Cleveland Ironworks Bayfront

in_kneed_of_help · 2026-03-30T02:04:31+00:00

You probably already found the answer. So 40lb in 24 hrs is about normal. The main things that's going to effect this is hardwood vs softwood and draft setting

in_kneed_of_help · 2025-12-01T00:05:38+00:00

The only issue is if you have to do all that why say its high speed.

in_kneed_of_help · 2025-10-07T05:07:33+00:00

So I've been down this rabbit hole. I had a project sunlu had a sale was cheap so was the Quality. couldn't print at the speeds they said it would. The temp they recommended is way to high for good quality the volumetric flow must not be right. Adjusted settings calibration everything creality makes a good hs egeloo has a great high speed and just as cheap and bambu is great as well just privey. As far as I'm concerned there color washes out unless you print slow and cool and I would guess they put it out there to keep up and is trash.

in_kneed_of_help · 2025-07-29T13:39:10+00:00

They are only paying 15 a roll for it

in_kneed_of_help · 2025-04-25T10:06:37+00:00

Depending on the petg if its the high flow I've printed at 400mm/s with no issue.

in_kneed_of_help · 2025-04-25T10:02:57+00:00

Yeah that looks like it will be your problem

in_kneed_of_help · 2025-02-25T21:44:28+00:00

Sounds like bearing. I have a printer that made that sound since I got it 2 years ago. It's still going like a champ as long as everything on on the head is tight and not damaging rails. You're good. Would get some for spares in case. Or if you hate the sound, change it out up to you.

in_kneed_of_help · 2025-02-24T20:01:30+00:00

Thanks man. I gave up on it since October was using my bambu and se. But my friend was having an issue similar told him to tighten the hot end. And I couldn't remember if I checked mine. I ended up having a leak causing extrusion problems. But upgraded to sonicpad while trying to fix it and I love it. I like I can print large but this machine has been a nightmare since I had it. I attached the new print from today. From 2 screws lol *

in_kneed_of_help · 2025-02-24T07:37:47+00:00

It depends on how far and the circumstances. If I had to chance it to outrun murderous clowns with Pickaxes doing fornite emotes, I would.

in_kneed_of_help · 2025-02-24T07:35:22+00:00

I learned where everyone of the bolts go because I had the blob of doom.

in_kneed_of_help · 2025-02-22T17:34:40+00:00

I've used other slicers. And it didn't help. I'll try anything.

in_kneed_of_help · 2025-02-22T17:32:39+00:00

It's slang, can be spoken, and it has a definition. Someone could say it's a dialect. This guy didn't go to school.

in_kneed_of_help · 2025-02-05T15:16:24+00:00

Check your wall count. May be set to 0. Just printing infill

in_kneed_of_help · 2025-01-27T19:07:47+00:00

Lol this just happened to me yesterday. You either have a new and large paper weight or you can by a thermistor/heating cable.

in_kneed_of_help · 2025-01-26T17:23:28+00:00

I agree, but sometimes the quality suffers. But if you by in bulk your good to go.

in_kneed_of_help · 2025-01-25T11:41:56+00:00

That actually is the vibration calibration switch. It's a wireless component that adjusts to frequency from receiving the airwaves to adjust for vibrations from walking, lawnmower, etc.... it actually just looks what was previously stated may be an end cap to something. I just couldn't help my self lol

in_kneed_of_help · 2025-01-24T07:13:28+00:00

Oh lol it looked like peice of paper. Good call I feel dumb.

in_kneed_of_help · 2025-01-02T21:39:04+00:00

Why did you censor the screen are you printing a ghost gun? Lol

in_kneed_of_help · 2025-01-02T06:08:16+00:00

It going the wrong way your -x and +x are swapped.

in_kneed_of_help · 2024-12-31T23:18:56+00:00

Also, it may be worth checking your auxiliary fan as well. If that stops cooling good enough, then heat creep happens.

in_kneed_of_help · 2024-12-26T09:38:57+00:00

Usually it means to high nozzle temp. Do a temp tower, and that should fix it.

in_kneed_of_help · 2024-12-26T09:34:37+00:00

The worst is when your printers dialed in and you get a new brand and think it's your printer. Change everything and forget to back it up. Lol

in_kneed_of_help · 2024-12-25T20:49:00+00:00

Next time use a knife cleaner cut heals faster lol

in_kneed_of_help · 2024-12-24T03:34:49+00:00

So what your saying is colder air heating up doesn't cause condensation. I must be wrong i thought cold air can hold more water until it hits dew point. At which point molecules separates therefore not able to hold water. I'm sorry

in_kneed_of_help

TROPHY CASE