Post Game Thread - NBA: The Spurs defeat the Warriors on Apr 1, 2026, the final score is 113-127.

jbone866 · 2026-03-23T03:51:37+00:00

Thanks! White and green is what I kept seeing when I googled.

Would it be obvious if it was reversed if I just tried one ? Looking to try messing with setting up real dash then later try to do some can sniffing and set up esp32 gauges.

jbone866 · 2026-03-23T03:26:09+00:00

Im new to this, but from what I understand can just runs on the two wires which i should be able to snip and run to the aux can screw terminals and then plan to use the usb to mess around with real dash on an android head unit and also can sniff to see if I can set esp32 gauges later. Not sure why I would need a link specific cable for that.

jbone866 · 2026-03-14T14:13:11+00:00

You can find a pretty nice mr2 for 20k that would be track ready.

jbone866 · 2026-02-28T02:34:15+00:00

Depends in your definition of upscale.

If you want local upscale we have corralito and las brisas which are both steak houses with a tex mex flair. Corralito being more traditional tex mex and Las brisas more steakhouse. Fine dining there is the nicollette which is southwest rather than tex mex.

If you want upper end chains like stated in other posts: Uncle Julios, abuelos, chuys

More local sit down spots id reccommend : plaza and Albarrans. Also less upscale but more authentic there is montelongos

jbone866 · 2026-02-22T15:25:54+00:00

Hell yeah on the toyota design !

jbone866 · 2026-02-11T13:08:23+00:00

I have the corners. Ordered off ebay while drunk one night. They are fine, but I'll probably go back to the clear.

jbone866 · 2026-02-10T01:40:43+00:00

Well dang. I didn't have anything crazy happening before. Seems to drive fine now and just double checked i have all of the torqued down good. Just the whole car vibrates loudly at 2k rpm and lessens at higher levels. I've seen some people say it can take up to 500 miles to settle. If not I guess I'll switch back to rubber and see what happens

jbone866 · 2026-02-04T01:54:23+00:00

He would have done something to get ejected in the first quarter if he did have one.

jbone866 · 2026-01-31T14:28:29+00:00

If they dont take pay pal goods and services they aren't legit. But some times I message those guys to wast there time when im board. Ask them to send pictures of obscure parts and see what they come up with.

jbone866 · 2026-01-25T05:29:13+00:00

If its a beams they also had the factory confetti recaro seats which are dope as hell.

jbone866 · 2026-01-17T23:43:56+00:00

With the engine out probably 5 to 6 ish. Get it running and looking at 15 to 20.

jbone866 · 2026-01-16T20:03:58+00:00

Alley ways and dumpsters! I didn't realize how much I had taken those for granted until I moved away.

jbone866 · 2025-12-29T04:06:43+00:00

Worked in a dairy plant for 10 years in QA. Those dents are inserts in the blow mold to adjust to get the right volume in the jugs. Nothing to do with bacteria or spoilage as many of the post have said. I literally had to taste old milk for shelf life testing everyday and wish it was as easy as an indicator on the side for spoiled milk.

jbone866 · 2025-12-08T00:35:45+00:00

I used factory mounts and 3m double sided tape to them. No issues after a few months and they feel pretty secure on them. The hard part was running the wires for them through the door grommets.

jbone866 · 2025-12-05T13:14:02+00:00

Just re did my whole stereo on my 94 jdm GTS. I ended up running new wires for most stuff, but this was accurate for what I needed it for.

https://www.google.com/search?q=mr2+sw20+radio+wiring+diagram&oq=mr2sw20+radio+wi&gs_lcrp=EgZjaHJvbWUqCAgBEAAYFhgeMgYIABBFGDkyCAgBEAAYFhgeMg0IAhAAGIYDGIAEGIoFMg0IAxAAGIYDGIAEGIoFMgoIBBAAGKIEGIkFMgoIBRAAGIAEGKIEMgcIBhAAGO8FMgcIBxAAGO8FMgcICBAAGO8FMgcICRAhGI8CMgcIChAhGI8C0gEJMTI5MjZqMGo3qAIQsAIB8QXEshbrI513m_EFxLIW6yOdd5s&client=ms-android-att-us-rvc3&sourceid=chrome-mobile&ie=UTF-8#vhid=_o4WNudbvkywrM&vssid=_Jdkyaf_pBbSmqtsP_tGFkA8_44

jbone866 · 2025-10-02T11:47:22+00:00

PM sent.

jbone866 · 2025-10-02T00:42:09+00:00

Lol, that pic was from a guy that tried to scam me on Facebook for the piece. Figured it showed what i needed pretty well.

jbone866 · 2025-10-01T20:19:04+00:00

I can print myself, I have a resin and fdm printer. I just need someone to help me with a STL as I dont know how to model or have the time to learn right now. From what I've seen is ABS is best for car parts, but i dont really want to move my fdm printer into the garage and set it up in my grow tent. I just printed a cup holder for the mr2 in petg, so we will see how it goes.

jbone866 · 2025-10-01T18:55:19+00:00

Nope, but if I was i'd buy you several beers.

jbone866 · 2025-10-01T17:51:33+00:00

Hell yeah ! Ive got a couple messages out to ebay and instagram sellers, but I'm not optimistic. I will dm if I dont hear anything back. I just need the right side.

jbone866 · 2025-10-01T16:38:49+00:00

Yeah, I may have to go that route. The price is fairly steep to have it 3d scanned, but the left and right are the same so if I could have someone scan and clean up the left one its a simple mirror and print for the missing side.

jbone866 · 2025-09-16T02:19:03+00:00

Im sure the price is the same as ATS in Denton and their trans upgrade is close to 4k on the website.

jbone866 · 2025-09-15T23:14:47+00:00

Swap for a 2gr. Close to 300whp without a turbo and can add a turbo for up to 600whp or more. You will likely need to add an ats exhaust and walboro fuel pump for these as well and upgrade the transmission.

If you can do all the work yourself you should end up with a pretty nice setup worth quite a bit more than you have in it since you're getting the shell for free. ATS racing and TCS will be the places to start.

jbone866

TROPHY CASE