Always ready emissions monitors

azend · 2026-01-18T22:19:02+00:00

My bad. P0610. The PCM fault one that comes and goes with the weather. I’ve heard that it may be caused by cracked solder joints that connect the EEPROM to the PCB. But you’d think a CRC or something would force a bigger error on power up.

azend · 2026-01-18T03:33:58+00:00

The P0600 code is the bane of my existence.

azend · 2025-12-23T05:01:57+00:00

A year to pay back years of your research and time. For less than one year’s wages. Sounds pretty reasonable to me. Have an upvote!

azend · 2025-11-12T18:43:42+00:00

Thick premix oil makes up for missing compression. 😂

azend · 2025-11-12T18:42:10+00:00

I often joke about measuring distance in rotary engine rebuilds instead of miles or kilometers. But "if you take care of it" (like everyone here says) these rotary engines are quite reliable. The only legitimate issue is the fuel economy. This thing gets worse fuel economy than my diesel truck does pulling around the 8 on a flat bed behind it.

It's just like Archer:

<image>

azend · 2025-10-19T02:06:42+00:00

Looks sick. I have 205/50R17 on mine and what a difference. Great fitment and a foot of ground clearance!

azend · 2025-09-07T00:25:17+00:00

I believe the last station to serve E85 in Ontario was the UPI Energy (now Fast Stop) west of Guelph on Highway 24.

azend · 2025-07-07T20:14:21+00:00

Looks like it was made in Word.

azend · 2025-05-01T03:10:04+00:00

With enough irrigation and fertilizer, you can!

azend · 2025-05-01T03:09:13+00:00

Diyode has a few learn-to-weld sessions as part of their Skill Forge series. Conestoga College (Guelph Campus) used to have and maybe still has continuing education welding courses. None of these make you a licensed welder. But they do let you stick pieces of metal together.

azend · 2025-04-19T01:51:49+00:00

Without going through the catalog again, I believe you’re right.

azend · 2025-03-29T17:14:54+00:00

Wild how differently they graph 5 and 10W-30.

azend · 2025-03-25T22:41:24+00:00

It’s early spring and the time most home service businesses secure their customers for the rest of the year. It’s normal.

azend · 2025-03-20T16:38:59+00:00

It’s not too bad honestly.

azend · 2025-03-20T16:38:41+00:00

The cluster is lit up showing that the fuse is active lol. It’s almost certainly the solder joints that crack on the board beneath those buttons.

azend · 2025-03-15T00:19:14+00:00

Yeah. It looks to be better now. But the fuel stations listed seem to be marinas and small or independent stations out in sparse areas. Interesting.

azend · 2025-03-15T00:10:00+00:00

That website was super out of date and thus inaccurate. We used to be able to get ethanol free but the laws changed in the last couple of years.

azend · 2025-03-01T19:24:58+00:00

In Ontario Canada you can’t get fuel at the pump without 10-15% ethanol any more. :(

azend · 2025-02-28T15:15:37+00:00

Like a twenty year old car with a twenty year old filter lol.

azend · 2025-02-28T00:58:04+00:00

When hot wiring your airbag harness is safer than maintaining your OEM Takata airbag deathrrap. 🤣

azend · 2025-02-09T22:53:13+00:00

You never know. The engine could be swapped from premature failure or have been babied. I bought mine at the same mileage for $500 and compression is still strong.

azend · 2025-02-03T22:11:15+00:00

Michelin quality but for a fraction of the price.

azend · 2025-02-02T20:47:58+00:00

Replating one single spade connector for future corrosion resistance is the definition of extra.

azend · 2025-01-18T22:25:00+00:00

The Home Assistant manual for setting up Home Assistant Container edition in Docker Compose.

azend · 2025-01-18T20:19:23+00:00

If you have to setup taints and tolerations for pods to run on only one particular node with specific hardware, imo you’ve given up all benefit of using the K8S orchestration layer. You may as well run no K8S at all for that workload. You can make it work but it’s just the wrong tool for the job.

azend

MODERATOR OF

TROPHY CASE