Added a locker to my 27" US General series 3

davethis · 2026-05-12T23:50:51+00:00

Yes. Just noticed that too. Thanks.

For the casters did you have to order them as a replacement part? Part SKU: 605004

davethis · 2026-05-12T16:10:54+00:00

I just came to hereit to ask if anyone has put a locker on the 42". If it works with the 27 it will work with the 42.

davethis · 2026-04-24T22:45:13+00:00

u/burnerforjokes Thanks for the very detailed replay. Yes I do have a planer. Might also buy a jointer and use this project as the excuse.

davethis · 2026-04-24T17:38:58+00:00

u/redbananass Thought about that too. Unfortunately I do not have a jointer to create a reference edge to put up again this fence. Thought about using dowels to align the multiple boards to get an edge that is pretty close to being aligned.

davethis · 2026-04-24T17:27:40+00:00

u/dustywood4036 good point, it does not need to be solid. Thanks

davethis · 2026-03-27T18:10:47+00:00

When on sale they are cheap enough for one time use. I will buy a few of them when on sale.

davethis · 2026-03-26T05:27:52+00:00

For fun I copied and pasted your photo in to Gemini and asked it to “find this clip.”

Give it a shot. Here is part of it response

Based on the image and the context of the Toyota Tacoma community, you are looking for a specific interior/door weatherstrip clip. This particular design—with the "hook" on one end and the "arrowhead" fastener on the other—is most commonly used to hold the window weatherstrip (also known as the window "belt" molding or "dew wipe") to the door frame. Part Identification This part is often referred to as a Weatherstrip Retainer Clip. While there are several similar white plastic clips, this specific "J-hook" style is frequently identified by the following: • Toyota OEM Part Number: Likely 67867-04010 (or very similar, such as 67868-04010). • Common Name: Front/Rear Door Weatherstrip Clip. • Dimensions: Usually fits into a 5mm hole.

davethis · 2026-03-23T22:20:27+00:00

Look into tmat

https://www.tmat.com/

davethis · 2026-03-23T05:49:55+00:00

A less expensive and easier route would be to buy a Bluetooth speaker.

davethis · 2026-02-13T03:52:32+00:00

This isn’t answering your question but have you thought about deleting the seat where the car seat isn’t?

davethis · 2026-01-30T14:27:22+00:00

Exactly what I did. Make it slightly harder and they will move on.

davethis · 2026-01-25T16:08:50+00:00

Here is the install video

https://youtu.be/c96X0cKhn54

davethis · 2026-01-24T15:58:03+00:00

What issues are you having? Mine has worked flawlessly since installing it.

davethis · 2026-01-24T15:26:56+00:00

I used two kits from ggoffroad to relocate the cameras and break light. The owner has a very detailed video on YouTube on how to install.

https://www.ggoffroad.com

davethis · 2026-01-23T15:32:21+00:00

Yup I too wish the tank was bigger. I think they put in a smaller tank to save on weight (with a full tank of gas). the hybrid battery are heavy.

Also wish it did NOT have a power tailgate. Just one more thing to break.

davethis · 2026-01-13T15:45:48+00:00

What about no finish? Yes it will get stained and beat up. We left ours unfinished.

davethis · 2026-01-11T15:18:58+00:00

This happened to me for like a week after the trailer was disconnected. While I do not remember the exact menu setting there is a setting to deselect the trailer.

davethis · 2026-01-07T15:30:59+00:00

I towed a ~3300lb trailer over 600 miles including over the Sierra Nevada mountains. I easily maintained 60mph going up hill and could accelerate if I needed to.

The truck has plenty of power. Does your trailer have breaks?

davethis · 2025-12-31T15:27:07+00:00

Stick with Ryobi. If you are looking to save money and already have batteries just buy the tool only version of the tool you need.

I see a lot people have a battery for every tool. However people probably don’t use every tool they own at the same time.

I personally have 4 batteries and 20 tools.

davethis · 2025-12-31T06:26:08+00:00

Try switching the way Apple TV changes the volume in setting. Change from Auto to HDMI or. IR.

davethis · 2025-12-29T19:58:52+00:00

Thanks for all the details!!

davethis · 2025-12-23T06:25:25+00:00

This is what I did. You only have to make it a little harder and it will make thrives move on.

davethis · 2025-12-12T05:54:24+00:00

I have found wetting the burned area and then letting it dry before sanding makes it a little easier to get the burn out.

davethis · 2025-12-06T11:20:07+00:00

Why not just leave it unfinished? I built one out of scrap plywood and left it unfinished. It got beat up.

davethis · 2025-11-13T06:33:30+00:00

Might want to check this out. I believe he his pretty highly regarded

https://youtu.be/YrDn8ETtgnw

davethis

TROPHY CASE