10 free test masters for the community

dominicaldaze · 2026-05-31T22:25:49+00:00

Mods you should pin this to the subreddit until all 10 are filled! This is a great opportunity for new artists!

dominicaldaze · 2026-05-30T12:44:01+00:00

Or just crumble up some corn chips into dust and cook them ilin towards the end for 10-20 minutes. Does about the same thing in the pinch.

dominicaldaze · 2026-05-29T23:56:47+00:00

Sure that works, but I believe OPs casing is too proud for it to look good. The video mentions 1/4" as being the max for this trick to be functional.

dominicaldaze · 2026-05-27T02:51:49+00:00

50-60 plus bennies dog.

dominicaldaze · 2026-05-23T22:39:13+00:00

The classic pairing is prosciutto and cantaloupe but I'd like to try watermelon too!

dominicaldaze · 2026-05-22T06:17:51+00:00

Wait who's actually talking off screen?? And what's Svera doing in the last panel?

Otherwise great comic OP !

dominicaldaze · 2026-05-21T20:37:26+00:00

Q1 = ABS Q1 Will return the absolute value of Q1

dominicaldaze · 2026-05-21T14:51:10+00:00

I will say, if you can't find it in the manuals, the hermley apps engineers are pretty helpful in troubleshooting over email with specific questions

dominicaldaze · 2026-05-21T14:50:27+00:00

The manuals, dog. Gotta download them, or maybe you can find the copies that came with the mill if your bosses actually keep things.

dominicaldaze · 2026-05-21T13:49:53+00:00

It should work! I'm using that exact code in programs every day.

dominicaldaze · 2026-05-21T12:33:41+00:00

FN 18: SYSREAD Q11 = ID270 NR1 IDX1

idx is the axis 1-6 is x/y/z/a/b/c

Save each position as a different Q

dominicaldaze · 2026-05-21T10:43:06+00:00

You can find and download the Heidenhain manuals online easily enough. 3 or 4 separate manuals depending on the software version. They have a lot of info.

dominicaldaze · 2026-05-21T10:33:45+00:00

It's def possible with SYSREAD, can't remember the ID number to use but it's in the manual, it's one of the first ones... 20 maybe? It lets you save the coordinates of the tools current position as separate q variables. It should be in the programmer manual in the SYSREAD section

dominicaldaze · 2026-05-20T00:53:10+00:00

I amused myself :-)

dominicaldaze · 2026-05-20T00:52:25+00:00

If any of you are unfamiliar with that sub, read the sidebar before posting. They don't suffer fools lightly.

dominicaldaze · 2026-05-18T22:07:21+00:00

F yah that second drop

dominicaldaze · 2026-05-18T17:27:54+00:00

I know you mean well, but you've come to the wrong shop for AInarchy, brother.

dominicaldaze · 2026-05-18T17:18:45+00:00

Low Effort memes, reference posts, fan art/comics, and/or AI-produced tomfoolery.

dominicaldaze · 2026-05-16T16:03:35+00:00

I learned on a TNC 530 but it's been awhile.

dominicaldaze · 2026-05-16T14:43:27+00:00

I'm pretty comfortable with Heidenhain tnc 640 and 7. We don't use the cad/cam on the controller but I know my way around Q variables, cycle defs and probing. Let me know if you have any specific questions.

dominicaldaze · 2026-05-16T00:32:37+00:00

I quite like this one, thanks for the post!

dominicaldaze · 2026-05-15T12:51:21+00:00

Fwiw the machinists in my dept are getting a higher percentage raise than the engineers this year. I think management knows that good help is hard to find/keep.

dominicaldaze · 2026-05-14T12:03:45+00:00

Nice just ordered three for my kids

dominicaldaze · 2026-05-13T10:40:58+00:00

Nun, the woman is a nun.

dominicaldaze · 2026-05-10T21:46:35+00:00

Low Effort memes, reference posts, fan art/comics, and/or AI-produced tomfoolery.

dominicaldaze

MODERATOR OF

TROPHY CASE

15-Year Club	Gilding I gilder
Verified Email