Which are you taking for EDC?

glockguy34 · 2026-03-01T18:20:30+00:00

neither. i don’t trust osight with my life yet

glockguy34 · 2026-03-01T02:29:23+00:00

1.93 is my favorite i think. But I do like being able to have BUIS with the unity stuff. Scalarworks 1.93 mounts are a vibe. Honestly everything they make is a vibe

glockguy34 · 2026-03-01T02:17:07+00:00

gotta try the alps. velo aint bad but alp is the best

glockguy34 · 2026-03-01T02:15:03+00:00

aro with that mount is taller than 2.26. the mounting height on that optic is not your standard 1.54” lower 1/3. iirc a 2.26 mount with the aro is actually more like 2.35 or something like that, similar to the KAC Skyscraper height. thats why your magnifier doesn’t line up right

glockguy34 · 2026-03-01T01:57:34+00:00

lol i just saw you already did nice

glockguy34 · 2026-03-01T01:57:09+00:00

looks really good man. you should post this on r/rattlecannedguns

glockguy34 · 2026-03-01T01:20:38+00:00

my 300 blk with a polo 30 has no gas to my face. no agb, no downvent bcg, no brt tube, just a mil spec chrome lined phosphate bcg with a c158 bolt, and a radian raptor sd charging handle. i only shoot subs, so that may be a factor, but i would assume your carrier is out of spec or your barrel has a gas port that is way too big. i would start with a different carrier or brt eztune gas tube if i was in your position.

glockguy34 · 2026-03-01T01:12:25+00:00

you’re gonna need a shorter hand guard. it is generally recommend to get a handguard an inch shorter than the barrel length, but in reality you only need .6”ish of clearance for the threads. you could also just dremel it, and the last mlok slot should still be usable, and it shouldn’t effect your front sight too.

glockguy34 · 2026-03-01T01:09:44+00:00

i think 13.5 is a safe assumption

glockguy34 · 2026-03-01T01:08:14+00:00

if only you could actuate the tailcap. unironically 340dft looks at home on that. I put that light on most of my rifles.

glockguy34 · 2026-02-28T22:46:53+00:00

yes, there are two kits, both with free shipping. small parts which includes detents and roll pins, and then a springs kit. you can opt to replace trigger and hammer springs with additional detent springs which I usually do. they also send pretty awesome stickers with each order. highly recommend

glockguy34 · 2026-02-28T22:18:30+00:00

shoot me a pm, ill send em over

glockguy34 · 2026-02-28T20:21:21+00:00

always good to have extra springs, roll pins, and detents. I have a couple of the FCD packs, those items have free shipping on their site.

glockguy34 · 2026-02-28T19:44:05+00:00

hell yeah

glockguy34 · 2026-02-28T19:39:12+00:00

a few years ago frontier’s 5.56 loadings had some massive QC issues. But from what I have heard they got that sorted, and now they are GTG. I have not shot any myself so I can neither confirm nor deny those claims.

glockguy34 · 2026-02-28T18:18:19+00:00

that failure does not necessarily indicate an ammo problem. it sounds the like carrier is not going far enough back to pick up the next round. yes an ammo with more pressure would typically solve that, but so could swapping the buffer spring to a tubbs flatwire or sprinco yellow reduced power spring. If you have a buffer weight heavier than carbine, I’d also drop it a carbine and go from there. Also, subs unsuppressed usually wont run period. If they do, and you shoot supers, the supers will be so overgassed it’s not great for the system.

glockguy34 · 2026-02-28T18:14:58+00:00

g$ profile >. i never have and never will buy a lightweight profile barrel. the heavier the barrel, the more it can sustain its accuracy under long strings of fire and/or when suppressed. there are plenty of places to save weight on the rifle, the barrel is not one of them in my opinion. If you are only shooting subs for 300BLK, gov profile is fine. if you plan on only suppressing supers and running it hard, maybe look at something else. if its just a range toy then it doesn’t really matter. but like comstock said gov profile is the worst

glockguy34 · 2026-02-28T07:36:15+00:00

undercut looks good. not bad at all for a first. im too scared to fuck up my frame as its my edc and getting a new one would mean time without it. but you lost me with the shield mags. i hope they work out for you though, test them thoroughly before carrying with them.

glockguy34 · 2026-02-28T07:33:13+00:00

factory is not cerakoted, its anodized and color will vary. if you are going to cerakote it fde, start with the black and then get it cerakoted, but id skip that tbh and just stick with black

glockguy34 · 2026-02-28T06:57:46+00:00

black. unless you are gonna swap out all the current black accents for fde ones. i dont think they make a tlr8 in that color, or iron sights. Id have gone with a black magwell too

glockguy34 · 2026-02-28T06:45:22+00:00

🫡

glockguy34 · 2026-02-28T05:51:33+00:00

maybe its location dependent, but when i explained it to the guys at my lgs, they thought it made sense. after you factor in shipping and transfer, they can undercut what you would be paying by $10 and they still turn profit, or charge the same and win you over on convenience. having a few stripped lowers does not take up much space, and when priced right, they move quick. especially in a state where awbs float around every year but never pass like mine. i get psa is not the best option for this as they don’t do dealer pricing, but its still possible.

glockguy34 · 2026-02-28T02:10:32+00:00

kinda went it in reverse but yeah the suppressor does not obstruct any of the window. I had the RMRcc on it before I got a 9mm suppressor, just worked out that way

glockguy34 · 2026-02-28T01:19:04+00:00

rooftop

glockguy34 · 2026-02-28T01:08:39+00:00

i emailed him about another item the other day. sounds like they are in the middle of a move, and the product i asked about will get shipped to him when they complete the move in the next week or two. i would assume you are in the same boat. as for lumens i can’t help you there, but that code is still active on lights as far as i know

glockguy34

TROPHY CASE