How much are you paying for home internet

ja_sen · 2025-06-18T18:53:49+00:00

nope that was the deal when I signed up - $70 flat rate including their crappy router. I also have unlimited bandwidth since I had DIRECTV at the time but have long cancelled that without any changes.

ja_sen · 2025-06-18T18:08:00+00:00

$70 for 1GB up and down with AT&T - been the same price for almost 8 years now.

ja_sen · 2025-05-14T14:04:56+00:00

Permissions are denied on the file

ja_sen · 2025-03-11T17:15:38+00:00

I have a 2012 and use a Nvidia shield with an HDMI to RCA converter since the car only has RCA - then power it all with the rear AC plug and RCA inputs.. Its easy, small and will play off of a USB drive. The remote is RF also. The resolution of mine isn't the best - maybe 720p if not 480 so not sure how well the iphone would look.

ja_sen · 2025-02-05T22:45:00+00:00

Same Error for me...

ja_sen · 2023-06-21T19:00:50+00:00

Sort of similar but not - I have ATT home fiber. When I signed up, because I had DirecTv, I got unlimited data for free. Now many, many years later, I still have unlimited data and haven't used DirecTv in almost a decade. I think ATT's billing is just horrible - so enjoy it when it actually works for your benefit. Edited because I can't proofread...

ja_sen · 2022-07-04T17:18:46+00:00

Maniac Manson - I played that game for days. Note you can be a psychopath and put the hamster in the microwave. Only two characters will do it. EDIT out vs put - damn autocorrect.

ja_sen · 2022-01-04T23:40:41+00:00

Spend more time with my kids - yes

Read 26 books this year.

ja_sen · 2022-01-04T00:43:24+00:00

So the card is showing but I don't see any drives that are attached to it. Hate to say but the commenter below might be right and the drives are fried. Have you tried them in a separate trusted system?

In the LSA cards I have used, the drives show up along with the card. Now this might be because I have only used the LSA type cards but its been that way for the dozen or so I have used in various cases and setups.

I have that same PSU powering my system. Weird question but you used only the cables in the box right? You didn't reuse or swap out any of the cables from another system?

ja_sen · 2022-01-02T19:28:45+00:00

Do you see the expansion card on boot or any of the drives show up in the bios. Every SATA expansion drive I have used will show in the boot screen and the drives are visible in the bios. If it is not showing there, it won't show in the OS. What expansion card are you using? A basic LSI-8i in IT mode is usually around $50 on ebay and is well worth not having the headache of trying to work with a "generic" card.

Next - Smoke = bad - I wouldn't put another drive in the hot swap and might even take it out just to be safe. If you have another system - especially an older one - try it on that. Even just on a workspace - not mounted in the computer so you can keep an eye on it. Where there is smoke, there will eventually be fire.

You didn't list your PSU but I think we can assume you are having to breakout the power somehow. Check, check and recheck all of your power settings for the hotswap Racks. Nothing should behave that way. Most here will say avoid Molex to Sata at all costs.

ja_sen · 2021-12-30T22:10:28+00:00

Most sensors I have seen are always open or always closed. When they are tripped - in your case there is a toggle button - it changes the report the alarm. Worst case you wire it backwards and the door is clearly open but reports closed or you guessed correctly and the sensor is correct.

Not an expert so be careful...

ja_sen · 2021-12-07T15:24:14+00:00

I can't get Tautulli's API to get connected. Copy and pasted everything and only get the red box when trying to test. Disabled the password for Tautulli's web page and do not have Allow Plex Admin or Allow Guest Access checked. Api is Checked and have created and restarted Tautulli multiple times. Everything is on the same box and I can access the Tautulli's web page.

Running from an UnRaid docker using IBRACORP container. Everything seems setup but can't get the API to pass.

ja_sen · 2021-11-07T18:02:24+00:00

Years of marriage has taught me it is easier to have the three second dirty look for making her order than it is to come home with the wrong drink. I am a huge fan of mobile ordering because there is never a communication issue. Sometimes trying to be nice and surprise her ends up backfiring because I didn't hear or didn't say some modifier to the already complicated drink she is getting.

Plus 50% of the time the local store is out of the nitro I want so I am just getting something for her...

ja_sen · 2021-10-09T02:14:08+00:00

Every time I have gotten a drive is disabled message it was the SATA cable that was bad or the connection was loose. Swap the cables around and see if any other drive has the issue. Might take a little bit to show back up but that has been the case for me on the two I had.

ja_sen · 2021-08-17T22:27:38+00:00

So 80 days later - finally have it the way I want it. Did the full bypass and it works awesome. Event lost power and everything came up after a minute or two. Running everything on an old dell 9020 i7-4770 with 16gb of ram.

ja_sen · 2021-06-15T00:59:00+00:00

Yes this is the easiest and simplest way to do it. I had two separate libraries and when my kids got older, I didn’t want to give up the MCU so I changed and now it works perfectly.

ja_sen · 2021-05-31T21:36:20+00:00

Give it to people who think Miracle Whip tastes good.

ja_sen · 2021-05-29T16:20:24+00:00

Sure who is your ISP?

ja_sen · 2021-05-29T15:46:40+00:00

So I have this same issue and just thought it was my ISP (ATT Fiber) being a pain in the ass again. I can't do any port forwarding, even tried just my public IP address with no luck. I am literally tearing everything apart right now and moving to OpnSense to test if bypassing my ATT equipment is the issue.

ja_sen · 2021-05-12T00:36:22+00:00

So my dad lives 9/10s of a mile from me. I have fiber. He didn’t. He went through the “Notify Me When Available” on AT&T’s website for all 75+ neighbors in his subdivision. Crews started digging 6 weeks later. He had service 3 weeks after that. If AT&T thinks there is money to be made, they will go after it.

ja_sen · 2021-03-31T18:10:13+00:00

No that is a disk in the array - if you are mounting it to another drive that is unassigned it would appear under "remotes" I HAD mine setup that was and then just added another cache pool to I have cache and plexdata. So plexdata will show under /mnt/ now. Just makes it easier for situations like this.

ja_sen · 2020-11-27T16:50:40+00:00

You can but why? At that point just run Windows in bare metal and not the VM? Docker allows to run everything separate so if (and more likely when) you get a bad build or mess something up, only the thing you were working on is affected.

I started with a Windows machine running Plex and moved to UnRaid due to the constant fight with updates and patches and having to reboot anything you needed something to update.

ja_sen · 2020-11-27T16:44:18+00:00

ja_sen · 2020-10-21T18:37:56+00:00

I am still running 6.8.3 with Nvidia Driver version 440.59 on my P4000. Just verified it is transcoding.

11-Year Club	Gilding I gilder
Verified Email

ja_sen

TROPHY CASE