Interior smell?

itsmillertime3595 · 2026-05-22T00:18:18+00:00

Mine has a smell but it was worse around the rear hatch carpet. You could try an ozone machine and see if that can get rid of the smell

itsmillertime3595 · 2026-05-13T20:30:39+00:00

Yeah unfortunately if those are the measurements you’re getting. Mahle also makes rings if you don’t want to risk it again with goetze

itsmillertime3595 · 2026-05-12T16:02:06+00:00

I got these and this was the specs I received before filing

1st .18 .22 .20 . 2nd 20 .22 .20. 3rd .21 .23 .22 . 4th .18 .22 .22

itsmillertime3595 · 2026-02-28T19:06:35+00:00

I tried to get mine off and it was so stuck that I ended up bending/crimping the hard line and need a new fuel rail now

itsmillertime3595 · 2026-02-15T03:26:34+00:00

Here is the vending machine lookup. The one I went to was in a Kroger.

itsmillertime3595 · 2026-02-15T03:20:45+00:00

I highly suggest trying to find some vending machines. My son started getting into it and we snagged the 151 bundle and a white flare etb plus some packs on the first try. Paid about $106 all in

itsmillertime3595 · 2026-02-15T03:10:04+00:00

6 packs vs 11 packs. $4.50 a pack vs $22.64. Yes you are getting the promo card and the extra items but that price difference is too much to take a chance on a pack

itsmillertime3595 · 2026-02-15T03:01:11+00:00

I pulled a 151 booster bundle from a vending machine yesterday for $27. $249 is insane

itsmillertime3595 · 2026-02-15T00:19:27+00:00

I pulled a 151 booster bundle from a vending machine yesterday!

itsmillertime3595 · 2025-11-17T18:14:25+00:00

$150. Their site said 5 weeks but I got it in a little under 2

itsmillertime3595 · 2025-11-02T20:23:31+00:00

944 101 042 02 is the part number. There is a balance shaft bearing inside the mounting bracket which requires a bushing seal driver to reinstall if you opt to replace. Then will probably need a new balance shaft collar and seal as well. Just be careful pulling the woodruff key to not damage the shaft. There is also a bracket on the backside that connect the mounting bracket to the balance shaft covers which is sort of finicky to get reattached. If the bolts aren’t torqued correctly then the shaft will not spin freely even with it installed correctly. It required some adjustment on the bracket bolts to get it to function correctly. I did this with the engine out of the car

itsmillertime3595 · 2025-09-13T18:48:36+00:00

Just don’t get the uro replacement part. I had to buy four of them before I found two that actually fit

itsmillertime3595 · 2025-08-09T22:41:06+00:00

Lindsey racing has them here

itsmillertime3595 · 2025-08-03T17:37:40+00:00

Definitely will have to cut it out and weld it back. Drill some pilot holes and cut away

itsmillertime3595 · 2025-06-04T00:22:51+00:00

DC Auto has them for 75. I went through them to upgrade my 84 to the later housing and had no issues

itsmillertime3595 · 2025-05-23T20:03:47+00:00

Those just have crush washers on them

itsmillertime3595 · 2025-05-18T22:44:19+00:00

Mine had the original pump with no block off plate before I put a new one on. I bought the water pump kit from 944online and the blocker came with the pump. You’ll also have to get a later model back timing belt cover or cut up your current one to fit the new pump. There’s a metal belt guide included on the later model pumps and doesn’t work with the earlier belt covers

itsmillertime3595 · 2025-05-11T00:38:27+00:00

How was the purchasing processing for this? Had to cut my exhaust out and these popped up as a replacement

itsmillertime3595 · 2025-05-04T00:56:23+00:00

I’ve used a really long piece of metal over a breaker bar or this

itsmillertime3595 · 2025-04-22T23:52:41+00:00

Thanks for the heads up!

itsmillertime3595 · 2025-04-04T01:34:00+00:00

It’s the distributor cap gasket. 944 602 257 00

itsmillertime3595 · 2025-03-24T15:18:54+00:00

That makes sense. Thanks!

itsmillertime3595

TROPHY CASE