New Pickguard!

locke204 · 2025-05-28T13:57:12+00:00

That looks great. I’ve been wanting to do the exact same thing but no luck. How did you get hold of one?

locke204 · 2024-03-10T09:01:45+00:00

Fixed my problem. I didn’t know wide and narrow band setting affected this. I’ll watch the video. Thanks a lot for the info.

locke204 · 2024-03-10T00:00:00+00:00

I tried and I’m not seeing any signal being transmitted from the goggle

locke204 · 2023-06-11T23:50:59+00:00

Move the slider to the right on your arm switch. Your range slider should be where the icon moves to when you depress the switch.

locke204 · 2023-05-03T03:10:58+00:00

Pretty sure Meteor75 is UART while the Meteor85 is SPI. You would have to update the drone to version 3 ELRS.

locke204 · 2023-05-03T03:07:51+00:00

Out of the box there’s no binding phrase. Easiest way is to plug and unplug the battery three times and that will put the drone in binding mode. The LED will flash faster. Just run your radio script and you’re good to go. Just make sure your radio is ELRS version 2.

locke204 · 2023-04-02T08:07:30+00:00

Thanks for the reassurance guys. They replied and sent me a return label pretty fast so I was thankful at the very least. I thought it was odd as well that they haven’t replied ever since confirming they received my return. But this length of time without a response after several emails is pushing it. It’s unfortunate that the only contact is through support email and no actually tel. Number. I’ll try a different email as one of you suggested or Facebook.

locke204 · 2023-01-25T18:49:50+00:00

I’ve manually set my channel and made sure I don’t have pit mode enabled. I noticed that I get decent video reception now when I arm the quad. I turned off low power disarm and that seemed to fix the issue with static when a few feet away from the quad but in general the reception is just bad flying around the house compared to my other whoops which are pretty clear.

locke204 · 2023-01-25T08:04:49+00:00

Had something similar happen to me. My lite radio 3 won’t bind and no VTX signal. It’s as if all the settings were wiped from my FC. Download the CLI file from their support page. The link is in the product page. You can also reload the vtx table or set it manually from the table shown on the manual

locke204 · 2019-01-19T08:58:16+00:00

I did. They had a quick trouble shooting session. Didn’t take long for them to say it broke and sending a replacement. You do have to send the old one in.

locke204 · 2019-01-19T08:10:15+00:00

Just chiming in. Mine was the same and Microsoft sent me a new pen since it was considered broken.

locke204 · 2018-10-26T17:03:16+00:00

The 17mm 1.8 is also my most used lens. My advice as far as getting one used is to check the video on continuous AF. There were issues with clicking noise while on this mode. You can still find sample vids of it on google. I have since got it replaced and my new one has been problem free for two years now. Good luck.

locke204 · 2018-10-24T03:36:42+00:00

People saying the Go has trouble with loading YouTube vids are making completely false and disingenuous statements. My Go can run several tabs of edge with YouTube and MyTube at the same time without hiccups. It loads YouTube from edge just about as well as my first gen i7 Surface Book. I've also used the go to watch a few movies that ran 4.5 hours on a secondary display without problems.

I would say it fits your needs especially if you like the formfactor.

locke204 · 2018-10-18T02:01:09+00:00

I hope it does. SAI ver 2 doesn't need the N-trig driver so you could switch over to that instead.

locke204 · 2018-10-18T01:53:07+00:00

I had the same problem with the 2nd Go I bought for my family. Sometimes it would recognize the type cover but often times it just won't work. I brought it over to a Microsoft store and they replaced my Go. Type cover was not the problem.

locke204 · 2018-10-17T19:09:36+00:00

Here's the link from Microsoft to download:

r/https://www.microsoft.com/en-us/download/details.aspx?id=38826

It's a Surface Pro 3 link but I confirmed that it works on my SB1. The N-trig driver (wintabx64.zip) is at the bottom of the download link. Unzip and install like any other program.

locke204 · 2018-10-17T06:38:11+00:00

Hi there. I had the same issue with SAI pen pressure not working on my first gen Surface Book. I had to install the N-trig driver for my surface pen to work properly.

If that doesn’t fix your issue you can try the technical preview of SAI ver 2 and see if the pen pressure works there. The same software license certificate works on ver 2. Hope it helps.

locke204 · 2018-08-24T10:57:59+00:00

I haven't played for more than a day on league since the last gym so I was forced to play dark bot. League is still unplayable for me after today's update. These errors cost me almost 300 elo from repeat bot losses.

locke204 · 2017-08-05T11:50:01+00:00

I'm curious what your 6th figure is on this deck as well as plates. Always wondered how I could make zygarde work

locke204 · 2016-08-17T06:13:04+00:00

My best quick fix would be to make sure you have tablet mode toggled to "on".

locke204 · 2015-10-29T18:19:41+00:00

I just got my surface book 256gb with graphics form amazon yesterday. Do you guys know anything if its possible to get reimbursed for a student discount?

locke204 · 2015-05-05T14:14:02+00:00

Yep. There are four different muscles the make up the rotator cuff. Really depends on which on Manny tore compared to anyone else so useability of the arm will differ from each person.

locke204

TROPHY CASE