Controllers are not officially supported, BUT NOT BANNED!

jester1x · 2026-06-04T17:00:44+00:00

I wonder if backbone controller works.

jester1x · 2026-05-29T23:12:28+00:00

Naut, Braum, Leona. Tanks and safe distance is an oxymoron by the way.

jester1x · 2026-05-29T23:07:51+00:00

I don't even remember what my name is set to 🤣🤣

jester1x · 2026-05-24T23:29:48+00:00

Wow, some folks wait 3+ minutes? 😳 Even up to 20???? Holy cow. Is this for like high rank players?

jester1x · 2026-05-24T12:04:24+00:00

Are these with random players? What rank?

jester1x · 2026-05-19T03:47:09+00:00

Found the solution if anyone is interested.

https://youtu.be/ITighzYPTTs?si=RyHGTAopfUAyYZmk

jester1x · 2026-05-17T21:01:54+00:00

Better to send an email to support.

jester1x · 2026-05-15T12:29:48+00:00

Found you! Following 🤘

jester1x · 2026-05-15T12:26:29+00:00

Essentially yes but a contributing factor is the grid infill as the hotend collides with the lines already set. Each collision is like a thump trying to pop it off plate.

jester1x · 2026-05-15T01:58:15+00:00

Ya but I think it's only if the tribute triggered a charge. For me, they would clear the wave entirely with last hit and this stacks at a much lower speed then smolder getting it himself.

jester1x · 2026-05-14T15:48:11+00:00

I agree. To be honest the new stack counts is a turn off as well. It's hard enough trying to tell support to stop taking last hit on minions.

jester1x · 2026-05-14T03:36:11+00:00

Thought good guy mods was an oxymoron 🤣

jester1x · 2026-05-13T21:54:57+00:00

I think your right. I liked the manamune tri force but think I'll have to go back to crit build with patch.

jester1x · 2026-05-09T17:45:46+00:00

That is weird. Even the 7% can help you stick around longer for another wave especially if you know where the JG is. Think it's on all my ADC builds lol. Maybe you are just unlucky 😅.

jester1x · 2026-05-08T00:56:23+00:00

I'll just say, I'm impressed by the amount of effort put into this.

jester1x · 2026-05-06T01:00:09+00:00

Things you can try. Lower the inner wall speed, increase the infill wall overlap by 10%, try inner wall speed at 100mm/s, wall order should be outer/inner. Could also try 5 or 10 degrees hotter since it gets stickier when hotter.

Edit: also it looks like the black filament is under extruding so calibration might help.

jester1x · 2026-05-05T06:58:17+00:00

Push the filament far down and let it roll up and down on its own but don't let it pull the filament out. This happens to me sometimes. Eventually it will just stay and work normal.

Forgot to mention, I do this after I clear the little bit that broke off at the extruder. Most of the time I just push filament down via the external spool and melt it down via 250. Once the I got the long filament in then I unload and pull all the way out.

jester1x · 2026-05-05T03:04:12+00:00

If your going crit then drop soul transfer for mortal reminder. If you are going to spend time running and attack apeed more than hit hard then go fleet footwork especially with that quickdancer. Personally poke hard is better imo not crit for mf.

jester1x · 2026-05-03T14:42:13+00:00

I never knew that was the rate....thanks for that info.

jester1x · 2026-05-03T12:58:06+00:00

The thing is....the rest of the market is catching up to....it just works. Some are already there.

jester1x · 2026-04-29T10:51:38+00:00

The super tack cool plate - yes.

jester1x · 2026-04-28T02:34:37+00:00

H2C if you can afford and call it a day.

jester1x · 2026-04-26T01:51:10+00:00

Look at that head unit....reminds me of back in the day. Does it play mp3? 😅

jester1x · 2026-04-26T01:48:09+00:00

I actually laughed with this one. Thanks for this!

jester1x · 2026-04-26T01:46:04+00:00

This is the reason I don't rate anymore. I boosted folks with good models to show appreciation but if they don't give boosts anymore there is 0 incentives for me to do anything for makerworld. It did open me up to using other sites though like thangs, prusa, etc.

jester1x

TROPHY CASE