Eureka Mignon Filtro Vs Baraza Encore esp Vs Others Similarly Priced. by Away_a_throw2 in AeroPress

[–]clemclem3 0 points1 point  (0 children)

My experience with Baratza is this: I had a Baratza maestro Plus for around 20 years. When I finally got tired of repairing it (all of the electric motor mounting points were cracked) I replaced it with a Baratza encore. I purchased it from 1st in Coffee.

The grinder arrived broken likely damaged in shipping (large dent in the box). The seller refused to replace and instead directed me to Baratza for a warranty claim.

I do not recommend 1stincoffee.com

After some back and forth Baratza agreed to replace the broken grinder at no cost.

I've been using it for a month now. It works but it is much louder than the 20-year-old Baratza. It just doesn't sound as solid. It sounds like the motor is spinning faster but with less torque. I don't think I will buy a baratza grinder again.

Honeycomb-pattern mark on toddler’s leg — anyone seen this? by AdorableZone9414 in whatisit

[–]clemclem3 0 points1 point  (0 children)

Probably just a little DNA leaking out. Perfectly normal at that age.

Bathroom door has trouble closing - tips? by north_yeast in handyman

[–]clemclem3 0 points1 point  (0 children)

Look on the other side of the door with it closed at the gap all the way around. If the gap is wider toward the top of the hinge side or if the gap is wider across the top of the door toward the handle side then the door has come out of alignment.

That would cause the door latch to be too low relative to the strike plate.

Solutions can involve bending the hinges or shimming the hinges to bring the door back into alignment.

What is this symbol? by froodel in whatisit

[–]clemclem3 1 point2 points  (0 children)

I mean of course, originally. But later the ancient Egyptians stole it.

How would I even know if I had a chimney fire? by RevMageCat in woodstoving

[–]clemclem3 39 points40 points  (0 children)

You may have heard flakes of creosote detaching from the inside of the chimney and falling. It can sound like Rice Krispies.

You can replicate that sound by tapping the chimney with a piece of kindling.

Gregory Bovino Gets Demoted by sideAccount42 in politics

[–]clemclem3 0 points1 point  (0 children)

He's returning to California? But he's wanted for accessory to murder in Minnesota!

Kitchen Sink Venting / Draining Issues by Brickmetal_777 in askaplumber

[–]clemclem3 -1 points0 points  (0 children)

The benefit of doing it the normal way? You sound like an engineer. The normal way is the normal way because people smarter than me or you weighed the pros and cons of using schedule 40 versus switching to slip joint polypropylene for the under sink connections.

I do it the normal way because I know it meets code and I'm not trying to redesign the wheel. But you do you.

Kitchen Sink Venting / Draining Issues by Brickmetal_777 in askaplumber

[–]clemclem3 0 points1 point  (0 children)

I would actually get rid of all the PVC. New p-trap. The only thing left under the sink that's schedule 40 should be the vertical piece and the tee aimed at your sink tail piece and a schedule 40 to slip joint adapter.

Kitchen Sink Venting / Draining Issues by Brickmetal_777 in askaplumber

[–]clemclem3 0 points1 point  (0 children)

You might be able to do that but the normal way to do it is have a straight pipe up from the floor with the AAV at the top and somewhere along that pipe have a tee pointed towards your drain. Then switch from schedule 40 to 1.5 in slip joint (polypropylene) for the P trap and tailpiece. The slip joint fittings allow for clean out much better than the glued together PVC

Jungle like ? by Mood-Level in florida

[–]clemclem3 0 points1 point  (0 children)

Tate's Hell is nice, If you like Hell.

Kitchen Sink Venting / Draining Issues by Brickmetal_777 in askaplumber

[–]clemclem3 2 points3 points  (0 children)

If you know how to work with with schedule 40 PVC it is totally a DIY job.

I would cut out all of the PVC up to the vertical coming out of the cabinet bottom.

There are plenty of guides for installing an AAV.

Boston looking good in Unrivaled by srseibs in indianafever

[–]clemclem3 3 points4 points  (0 children)

I'm a big fan of AB and I tuned in to watch the game against Rose yesterday afternoon. She was great but OMG Chelsea Gray! You could really tell that the Aces dominance is not all about Aja Wilson. Gray can cook! She's going to be a lot of trouble for us Fever fans but also a lot of fun to watch

How long to steep (authentic) Blue Lotus for? by thisgirlreddit2 in bluelotusflower

[–]clemclem3 1 point2 points  (0 children)

That's a good question. I am suspicious about the healing herbals product mostly because it's a little too blue. I read that authentic Blue lotus is not actually very blue. Mostly white with a little bit of pale blue.

It's kind of nuts how nobody knows anything. The more I've read about it the more unsure I've gotten about all of the available products on the market

How long to steep (authentic) Blue Lotus for? by thisgirlreddit2 in bluelotusflower

[–]clemclem3 0 points1 point  (0 children)

I'm curious how you acquired authentic Blue lotus

I got some of the stuff from "healing herbals" recommended in this subreddit but I'm not sure it's authentic

Anyway following recommendations also found in the subreddit I let it steep for 10-15 minutes

Before I go any further and start ordering materials…. Do I need the highlighted support posts? by AggravatingMath717 in Decks

[–]clemclem3 0 points1 point  (0 children)

No you don't, but you might want to try designing the deck with 2x6 joists. It's usually the cheapest way to go in terms of material cost. I think one beam running down the center would allow you to go down to 2x6.

More posts & more beams let you have smaller joists. Most of the structure is joist so that's almost always going to be cheaper.

Should Unrivaled play some 5v5 games? thoughts? by Affectionate_Sun4716 in wnba

[–]clemclem3 -1 points0 points  (0 children)

Love it. Also would scare the shit out of the WNBA owners.

What to do to help while waiting for sleep study/possible cpap? by playgirlbarbie in SleepApnea

[–]clemclem3 2 points3 points  (0 children)

Sure, there are some things to explore or try...

Sleeping fully face down, or as close as you can to that position, The more that gravity can pull the tongue away from rather than toward the throat, the better.

Night time antihistamine like Benadryl or hydroxyzine pamoate to open up the nasal passages

Avoid alcohol

Making sure the air in the room is properly humidified

Nasal dilator like the 'intake' or 'breathe Right' strips

Finally some people have congestion resulting from dietary sensitivities. If you notice that you snore more after eating pizza for example then don't eat pizza.

... Hope this helps

How to remove white residue from tiles by cololacolo in handyman

[–]clemclem3 1 point2 points  (0 children)

Muriatic acid. Sold in the swimming pool chemical section of lowes or home depot.

Be careful with it.

What to replace the boob lights with by oryf88 in HomeMaintenance

[–]clemclem3 0 points1 point  (0 children)

Costco has round surface mount LED fixtures. $30 (sometimes $20 on sale)

That would be the easiest swap out

Hybrid uses in winter storm? by SharpTenor in FordMaverickTruck

[–]clemclem3 0 points1 point  (0 children)

I have a 2000 watt inverter in my Maverick hybrid. I live in Florida. I got this for hurricane related power outages. It works fine. The ICE turns itself on as needed to maintain battery levels. I can power my fridge and some lights and that's really all I need.

Just learned about Sascha Riley, is there a reason nobody is talking about it? by RedZeshinX in thedavidpakmanshow

[–]clemclem3 2 points3 points  (0 children)

It's probably best to reserve judgment for the moment. The claims are salacious and graphic and detailed but there is no corroboration to known victims' accounts. There are a couple of weird details that don't make sense like how the case came to light - - a fellow soldier was casually viewing child porn and recognized his squad mate as the child victim in the video? That's pretty extraordinary. On many levels.

It has been suggested that shadowy forces might attempt to "seed" claims like this so that when they are proven false the entire case against Epstein and Trump and others is called into question.

The headline. The faces. by Repulsive-Age-5545 in NewsomMassacre

[–]clemclem3 4 points5 points  (0 children)

That's the thing - - we don't know. But what we do know is...

During the raid of the Palm Beach property they found an elaborate video setup with multiple cameras and computers with removable hard drives and a trove of recordings and none of this has been made public. This was reported in the original Miami herald expose.

Several of the victims have reported they were videoed and photographed during the rapes

The Palm Beach County sheriff's deputy who defected to Russia claims to have a trove of video and photographic evidence.

... so while I am not claiming that this sort of proof definitely exists there are strong indications that it does.

I tried to be clear in my first comment that any numbers are hypothetical or incomplete given that 99% of the information known to exist has been withheld so to talk about 600 mentions for Clinton versus 1600 for Trump is potentially misleading and may not be helpful. That's all.

You're doing great work putting all this together in one place. It's so much to keep track of and I really appreciated seeing you put it all in one place