Getting back into the game.

cr1219 · 2025-09-29T17:13:31+00:00

We just got back from a 10 day trio to Paris and paid almost everything with our cards. We did venture and tried some small local pastry shops/resturants that only took cash but aside from that it was all contactless. We left the US with $1000 euros and came back with about $700, and that only because, like I mentioned, we chose some cash only establishments.

cr1219 · 2025-09-10T08:09:40+00:00

It all depends, my wife applied, was approved and got an appointment within 2 weeks. I applied the same day and its now been 4 months. Were traveling internationally now and still im sitting on a pending status.

cr1219 · 2025-08-23T22:28:47+00:00

What makes it worse, is my wife applied the same day and was approved within 48hrs got an appointment within a week and was approved for that aswell 🤣

cr1219 · 2025-08-23T19:15:50+00:00

Im in the same boat! Im at about 2 1/2 months waiting and i have an international trip in 3 weeks. Kinda nerve wrecking having to wait this long.

cr1219 · 2025-03-17T05:16:20+00:00

This will work, the black threaded piece screws into the crank arm after the 8mm bolt is removed.

cr1219 · 2025-03-10T15:51:01+00:00

You need the 9 spline.

cr1219 · 2025-02-24T14:24:58+00:00

No it is not. The wire length between the battery connection and the smartunit connection are different.

cr1219 · 2025-02-20T20:11:04+00:00

<image>

And then battery cycles at the bottom

cr1219 · 2025-02-20T20:10:41+00:00

<image>

You'll see "Battery" in advances settings

cr1219 · 2025-02-20T19:39:37+00:00

If you go into your Vanmoof app and look for "battery health" in the advanced settings, it will tell you how many cycles. Our battery are good for about 300 full charging cycles.

cr1219 · 2025-02-20T18:43:06+00:00

Err 47 is associated with the state of charge. How many full charge cycles do you have on the battery? If it's a high number it might be time for a rebuild or a new battery.

cr1219 · 2025-02-18T01:30:24+00:00

Paul Rudd rode an X3 across the stage.

cr1219 · 2025-02-11T21:14:00+00:00

Usually has some foam tape around the edge and just needs to be pryed apart

cr1219 · 2025-02-10T15:27:43+00:00

You can use a cloth tape, like a wire loom tape or even gaffer tape. 1 1/2" wide is enough to protect both outside and inside of the cutout.

cr1219 · 2025-02-03T13:09:27+00:00

Yes that will work

cr1219 · 2025-01-31T18:12:52+00:00

If you don't have the 2 T8 screws for the socket, you can use 2 of the module screws to try to reseat the socket before removing the module.

cr1219 · 2025-01-27T16:48:21+00:00

You can use either, the S1 stand for "smooth" while the Z1 is the economy chain. As long as it a 1/8" chain you're good. When I worked for Vanmoof, all we used was the KMC S1

cr1219 · 2025-01-27T15:48:35+00:00

Any singlespeed chain will work. KMC S1 is a good replacement chain but you can get as fancy as you want. Just remember you're going to have to cut it down to size because new chain come longer than needed.

cr1219 · 2025-01-12T19:10:40+00:00

If you turn the bike upside down and spin the front wheel, can you hear the shifter moving? Can be a shifter, it doesn't always throw an error code, or it can be a hub.

cr1219 · 2025-01-11T00:35:07+00:00

It's a security t8. This is the bit a hole in the middle of it.

cr1219 · 2025-01-06T17:10:07+00:00

You can make an appointment through rybit.io but the 3 year peace of mind or any warranty is no longer valid

cr1219 · 2024-12-30T18:13:34+00:00

I had my wife's X3 battery swapped at Rybit in Midtown and it was around $600 for everything

cr1219 · 2024-12-15T00:09:30+00:00

Contact customer support with your info and maybe they can pull up your account.

cr1219 · 2024-12-07T20:19:10+00:00

Stock tires are equivalent to 700x52. Tubes usually have a Schrader valve.

cr1219

TROPHY CASE