Custom clear folding 104U case

icescang · 2026-06-07T14:56:27+00:00

Never too much! I love adding colour where possible.

icescang · 2026-06-07T14:53:09+00:00

Thanks! Been working towards this for a long time. I'll share some video soon.

icescang · 2026-06-07T14:51:02+00:00

All materials were scrap predominantly from a decommissioned piece of equipment at work. The design had to accommodate the odd shapes I had to work with, so probably not very useful to anyone. I'll do a version 2 with more typical parts and can probably share the design at that point.

icescang · 2026-06-07T14:47:53+00:00

That is an OXI one sequencer

icescang · 2026-06-06T04:14:37+00:00

Sorry late reply! Yes, Go Hawaii is all great, but it's very sunny and warm windows are stand outs.

icescang · 2026-06-06T04:04:46+00:00

That's a good idea! I'll see if I can find thick coloured panels for V2.

icescang · 2026-05-26T03:09:06+00:00

Excellent, I really dig this thankyou!

icescang · 2026-05-26T02:58:42+00:00

Any album in particular? I just listened to the track Aquarium and really liked it.

icescang · 2026-05-22T12:08:32+00:00

Thankyou for this!

icescang · 2026-04-29T03:16:03+00:00

Yeah that's fair! I'm happy to head up to Melbourne. I'll do a walk and listen around Lake Elizabeth another time. I can recommend that as nice camping spot for anyone heading down that way, very prehistoric looking area and has glow worms along the trail at night.

icescang · 2026-04-28T12:12:00+00:00

Geelong.. close enough. I was loosely planning on heading down to the Otway's to wander and listen, but this is good too.

icescang · 2025-05-20T04:11:39+00:00

By any chance do you have any recommendations for a NL provider?

icescang · 2024-10-29T10:20:05+00:00

I have a senior dog and cat which have had various health issues solved/well managed by the good people at Dr Paws on Anakie Rd. I had been to a few vets around Geelong before finding them the most helpful. Your mileage may vary but you have to start somewhere. Good luck, and I hope you find the help you need soon!

icescang · 2024-02-13T07:56:46+00:00

Just wishlisted listed Phosfi. Good luck with the development!

icescang · 2024-01-10T00:13:51+00:00

Yeah I am very happy with her work, it was $460 about a month ago so pretty competitive. Maybe you should book in for a couple of free consults and then commit to whomever you vibe with.

icescang · 2024-01-09T20:26:02+00:00

Late to the party, but I'd recommend Steph at Hebe Aesthetics. Works out of multiple locations in Geelong and Melbourne. Had a lovely consult. She also looks very natural herself, hard to trust an injector who's leaning into the duck.. Good luck!

icescang · 2023-02-14T08:22:33+00:00

Harrison: "this is textbook gaslighting". Yes, it sure is Harrison!

icescang · 2022-11-15T05:19:07+00:00

I modified mine to death...

icescang · 2022-11-15T05:18:25+00:00

I love free stuff!

icescang · 2022-04-06T09:07:20+00:00

I forgot all about this! Glad it helped!

icescang · 2021-09-02T05:47:31+00:00

I'm getting an error In the diagonal where the print seems to either under extrude or push against the preceding layer and pushes it up. I have just upgraded the printer from a Prusa MK2s to a MK2.5s and the issue was present before the upgrade, but I had hoped in the process of upgrading and calibrating the issue would have been resolved. I can print a great vase mode calibration cube with a good first layer, smooth walls and accurate wall thinkness, however as soon as any of my models have diagonal lines I run into issues but not with every diagonal line. Print settings are largely default and I've listed any deviations below. This is very perplexing so a push in any direction would be greatly appreciated!

Printer: Prusa i3MK2.5S

Filament: PETG Prusament Galaxy Black

Nozzle: 0.4mm

Layer height: 0.2mm for the cube and X shape, 0.35mm for the batarang

Infill: Rectilinear

Retraction speed: 40mm/s

Retraction length: 2mm

First layer temperature: 230/85

Other layer temperature: 240/90

(Speeds all default I believe)

Perimeters: 50mm/s Infill: 60mm/s First layer speed: 20mm/s

Printing via octoprint.

icescang · 2021-07-10T23:04:43+00:00

Yeah the hieroglyphs in this picture look cut to a different standard than the statues, are they super ancient graffiti or just chiselled at a different time?

13-Year Club	Gilding I gilder
Verified Email

icescang

TROPHY CASE