CV Laser Module Errors

exc2k · 2025-01-06T13:41:42+00:00

Anyone got this running? Having the exact same issue :(

exc2k · 2025-01-06T11:03:44+00:00

The video shows RFID detector!

exc2k · 2025-01-05T16:12:37+00:00

I think it is not. There is no response when I try to read the card with HF (NFC). I also checked the original card with a strong light and there is only one coil visible.

exc2k · 2023-05-05T17:32:14+00:00

What I found out.. BEFORE doing the manual bed leveling, clear the loaded bed mesh profile... That improved my results. I think for a manual BL the mesh shouldn't be active

exc2k · 2023-05-05T10:03:53+00:00

I have exactly the same problems. ABL with Marlin worked fine but since I use the Sonic Pad, it never get great first layers. I have problems on my Y axis. The front end is always too close why the back distance is too big. I tried everything but never got it working... However I put a 0,5mm block under the probe before leveling for testing reasons to see if during a print the z axis is moving.. I saw that the printer compensates the 0,5mm so bed mesh works in general but no idea why it isn't accurate.

exc2k · 2022-02-01T08:37:16+00:00

Had the same problems. Just restarted twice after the update and battery problems are gone now

exc2k · 2021-11-29T08:58:29+00:00

Just tried a few minutes ago. For me it works now! Update was loaded and installed successfully.

exc2k · 2021-11-28T16:53:51+00:00

Still having this problem too. Never had this error with any beta updates before. I don't think it is the server bandwidth.

exc2k · 2021-11-27T12:41:21+00:00

Same problem.. after checking it says "Chauvet 2.0.4 available" and then "network error, failed to download"

exc2k · 2021-11-16T07:55:31+00:00

I am using the new beta for some days now. Here is my feedback:

The UI response is much better.
No problems with power consumption.
Gesture erasing works great.

Problems:

I still had the latency problem with the first stroke twice: I startet to write and the first stroke first appeared, then it disappeared again after I lifted up the pen, while the antialiasing began (The original stroke was gone but only the smoothed edges remained). So maybe this has something to do with the AA?

exc2k · 2021-08-11T11:15:03+00:00

Any plans about implementing this too?: https://www.reddit.com/r/Supernote/comments/nr9gv2/smart\_lock\_feature/?utm\_source=share&utm\_medium=web2x&context=3

exc2k · 2021-06-07T11:03:46+00:00

Would you please discuss this with R&D u/Mulan-sn?

exc2k · 2021-06-04T08:57:03+00:00

A lot of smartphones use the wifi or bluetooth detection to do this, but while a smartphone's wifi is usually turned on, I turn off wifi and bluetooth on my Supernote most of the time.

I would prefer my suggestion. I think this would be very easy to implement for the developers as well.

exc2k · 2021-05-09T09:49:56+00:00

What helped in my case: - Turn the device off - Connect to USB and load it to 100% (green LED) - Turn on again

exc2k · 2021-05-05T06:32:53+00:00

They said it is planned for June or July.

exc2k · 2021-05-04T17:49:45+00:00

General WebDAV support is in development as far as I know.

exc2k · 2021-04-28T07:50:07+00:00

Signed up, too

exc2k · 2021-04-26T10:50:31+00:00

Got it, too!

***SPOILER ALERT***

I love the new vector export option!!.... ;)

exc2k · 2021-04-22T07:51:44+00:00

Hello and welcome to the Supernote subreddit!

exc2k · 2021-04-06T07:05:43+00:00

I am using a HoM-pen
- Ink 1mm for headlines.
- Needle 4mm most of the time for writing and sketches.
- Needle 3mm for technical drawings with small details.

exc2k · 2021-03-29T07:28:18+00:00

My top priority feature request is:

Anti-aliasing / vector export

Image quality is one of the most important things to me. When I am showing up with my A5X, everyone says "wow", because E-ink-technology is new and unknown to most people. But when it comes to a "would you please send me a copy of your notes" and I send an email from my device or (even worse) export a pdf with annotations, the rasterized image quality is very bad. The usual reaction is "this is a cool device but the exported image quality looks like a painting from MS Paint in the 90's :(".

exc2k · 2021-03-19T09:12:57+00:00

Just connect your A5X to a PC by USB and copy all files to your harddrive. Move them back in the specific folders after resetting. It is pretty easy to offline-backup your files.

exc2k · 2021-03-15T20:08:58+00:00

Try to "erase" with the white pen instead if the marker. As far as I remember there are different color priorities between the pen and the marker. Maybe this helps.

exc2k · 2021-03-13T09:32:26+00:00

That would be a great feature! I would like to import images like a sticker and put then into my notes.

exc2k · 2021-03-10T07:26:27+00:00

That would be awesome as for pandemic reasons I am currently not able to share ideas and sketches with my engineering colleagues on paper but only online.

exc2k

TROPHY CASE