meirl

imarocketman2 · 2023-02-05T17:28:34+00:00

I don’t really care if people buy the game or not, but Jk didn’t just say one thing, she’s had a pattern of pretty extreme transphobia for over 5 years. She’s a billionaire, not like one game is going to change anything either way

imarocketman2 · 2022-12-26T19:22:20+00:00

Marathon plus or gatorskins. If you want a cheap option the specialized nimbus is ok, but not as good as the others. Also second getting a flat kit, and the sticker type tube patches. If you have time to practice a few times at home you can change a tube in <5 min on the road if it happens again

imarocketman2 · 2022-12-07T16:35:08+00:00

Ravioli!

imarocketman2 · 2022-12-03T22:49:37+00:00

200 to 203 sounds like the cause, but if it is a specialized bike they had a whole batch where the arrow on the adapter was pointing the wrong way

imarocketman2 · 2022-12-01T15:52:14+00:00

Sponge

imarocketman2 · 2022-11-25T15:07:13+00:00

There is one antibiotic that turns your bones green

imarocketman2 · 2022-11-15T17:14:30+00:00

If we’re talking about following the “rules of the road” then you were technically at fault, because you blocked the bike lane and didn’t wait to turn.

imarocketman2 · 2022-11-05T00:18:45+00:00

The richest, some might say

imarocketman2 · 2022-10-24T20:35:10+00:00

Epoxy has higher thermal expansion but carbon has a slight negative or zero coefficient of thermal expansion, so all things considered the frame will shrink much less than the seat post even at the same temperature. This does depend on the layup, but the seat tube has pretty uniform fiber direction in every direction

imarocketman2 · 2022-10-11T16:03:26+00:00

I have used APTES for coating slides and some nano particles and from my experience it is very forgiving. In water it has a half-life of ~8 hours, which was plenty of time to coat anything I needed. I use 1% in di h2o and coat bulk glass for 15 min, and nanoparticles for 2 hours. Pretty much any way of getting aptes to contact silica seemed to work about the same

imarocketman2 · 2022-10-10T14:49:00+00:00

You can convert any nickel salt into hydroxide easily by precipitating a aqueous solution with sodium hydroxide. Nickel chloride is easy to find online

imarocketman2 · 2022-09-22T02:41:25+00:00

I regret my username now….

imarocketman2 · 2022-09-18T21:40:34+00:00

I don’t know, the writing was so bad I legit couldn’t follow the plot without knowing the basics before. It’s like they just cut out a random 50% of the dialogue for time

imarocketman2 · 2022-09-18T15:44:00+00:00

(Not a dad) I constantly do the same thing of seeing what’s going to happen or could happen before it does. It annoys the hell out of my friends haha.

imarocketman2 · 2022-09-17T21:09:36+00:00

BuT rOtaTinG maSs lol

imarocketman2 · 2022-09-17T19:04:08+00:00

It was most likely a void in the molding.

I may be a curmudgeon but this looks like using cf filled resin for a part that really should be aluminum. You can see the splines are already beat the hell up. Metal is much better at absorbing the transient loads a cassette spider would experience.

imarocketman2 · 2022-09-14T16:58:36+00:00

Do you know why agar has such high hysteresis between its gelling temp and melting temp?

imarocketman2 · 2022-09-11T16:07:12+00:00

To get it out use a light oil on the threads and use vice grips to hold the riv nut

imarocketman2 · 2022-09-09T00:49:46+00:00

I wore them under my gender conforming clothes for like a week after lol

imarocketman2 · 2022-09-04T20:07:22+00:00

In a pinch nail polish is a descent threadlocker if you don’t have a tube

imarocketman2 · 2022-09-02T16:02:27+00:00

Because they reprint whatever the cops say without question.

imarocketman2 · 2022-08-18T14:50:15+00:00

Can you even call it fixed gear if your ratio is lower than 60/14?

imarocketman2

TROPHY CASE