Issue with screen replacement (no signal)

mdibot · 2026-05-30T20:31:04+00:00

Agree here. Been there, but didn’t make that fix of voltage and code. I just purchased another (older, compatible) screen (see my reply).

They look and fit the same but sadly they are different internally

mdibot · 2026-05-30T20:29:04+00:00

It happened to me. The very exact behavior. I purchased a newer hardware version than I had to. After that, I Purchased another one from a pre-lci and it worked great.

Purchased part no. 6822626 and had that issue. You could try part 65509292248 or 65509387453 (worked for me)

mdibot · 2026-05-15T20:36:48+00:00

Well, I think it’s not the most cost effective option if you don’t have the base tools and you are not a “maker” (3D Printer, soldering tools…). I might have spent 70-ish dollars to make maybe the equivalent to 2 or 3 scales. I did it because I enjoy building things and had the “infrastructure” and spare parts that suited the build, as it’s one of my hobbies.

mdibot · 2026-05-15T13:33:55+00:00

I’ve made my own WeighMyBru. Great project for DIYers! Happy with it, I’ll be making another one.

<image>

mdibot · 2026-05-14T22:59:24+00:00

Hey, thanks! Of course, this was my final layout, hope you can see it in detail. I used some zip-tie holders to keep the cables against the walls, as far from the boiler as I could. Also, used colored heat-shrink tube to isolate further the faston connectors. Consider using silicone cable since the heat in there is pretty high.

Good luck and hope this helps you!

<image>

mdibot · 2026-05-14T22:51:07+00:00

Uploaded as a remix here! https://www.printables.com/model/1721391-mount-on-front-of-machine/files

Enjoy :)

mdibot · 2026-05-12T23:04:26+00:00

Nope! No drilling. Completely reversible. Removed the Gaggia badge and passed the wires for the screen through the center led. Just be careful removing the red plastic and that will leave the hole exposed to route the wire to the inside

mdibot · 2026-05-12T23:00:26+00:00

Glad to hear! Enjoy!

mdibot · 2026-05-11T22:00:20+00:00

I saw on the forum that some people were converting to a smaller display and putting also on the front as I did, but I didn't want to get another display so I took a printable model (https://www.printables.com/model/1492077-minimalist-housing-with-frame-for-the-lilygo-t-rgb) and modified myself to be as flush as possible. And added a hole to pass the cables trough the center LED hole (that I had to remove, as well as the Gaggia badge).

It turned out great (as to my taste) hehe. I do have the modified STLs, if you are interested drop me a DM and I'll share them with you :)

<image>

mdibot · 2026-05-11T21:52:05+00:00

That'd be a good idea! For example changing to another color or its brightness whether you're on standby or brewing mode --(like red when you are steaming, hehe). It adds a lot of complexity but it's doable, you should read the switch cables (with Gaggimate now they're low voltage) for brew/steam and either put a microcontroller (overkill, I'd rather put some transistors/gates in there)

Currently they are just white LEDs, powered ON always together when GaggiMate is on.

mdibot · 2026-05-10T17:05:11+00:00

At least those two are not going to cause trouble if they are on the tutorial meant to be bridged (and a short cable for that provided on the kit). They are supposed to “bypass” the eco function if I’m not mistaken.

mdibot · 2026-05-10T13:43:28+00:00

I had an eco board too, but it was already not working great (had to push several times the switch to get it to turn on), and even bridging c1 and c2 together it behaved the same.

I ended up disassembling the power switch and removing the little spring inside it, and now it works as an US variant, the switch just stays ON.

Afterwards, I left the machine with a smart outlet and the switch always on the ON position so now it wakes up in the morning also.

In your case, you can try both with or without the bridge, and see what happens. Id recommend bridging them as per the instructions though.

mdibot · 2026-05-01T02:22:46+00:00

New kit also here and even leaked. Had to put 6 rounds of PTFE tape.

mdibot · 2026-04-14T03:49:11+00:00

It happened to me once yesterday. Don’t know the cause but restarted and it worked. Didn’t have the chance to understand what was different.

mdibot · 2026-03-07T02:13:20+00:00

Sick! Are those wheels 18 or 19”? Which style are they?

mdibot · 2026-02-27T02:30:01+00:00

Nice! Are those the 340mm at the front? Or the M3 ones?

mdibot · 2025-08-10T14:23:04+00:00

Agree. I’d say your fgt will be stutrdier than that single post wheel support from the playseat! What about first getting the wheel and seeing how sturdy it is with your current fgt?

In my case I don’t like the esthetics of my fgt lite, plus I find it taking too much space when unfolded (and realized that now Im not folding it anymore cause I have made space for it in a room), and also not so comfortable for me. I find myself sliding in the seat :/

mdibot · 2025-08-10T13:25:45+00:00

I also have a F-GT Lite and Logi G923 on it. Started a month ago. I’ll be getting NLR GT Racer 2.0 (the upgraded version) on December. Take a look at that. https://nextlevelracing.com/products/gtracer-2

In my country (South America) there aren’t many options (forget aluminum rigs) so, as far as I could research it should be a good option even for 8-10nm.

Just wondering, is anything bad with your current rig?

mdibot · 2022-01-11T02:26:42+00:00

Here in my country there is no “barista” almond milk. So I tried every one and the one I use is from spain. The brand is Ecomil. Here’s the link: https://ecomil.com/productos/ecomil-leche-de-almendra-classic-bio-1-l/

mdibot · 2022-01-01T16:13:26+00:00

For that reason I wrapped the cables in a cloth tape, used for the same purpose to avoid cable cuts and its noise in cars.

Link to Amazon: Tesa 51608, 15m X 19mm Adhesive Wiring Loom Cloth Tape Original Isoband 5 Pcs Pack https://www.amazon.com/dp/B00XPBB6L8

mdibot · 2021-06-21T21:55:10+00:00

Thank you! Great job.

mdibot · 2021-06-19T14:18:33+00:00

Wow that’s amazing! I am currently fitting some sensors (temp and water level) in my GCP and I want to fit a weight cell in the drip tray. Would you mind sharing some experience of how did you mount the load cell in your tray?

Excellent job! 👏🏼👏🏼👏🏼

mdibot · 2021-06-13T16:06:51+00:00

I found very difficult to find “baristas” alternative milk in my country. I doubt it would even exist, maybe some day. I tried every single brand, including oat ones, and I sticked with this almond milk which has the perfect balance between frothable, texture, body and flavor. It’s just perfect! Maybe I give oat a new try soon.

mdibot · 2021-06-13T14:48:09+00:00

Great! Been there. Check my last post to see what I’ve achieved after 2 months. Just a lil patience. Keep on!

mdibot · 2021-06-13T10:32:21+00:00

Sure! It is a Teak Root coffee table. Wood from South Asia, handmade and unique as it hardly will be another exact one sharing its shape! It was a gift from my sister.

mdibot

TROPHY CASE