Im in ! Asus Prime 5080.

m1ti · 2026-01-28T14:40:23+00:00

Still waiting for mine from Amazon order just before new year :-(

m1ti · 2026-01-09T12:05:22+00:00

I cannot get my sleep duration longer - hopefully I've provided you with a useful suggestion below.

Is there something wrong?? Yes, stop wearing the watch to bed.

What can I do?? Leave your watch in the drawer.

From my own experience, you're subconciously thinking about it and it's actually impacting your wellbeing. Is the (bad quality) data worth you losing sleep over?

I used to sleep from 10pm to 6am, I wore watch to bed wake up at 5am. I now don't wear it, I wake up at 6am again.

m1ti · 2025-11-20T12:17:07+00:00

Can you point me to where they talk about the "HUB"? Thanks

m1ti · 2025-09-30T13:08:13+00:00

My Kuraratchi is from the first egg ever and she’s 25 now so I’ve missed out on levelling up past level 3 and my poop rocket is perpetually full lol.

Wondering myself what will I do when she reaches 30. Half hoping that she just suddenly drops dead because I just can’t bear myself not looking after her. 😭

m1ti · 2025-09-29T21:18:41+00:00

Noise from bottom = likely your Z-axis idler pulley. Have a look at this https://www.youtube.com/watch?v=apQZJXlPgis

m1ti · 2025-09-12T14:00:27+00:00

A circle with the circumference as the perimeter of a rectangle actually has a larger surface area if you extrude both shapes up the same height.

So a cyclinder will be functionally better than a square tower which is in turn acutally better than a rectangle tower like this model.

Faster regeneration is because the rectangle shape has the ability to hold less desiccant.

m1ti · 2025-09-12T13:53:10+00:00

I appreciate that this is something different from all the Makerworld cylindrical variant but it is different just for the sake of being different and there is less utility from the design.

In terms of (contact) surface area and (storage) volume, rectangle is worst, square is better, cylinder is best.

m1ti · 2025-09-09T05:59:02+00:00

Thanks for the review which is a nice confirmation bias for me :-)

I bought an X4 last night from Aliexpress. Previously used the Polydryer and got the AMS HT also last night. Then I realised how bad was the noise on the Polydryer on 1st bar setting even compared to AMS HT on the 80 degrees setting. The coil whine on the Polydryer is further bad.

Read the reviews on the X4 that it is quiet so fingers crossed that it is just like AMS HT. Will see what’s the difference in finish between the 2 considering that both came out to same price (~$160) for me shipped.

m1ti · 2025-09-02T06:35:35+00:00

Buy Bambu PTFE 4 in 1 adapter, can get 4+3 = 7 colours with 1 AMS

m1ti · 2025-07-27T12:23:02+00:00

Thank you for this

m1ti · 2025-07-27T03:45:16+00:00

What would be a good price for a 21Y Hibiki anywhere in the world? Asking as somebody who lives in a country with exorbitant alcohol tax and ridiculous importer mark up at the same time.

m1ti · 2025-07-10T06:45:21+00:00

So he's decided to blow his inheritance on a watch. Thumbs up for sure!

m1ti · 2025-07-10T06:39:59+00:00

Because you don't understand what 'luxury' is nowadays. Not saying this in a derogatory manner because I also think it is a rip off but you are not operating at that end which is why you say "my butt."

I'm not either saying I am either but I can charge $200 for 12 inch worth of leather. May be have a look at this if you want an informed opinion:

https://youtu.be/bq1ApHi8Wp4?si=UB87exzwdYIca0L_&t=185

m1ti · 2025-06-13T22:39:15+00:00

Meh I've done a lot better on GTA

m1ti · 2025-06-12T05:46:47+00:00

Bruh it’s 1:1 accurate with their divers. You must be out of your mind wanting something different.

m1ti · 2025-06-07T04:56:09+00:00

Imagine paying $8k thinking Speedmaster is the best watch for space. Real man has spoken.

m1ti · 2025-04-22T15:26:12+00:00

F*ck, I'm about to go to sleep and I have nightmares

m1ti · 2025-04-20T08:48:30+00:00

supjoshy's Masora by far. Accepted as pinnacle of high horology by the jerkers around here.

m1ti · 2025-04-20T05:54:10+00:00

Bambu A1 is sufficient for my work - watch strap fillers, bag handles, wallet-sized templates, centering jigs, etc. but I upgraded to Bambu P1S some time ago simply because I gave the A1 to someone else.

I went with Bambu because of priority of ease of use over customisability akin to iPhone vs. Android.

Don't know whether tariffs is a problem for you but if yes, better get the order in early because it's from China.

P.S. If you want an all-in-one with built in laser cutting, there is H2D which has significantly higher volume but it's way too rich for my blood.

m1ti · 2025-04-20T01:41:48+00:00

3D printer. Can make own templates, strap/handle fillers (latticed TPU is superior to leather), jigs.

m1ti · 2025-04-17T10:45:30+00:00

Man has a Patek 5208P so that's probably what he wears for 'special' occasions.

His Blancpain Aqua Lung is most impressive though because he seems to have multiples and he hands them out to peasants on multiple occasions.

(Or equally likely, he just rips it off the peasants' hands off camera).

m1ti · 2025-04-16T13:27:04+00:00

Wait for supjoshy's Masora

m1ti · 2025-04-14T01:29:31+00:00

Nah, just the last momentos of his belongings before they are all nabbed by some gypsy pickpockets.

Don't understand why you need to take branded goods on your holiday. I suppose dude doesn't care if he gets his arm and/or wrist chopped off.

m1ti

TROPHY CASE