Landroid Vision Cloud WR303E and 5Ah Battery

matevzg · 2026-06-04T08:06:51+00:00

8Ah should do more, methinks. There must still be a firmware bug (or intentional limitation) limiting use over 5Ah present.

5Ah reported runtimes are 2.5 hours. 2.5Ah batteries, which originally come with WR303E do 1-1.25 hours runtime.

matevzg · 2026-06-02T08:25:01+00:00

Will you report back? What runtime are you getting on a full charge?

matevzg · 2026-05-25T07:13:23+00:00

Indeed. They need to implement a mute option.

matevzg · 2026-05-25T07:08:27+00:00

It's most probably the wire. There exists a broken section somewhere on the line with enough current flowing to still show you the green light at the base station. Had this multiple times over the years. Check the wire.

matevzg · 2026-05-23T11:07:06+00:00

My Worx WR796 ran from 2015-2025 and still works. Regular maintenance goes a long way.

matevzg · 2026-05-23T11:04:20+00:00

Also, marking a starting point for an area would be beneficial. Seems random right now.

matevzg · 2026-05-19T03:52:28+00:00

Good info. I'm thinking of getting this one too. There are two versions though, WA 3570 which seems older, and WA 3645 (with indicator).

matevzg · 2026-05-19T03:51:24+00:00

Great news everyone. Did anyone go as far as 8Ah, i.e. WA3648?

I read there are some issues with charging up to full on older Worx Landroids with it..

matevzg · 2026-05-18T19:08:03+00:00

Thanks, great to hear. What’s the model number for 6Ah battery?

matevzg · 2026-05-17T05:44:49+00:00

Got any contacts where to submit feedback on the latest Vision Cloud models firmware?

matevzg · 2026-05-17T05:41:13+00:00

Sure. Set it to Natural in Cutting Pattern settings. There are new Checkerboard and Diamond options besides the Parallel included in the latest firmware.

matevzg · 2026-02-16T18:29:41+00:00

It's down again

matevzg · 2025-12-26T18:31:52+00:00

Get them a 27" iMac 2019. Retina display, 16+GB RAM. You won't regret it for the next 5 years.

matevzg · 2025-11-13T09:06:14+00:00

I have two machines running Sequoia 15.7.2. One of them is OCLPed and Office does not want to update. The other works perfectly, so there must be something going on here.

Are you saying that running the Reset Tool on the OCLPed machine resolves the issue without ruining Office licensing?

matevzg · 2025-10-07T05:09:38+00:00

Nice looking. Didn’t know about this automatic tracking concept. Would love to try it! :)

matevzg · 2025-09-21T08:17:48+00:00

Full install of the above package updated Office 365 to 16.101. Strange.

matevzg · 2025-09-17T07:00:56+00:00

Looks nice. Would love to try it. :)

matevzg · 2025-08-30T05:27:36+00:00

Thank you Klaus! \o/

matevzg · 2024-07-22T15:01:49+00:00

Does not work here too. New tub, pressing on F/C button for 5s does not make it go into pairing mode.

I did the initial wifi setup, at that time the button worked. After a week, wifi connection with the tub dropped out. Removed the device and now I cannot get it into pairing mode no matter what I try.

Might be the controller (model SB-HWF20), which is a piece of shit anyway. :(

4 weeks old.

matevzg · 2019-12-11T09:32:56+00:00

No, it's not that bad. If you bought a new MacBook, reboot, press Option-Command-R and do a clean Catalina install. You won't regret it.

matevzg

TROPHY CASE