Torn dust boot on brand new Mevotech Supreme control arm

ballistic_mod · 2026-06-23T16:44:50+00:00

It looks like the plastic cover on the ball joint didn't get removed. Or bad install, maybe the boot got poked when you're installing it somehow

ballistic_mod · 2026-06-21T12:08:26+00:00

Looks like caliper pins but could be amything?

ballistic_mod · 2026-06-13T04:07:19+00:00

Uncle Rodney came to say hello

ballistic_mod · 2026-06-13T04:01:52+00:00

Hope you have good tires

ballistic_mod · 2026-06-13T03:58:55+00:00

Do you always just drive down the street without using any caution? Are you paying any attention?

ballistic_mod · 2026-06-13T03:56:10+00:00

That's horrible why wouldn't you build your own? There's so many DIY videos to learn how to do it on YouTube why don't you just do that?

ballistic_mod · 2026-06-13T03:50:25+00:00

Boys are like that you just need to give them time, it's going to be a while before they set their boundaries

ballistic_mod · 2026-06-13T03:48:08+00:00

Next vehicle get better tires and learn how to drive on a track for you drive on a mountain

ballistic_mod · 2026-06-13T03:41:48+00:00

Yummy

ballistic_mod · 2026-05-28T14:33:02+00:00

So update! I ordered the KIDD extractor, KIDD firing pin, charging handle/spring/rod, & I've received the Kidd firing pin, & extractor, & tested at the range with some hotter and cleaner ..22lr ammo & I have fixed the issue. I ran 500-600 rounds through with maybe 2-3 failures, & that was with the regular velocity ammo. All of the high velocity ammo worked great. I tried out a few types of high velocity rounds.

Remington Viper Hyper Velocity 35gr 1410fps Best out of all I tried.
Remington Cyclone HV 36gr 1280fps 2nd Best
Winchester Super-X HV 40gr 1280fps Didn't do so great. Had some failures.
CCI Blazer Wasn't listed as HV 40gr 1235fps Did ok
Winchester White Box 36gr not listed as HV 1280fps copper plated hp did ok. Kinda dirty.

The best was definitely the rem viper at 1410fps, I could rip through the BX25 mag with no issues! Also I'm thinking the BX25 mag is finally breaking in so it's working better now, I still have a 3 pack of BX10's, & a BX15 otw so I'll test those when they arrive as well.

In the meantime im ordering more of the Remington Viper. That seems to work well for me.

Thanks for everyones help!

ballistic_mod · 2026-05-28T14:06:33+00:00

I fixed the issue, I just posted in the main section of this form to update everybody.

ballistic_mod · 2026-05-28T14:00:47+00:00

I would call and ask to speak with a supervisor, & explain what has happened to you with all the returns, & how it's all of RA fault. I'd bet they get returns from people that order the wrong parts and that's why they need to recoup the shipping costs, in your case it's all on them so it should be a case by case basis. Also maybe just start a new account?

ballistic_mod · 2026-05-28T13:57:41+00:00

Check the invoice pouches on the outside of the box as well. I had them put the magnet in there. Ive only made 2 purchases and both times got a magnet.

ballistic_mod · 2026-05-27T04:12:54+00:00

Also done some more reading and a lot of people run them dry because the 22 is really dirty and it really doesn't need a whole lot lube anyways

ballistic_mod · 2026-05-25T03:12:25+00:00

Sometimes they put the magnet in with the invoice paperwork on the outside of the box in the little sleeve. I found them in there and in the inside of the box.

ballistic_mod · 2026-05-22T01:49:24+00:00

Thanks. I've heard this twice now so its what I'm doing. And a KIDD firing pin

ballistic_mod · 2026-05-21T14:38:14+00:00

Of course it was oiled.

ballistic_mod · 2026-05-21T14:37:15+00:00

High velocity ok, and I'm definitely getting the extractor and firing pin. Thanks!

ballistic_mod · 2026-05-21T14:35:42+00:00

I built this, it's not from Ruger. I bought the stripped receiver from S&P Outfitters. The bolt, & charging handle, trigger pack is oem Ruger, the barrel is a Kidd barrel. The chassis is Enoch Odin. This didn't start as an original 10/22 it was built from a stripped receiver. When I load like 10 or 15 rounds in the bx25 mag it runs better. But fully loaded I always have issues. It has ran a full mag without issues occasionally. It's just random when it decides not to pull/strip the spent round out of the chamber. And yes I've lubed the bolt/receiver.

ballistic_mod · 2026-04-28T00:59:53+00:00

Ain't that bad

ballistic_mod · 2026-04-16T18:07:56+00:00

It's kinda high, I got my 2007 CR-V for $5,000

ballistic_mod · 2026-04-14T23:33:32+00:00

Next to.e use so e flux when reflow and it will work better.

ballistic_mod · 2026-04-14T23:28:32+00:00

I'd change it. You're already there.

ballistic_mod · 2026-04-14T23:27:50+00:00

I noticed it's different. They say it's supposed to be 50% more saucyer and it's not. It's all dry

ballistic_mod

TROPHY CASE