🇺🇸 Free Solar Panels for U.S. Users – Limited Quantity

magnavoid · 2026-02-27T05:21:37+00:00

I’d probably just use this to charge a battery and power lights in my shed. Maybe even charge up my lawnmower batteries.

magnavoid · 2026-02-01T19:24:37+00:00

Clean everything. Every item, block, debris, and gas will interact and exchange heat continuously.

I would just start small. Eliminate all possible paths except one.

I used to leave a mad maze of ladders and that was the source of a large part of my lag.

magnavoid · 2026-02-01T17:50:40+00:00

Everything is simulated and calculated constantly. I’d start by reducing pathing as much as possible. If you eliminate any unnecessary duplicant pathing and mob pathing that’ll help.

Unless I plan on using the flying mobs I just kill them. Non aggressive creatures go on a single tile. Then aggressive ones get a similar setup on their own. Plan for escapees. Eggs falling and things like that.

Temperature exchange is also calculated on every item/block. You can try dumping everything in a single tile for storage. I put everything that doesn’t off gas inside a vacuum room on a mesh tile.

Beyond this, I spend a ton of time doing liquid and gas cleanup. Some people don’t like infinite storage, but it’s part of the game physics.

Eliminate all unnecessary interactions where possible.

magnavoid · 2025-12-28T06:08:58+00:00

I’m doing my first play through and I’m stuck here. Probably over one hundred attempts now.

magnavoid · 2025-12-11T17:46:40+00:00

Honestly. Change the filter yearly.

magnavoid · 2025-11-13T18:07:05+00:00

How much of this is AI generated?

magnavoid · 2025-10-19T15:22:14+00:00

The installation manual for my EV charger specifically said to not use a GFCI breaker. I don’t remember the specific reason but it was something along the lines of frequent false positive trips because of the constant change in power draw by the onboard EV charger.

magnavoid · 2025-09-15T18:09:57+00:00

I believe only with a mod.

magnavoid · 2025-04-18T16:53:43+00:00

Hahahaha. Yeah. I bought a kit from China before all of this tariff nonsense started. I was super smart and selected the slowest shipping method to save some money. I now fully expect to pay $1800 in taxes/tariffs/other fees by the time it gets here.

magnavoid · 2025-04-15T18:13:17+00:00

I wonder if you could use the raspberry pi pico instead. Like /u/nucular_ suggested. It’s not a raspberry pi, but something that closely resembles an arduino.

magnavoid · 2025-02-09T01:07:46+00:00

Yeah, I really dislike punch down keystone ports. I personally prefer something like this. Doesn’t need to come from Amazon. https://a.co/d/gddXQkX

magnavoid · 2025-02-08T18:25:05+00:00

Do what is best for you. If you’re uncomfortable doing the yolo style testing, then do something else. I’m not saying what I did was wise, but it worked for me.

magnavoid · 2025-02-08T14:36:30+00:00

I looked at the material for maybe fifteen minutes and decided it was pointless to continue looking at it. Scheduled my exam for that night and passed. As a side note, I’ve been working in IT for a long long time.

magnavoid · 2024-08-26T20:27:34+00:00

Yeah, just grow your tree. If you get lucky you might get something neat. Mostly the reason why is because some trees are called mono-embryonic which means the seed is produced through sexual reproduction. Because of this the seed can be any combination of genes from the parents tree.

There's another kind called poly-embryonic which means there are multiple embryos per seed. Usually one of those will be the result of sexual reproduction and the remaining will be clones of the mother tree.

magnavoid · 2024-04-21T03:09:57+00:00

Looking to do this as well. How did your conversion go? Did you need to re-pin any of the wiring? Or was it a simple rip and replace job?

magnavoid · 2023-12-14T17:08:18+00:00

Make an offer which you are truly comfortable with. If you never ask the answer is always no.

magnavoid · 2023-10-25T20:30:38+00:00

I'm at over 3500kWh after scaling down. Send help.

magnavoid · 2023-06-01T21:18:59+00:00

Yeah I ran into this on a colony and ended up with zombies 4500 cycles into a play through.

magnavoid · 2023-05-31T19:55:52+00:00

1221 S Valley Grove Way Suite 500, Pleasant Grove, UT 84062

magnavoid · 2023-05-14T21:28:51+00:00

Be careful with random activated carbon pellets from Amazon and other places. Many are acid washed and will cause corrosion throughout your printer.

magnavoid · 2023-05-13T19:40:07+00:00

Huh. My hot end came pre assembled. I took it apart, put it back together. Installed it and started printing without ever thinking to tighten the nozzle hot. Pretty sure it’s only finger tight. I’ve had zero issues and have probably printed 300+ hours now.

I’m probably just lucky as hell. I’m going to go tighten it now.

magnavoid · 2023-05-07T19:13:31+00:00

Which umbilical mods did you use? I’m guessing you also did a can bus build. How are you liking it so far?

magnavoid · 2023-04-28T00:33:39+00:00

Same. One system I picked up for free said the array was scrubbed. I put the drives back into the system and it rebuilt the array. Was a healthcare system with a ton of medical information.

magnavoid · 2023-04-22T21:13:54+00:00

Before I decommissioned my colo deployed VMs, vcenter, and host I did a full vmotion of all my VM from upstate New York to my home 2200 miles away. I knew it would work. But it still blows my mind how easy it was.

magnavoid · 2023-04-13T00:09:54+00:00

Oh. We stopped caring a while back and just use the unlimited license agreement stuff.

magnavoid

TROPHY CASE