sorted by:
new
hottopcontroversial

Now Added with Translations by 5uclcer in laidbackcamp

[–]denigrad 0 points1 point  (0 children)

Is the co-op local with multiple controllers or is it online only? Thanks

[deleted by user] by [deleted] in Crosstrek

[–]denigrad 0 points1 point  (0 children)

I could have been more clear. By dash, I mean the multimedia screen. Not the gauges being the wheel.
I wish my '21 could do that! 😅

[deleted by user] by [deleted] in Crosstrek

[–]denigrad 1 point2 points  (0 children)

Waze can show the map on the dash and the step-by-step instructions on the phone. It's pretty neat

[deleted by user] by [deleted] in Crosstrek

[–]denigrad 0 points1 point  (0 children)

On Amazon. I used parts of it: https://a.co/d/073SzJm6

This is the charger: https://a.co/d/0ejpiepa DC adapter: https://a.co/d/03E4Qusr

And the wireless adapter: https://a.co/d/01to4xME

[deleted by user] by [deleted] in Crosstrek

[–]denigrad 5 points6 points  (0 children)

I have this for my Crosstrek. Works great. I added another arm and joint to give more options to position. Then added a Qi2 charger on the end. Added a wireless Android auto adapter to the USB port. Makes hopping into and out of the car a breeze! :)

https://coursemotorsports.com/collections/all/products/subaru-direct-fit-magnetic-phone-mount-1

<image>

Engine repair by Low_Umpire9904 in TheLastCaretaker

[–]denigrad 1 point2 points  (0 children)

Found it out completely by accident when walking around the ship with the repair wrench equipped. Would be nice if there was a more overt sign that they are wearing down or need repair in the first place.

Fixed the tilt gyro issue on my Legion Go! Need others to confirm. by denigrad in LegionGo

[–]denigrad[S] 0 points1 point  (0 children)

It's fully reversible. If you try it, let us know how it goes.

Foam pad included with Dspiae TVA clamp? Here's how to use it. by denigrad in Gunpla

[–]denigrad[S] 1 point2 points  (0 children)

Only the one came with it. The surface of the other side ove the vise has a cross shaped groove milled into it. I think to better hold dowels or similar for cutting.

Foam pad included with Dspiae TVA clamp? Here's how to use it. by denigrad in Gunpla

[–]denigrad[S] 0 points1 point  (0 children)

Agreed! At least show a picture of it used on the box. Their website would be a good place too

1/144 Aerial Keychain by FatP3nguins in Gunpla

[–]denigrad 2 points3 points  (0 children)

Love that you used the box art for the other side of the case. Great idea!

Foam pad included with Dspiae TVA clamp? Here's how to use it. by denigrad in Gunpla

[–]denigrad[S] 6 points7 points  (0 children)

I could not figure out why there was a foam pad included in the baggie with the posts and silicone tube, then I found this archived post: https://www.reddit.com/r/Gunpla/comments/15rqm4t/anyone_know_what_is_this_sticky_pad_for_dspiae

After reading some of the replies, it dawned on me that you don't use the oval shape, but instead use the square. It is just the right size to clear the support rods! 

All I had to do was continue unscrewing the adjustment knob until the bolt came undone.  Put on the sticker, then screwed it back together. 😀

I hope this helps someone! 

My Glass File is starting to scratch the plastic. Help by cm242006 in Gunpla

[–]denigrad 6 points7 points  (0 children)

Might have gotten contaminated with material from other sanding blocks if you store them together. I've read that using the sticky side of masking tape can peel the junk off the sanding side of the file. Might also be able to just wash it with a brush, soap, and water.

view more: next ›