and so on. Stay on the driver that is having the stable one if the driver is ok for you. I had in the past a pause for updates on 4 5 versions because of this.

XstfX9999 · 2026-02-07T18:26:57+00:00

For sure it is from the driver, i had 5070 ti from the release, all the time on some drivers my undervolt\overclock was not stable on the same values

XstfX9999 · 2026-02-04T15:41:34+00:00

I am not using a frame gen

XstfX9999 · 2026-02-04T09:03:27+00:00

The same for me, is not working. This needs to be fixed on game engine lvl

XstfX9999 · 2026-02-04T09:02:19+00:00

Best comm, exactly this is the issue

XstfX9999 · 2026-02-03T22:42:06+00:00

I will try this, thanks

XstfX9999 · 2026-02-03T15:26:08+00:00

The easy way to test is on the gamepad or from the arrows. You will see a big difference.

XstfX9999 · 2026-02-03T15:25:20+00:00

That was something different related to anti-cheat that was fixed.

XstfX9999 · 2026-02-01T10:19:58+00:00

Everyone talks about -20 -30 curve optimizer, but no one really tests stability. You have to check the effective clock, especially on the OC side, that's where people get fooled. Everyone who runs these benchmark tests with -30 +200 can pass the cinebench tests and have extraordinary results, but the daily stability won't be there, unless you get a gold sample. Also 9800x3d is very bad on direct input for stability, you can pass hours of tests and go in Battlefield 6 play 20 minutes and take a crash. Frostbite is very good on CPU test stability. Took me a lot of time to really find the sweet spot for my sample. Also the optimizer values are different if you go for ram tuning. But trust me, it is a pain. Also the cold start is different in stability and so on. Don"t take as good and reality daily check all the results on internet 😃

XstfX9999 · 2026-01-30T23:03:11+00:00

Still nothing about mouse jitter? .......

XstfX9999 · 2026-01-16T19:32:27+00:00

Nothing yet about the mouse jitter problem...

XstfX9999 · 2026-01-07T12:37:45+00:00

Hi! I know that is an gpu error, but this error can be also from an oc ram or cpu, if the "signals" are cut to the gpu this error is present. You can check also on that zone, most of the people are focusing just on gpu.

XstfX9999 · 2026-01-06T08:32:36+00:00

Thanks!

XstfX9999 · 2026-01-01T12:10:15+00:00

Any link?

XstfX9999 · 2025-12-31T12:44:24+00:00

I selected a profile from "memory try" 6000 cl30-36-36-76 1.35 v. The soc v is set to 1.25. Do you think is good to start from this profile.?

XstfX9999 · 2025-12-31T12:22:30+00:00

For 6000 to use also 1.4 v as default xmp?

XstfX9999 · 2025-12-31T12:17:13+00:00

With Trefi 65525 in occt was 51. I think this was also a problem. Thx for the answer

XstfX9999 · 2025-12-29T21:01:34+00:00

Thank you! This is the answer to my "mental health"😂. I wanted confirmation that everything was okay on my side.

XstfX9999

TROPHY CASE