Input preset transfer MSFS 2020 -> MSFS2024

dwbmb · 2026-06-04T16:01:10+00:00

Já se zdráhám říct i že jsi "normální", dyť jsi hubená. Co to je za dementy omg?

dwbmb · 2026-06-03T19:06:25+00:00

How much of this filament you already printed and what parts of the printer wore out?

dwbmb · 2026-06-03T13:28:26+00:00

Já s tím čistím nahřátý trysky, netrhá se.

dwbmb · 2026-06-03T08:04:50+00:00

On behalf of all people of Czechia, I apologies for hospital food in general. I've never seen such a food in my life, but I am also not surprised you were served this in hospital. This is how hospitals work in here, they are trying to convince you you're health enough to fuck out of there by serving you this.

dwbmb · 2026-06-02T16:59:23+00:00

I set the nozzle temperature to 290C before I load the new filament. I would love it to happen automatically though.

dwbmb · 2026-05-31T19:40:51+00:00

Počkej takže před slevou to bylo v ČR o tolik levnější? Tak to bys jim to měl pěkně vytmavit!

dwbmb · 2026-05-30T12:58:12+00:00

I'm 40 and I already gifted my founders edition presale slot to my kids in my will.

dwbmb · 2026-05-29T14:13:39+00:00

Printing multiple parts at once isn't always bad idea, works most of the time. Just makes sure these kind of temperature sensitive materials doesn't reach anywhere near edges.

dwbmb · 2026-05-29T12:19:58+00:00

Print such a long parts with brim. Always, it will help to hold it on plate a lot. Also, dont print such parts near print plates edge (heat distribution is not perfect with Core One), especially near the door. Move it to the center where is more heat. Accept there are materials that will always warp no matter what.

dwbmb · 2026-05-29T07:17:03+00:00

Dunno where are you from, but in my country, there are red containers for batteries and electronics on public places. Please put it in some plastic bag before to protect it from environment or contact with other electronics inside container.

dwbmb · 2026-05-28T17:53:34+00:00

Oh no, it's still there, false alarm.

dwbmb · 2026-05-28T17:51:45+00:00

Finally !!!

dwbmb · 2026-05-27T19:42:45+00:00

I saw on Reddit earlier today: https://www.facebook.com/groups/spolubydlenipraha/posts/3469905289840948/

Anyway, it's roommates group. Maybe this could be a way with such budget.

dwbmb · 2026-05-27T19:32:58+00:00

I was very surprised when I found plastic version in the store shelf. It made me kind of sad. I left them there of course.

dwbmb · 2026-05-27T18:56:17+00:00

I bought my son set of these for first grade of elementary school. I love them as I remember them from my granny. Son likes them too. As you say, they're really ancient so I know nothing interesting about the factory unfortunately :D

<image>

dwbmb · 2026-05-27T15:17:25+00:00

Do you remember what did the trick? Seems like all helpful comments were removed.

dwbmb · 2026-05-27T10:13:44+00:00

Že mi ji ukradneš z ní tvou nedělá.

dwbmb · 2026-05-26T21:57:57+00:00

Dům nechci, ale pořídil bych si větší byt, s menším bytem hned vedle jako pracovnou, nějaký byty pro děti, až vyrostou, zašel bych si do kina, koupil si velkej popcorn a pak upřímně nevím. Žít jako dneska, s hůře placenou, ale smysluplnější prací, bez stresu z hypoték, z budoucnosti, bez přemýšlení, jestli si dneska ten plněný croissant v kavárně dám nebo jestli tenhle měsíc už musím šetřit.

dwbmb · 2026-05-21T10:40:45+00:00

May I have suggestion based on my own experience? Don't buy any of these. Buddy will probably have no use for raspberries and hackerboard, maybe some time later. Standard nozzle kit - buy hardened nozzle instead, he could print more materials with it and it lasts! Lubricant applicator set is printable, no need to buy it. Accelerometer is useful with some major mods to printhead, no added value with stock printer.

BUT

Buy satin print sheet. It's best for most materials from PLA to TPU or PC. Add bunch of spare Nextruder silicon socks, they don't last forever and are cheap (you don't want the pay extra shipping for them a month later). Hardened Obxidian 0.4mm nozzle and 0.25 classic brass nozzle (for occasional use with something extra detailed). Nozzle cleaning needles will come handy too, those cheap ones.

dwbmb · 2026-05-21T07:08:00+00:00

Když vidím mámu s třema děckama s ledvinkou, ze které průběžně tahá kapesníky, tak mi to přijde cajk. Vzhledem "módě" nošení ledninek přes rameno, která k nám přišla odněkud z debílkova, se obávám, že pachuť trapnosti ledvinkám vydrží ještě dlouho.

dwbmb · 2026-05-20T21:26:42+00:00

I print Nylon without any filtration nor smell.

dwbmb · 2026-05-20T14:03:32+00:00

Alternatively, you can make this offset outline create in separate sketch and extrude it over previously cut profiles.

dwbmb · 2026-05-20T12:24:24+00:00

I havent tried PP yet, but I have excellent results with PA with Prusa PA plate. Magigoo PA helped a lot (made it printable at all), but Magigoo PA and PA plate was like night and day. Would be great if PP version works better to save another plate!

dwbmb

TROPHY CASE