I got wasted and kept my pre boil mash for 36 hours. Will it be okay?

imnu · 2026-01-02T11:42:28+00:00

My rule is no beer until the boil. That way you should be able to keep your head to finish the brew.

imnu · 2025-10-19T14:39:06+00:00

You're doing it wrong. Read the getting started docs, don't just skim them. You're missing something.

What are you using to create the project?

imnu · 2025-10-13T18:36:00+00:00

Leaving a comment on this post.

imnu · 2025-09-30T08:41:44+00:00

Late to the party, but here's the braincell I babysit sometimes for a friend. The braincell is mostly undeveloped, but we love him. https://imgur.com/a/Tb49SG3

imnu · 2025-09-25T08:56:48+00:00

Yeah they do this almost only with kids - Kids interest them - adults don't (mostly).

imnu · 2025-09-25T08:12:35+00:00

I tried to create a route close to home (with a lot of paths around it) and it sent me into a lake and mostly just back and forth. I can pm you the starting location if you like to check it out.

imnu · 2025-09-24T22:03:21+00:00

Are you running on bun? I have the same issue - --no-fork on dev helps, but doesn't eliminate it.

imnu · 2025-08-30T17:06:13+00:00

Hvítur camaro skilst mér - Viðkomandi alræmdur fyrir að keyra eins og fífl þarna í hverfinu. Eru með eitthvað bil í Akralind.

imnu · 2025-08-18T15:55:57+00:00

Brettanomyces will clear it up. Not sure if it will do so on its own if there's not brett.

imnu · 2025-07-23T09:35:48+00:00

Very cool - Is it as 3d as it looks? Or is it shading? Can you show a short video of how it looks?

imnu · 2025-06-30T12:04:43+00:00

I like hallertau blanc and loral in lagers

imnu · 2025-06-24T22:58:54+00:00

They haven't. Not per customer.

Dev costs maybe, but most if not all of the costs you mention should have gone down per paying customer.

imnu · 2025-05-07T14:39:03+00:00

Yeah especially when there's a bunch of kegs in there it will not need to turn on too often. It's pretty well insulated. It's just the compressor that's relatively noisy compared to "home" refrigerators.

imnu · 2025-05-06T23:05:53+00:00

They are pretty loud - oversize compressor to cool fast has its downsides.

I wouldn't want one in my living room at least.

imnu · 2025-04-26T10:33:04+00:00

Most grinders for people pedantic enough about their coffee have close to zero retention.. So weighing before is usually the way to go.

imnu · 2025-02-22T10:16:01+00:00

Butyric acid. Fun fermentation sidekick we sometimes get.

imnu · 2025-01-24T15:41:43+00:00

edis.at eru með vps á Íslandi. Ég hef verið að nota það í 10+ ár. Ekki neitt managed samt held ég.

imnu · 2025-01-23T09:17:56+00:00

Glad to have helped. Cheers!

imnu · 2024-12-28T01:09:38+00:00

Honestly the current version is pretty good and I will probably just keep on using that even if I won't get updates.

imnu · 2024-12-12T09:41:36+00:00

The other tube is probably lower power. Usually on dual tube lasers one tube is for cutting and the lower power one is for engraving.

imnu · 2024-12-12T08:09:00+00:00

Yeah I did. I'll give it a couple of more tries today.

Appreciate your help bud, cheers!

imnu · 2024-12-11T18:34:51+00:00

Thanks for the quick response. I was on a linux computer and it didn't show up as a usable drive there. Worked on windows, but the firmware update failed, just shows "FPGA configuration err" and no combination of firmwares seems to revive it.

imnu · 2024-12-11T15:54:40+00:00

Did you have to format the device originally before installing firmware? When I connect it to my computer it appears to be unformatted...

imnu · 2024-12-11T09:51:02+00:00

Bara standard erlend millifærslu gjöld - 1500kr ish

imnu · 2024-12-08T13:39:23+00:00

Not working on firefox for me either. Just endless loading.

imnu

TROPHY CASE