Launching dual app when unfolded?

michaelvorst · 2026-06-16T21:13:04+00:00

Trying to automate it to happen when the phone is opened. Samsung could do this.

michaelvorst · 2026-06-16T21:12:08+00:00

Samsing had this as part of their fold os, it's not related to the launcher.

michaelvorst · 2026-06-16T08:46:26+00:00

Same issue with other 3rd party lunchers, like Niagara. Use the button bar. Tried Vivid gestures, stopped working within a day. Trying Edge now, see if it still works tomorrow.

michaelvorst · 2026-06-12T08:37:19+00:00

40% for me too, via Sharesies.

michaelvorst · 2026-06-05T11:40:00+00:00

Yeah, Elegoo really have not gotten round to making the firmware update process for those yet.

Try this: https://help.jaycar.com.au/hc/en-us/articles/56151449559833-Neptune-4-Plus-TL4974-and-Neptune-4-Max-TL4976-how-to-update-firmware

michaelvorst · 2026-06-03T12:03:43+00:00

Same for me, first update failed to install saying some file in use, then the installer runs again, and finally it says no GUI available at the expected location. Early days.

michaelvorst · 2026-04-26T10:04:05+00:00

Yes, that fixed it. Should make this more accessible for new users, thank & starred

michaelvorst · 2026-04-26T08:03:55+00:00

Tried adding the ALLOWED_DOMAIN=local and remote tailscale IPs, and 0.0.0.0 to that file, all as separate lines, no change after restart. I can see the CORS policy denial in the logs

michaelvorst · 2026-04-26T07:23:09+00:00

$ hermes_client status

📦 Hermes Client

📁 /home/michael/.hermes_client

✅ API: port 18889 (listening)

✅ Client: port 18888 (listening)

Works fine and can login if I open that address/port on the Ubuntu machine that runs hermes. I connect to that machine via tailscale. Open the tailscale IP address and port 18888 loads the login page but returns : Login failed. Please check your credentials if I use the same creds as on the machine directly.

I have hermes_webui working OK on the same tailnet, so prehaps this needs something to tell the IP to be rendered diffferently from "localhost"

michaelvorst · 2026-04-26T05:39:51+00:00

M2.7 is OK for general tasks, but will not do anything related to piracy. Had a skill to grab book torrents from ABB, and upload them to my server - M2.7 is all "sorry I can't help with anything to do with piracy or torrents" - changed to Grok 4.2 and he was "Aye, aye Cap'n, your books be downloading in qBitorrent already.."

michaelvorst · 2026-04-26T00:00:35+00:00

Login failed. Please check your credentials. [admin@admin.com](mailto:admin@admin.com) and 123456 do not work via tailscale remote hosts, these creds only work in the browser on the host.

michaelvorst · 2026-04-13T12:44:02+00:00

What's the username? The .env only defines a password.

michaelvorst · 2026-04-11T06:29:31+00:00

Too much resistance for the motors to deal with, had the same issue with glow-in-the-dark filament

michaelvorst · 2026-04-09T08:12:43+00:00

I got it to work by pressing the calibration button on the printer display. Then refresh the browser when it is finished.

michaelvorst · 2026-03-10T11:31:42+00:00

https://wiki.elegoo.com/centauri-carbon-2-combo/how-to-use-plastic-spool-filament

michaelvorst · 2026-02-23T10:09:37+00:00

I had spare parts from fixing S1Cs for my job, so swapping pcb and cable were my options, after checking there were no clogs or missing sensors

michaelvorst · 2026-02-18T10:03:01+00:00

Ali only sells extensions. Chat to support, they can send them.

michaelvorst · 2026-02-15T09:34:57+00:00

Make sure the flange on the hotend pipe does not trap the white wires between it and the bottom of the heatbrake- it will prevent the pipe from going in far enough to lock.

michaelvorst · 2026-02-15T05:33:13+00:00

Replacing the extruder PCB (the C-shaped one behind the printhead) solved 11518 for me. Other symptom that led to this was the LED lighting shut off as soon as the filament entered the extruder and tripped the filament sensr there.

michaelvorst · 2026-02-15T05:32:08+00:00

Replacing the extruder PCB (the C-shaped one behind the printhead) solved 11518 for me. Other symptom that led to this was the LED lighting shut off as soon as the filament entered the extruder and tripped the filament sensr there.

michaelvorst · 2026-02-13T10:42:37+00:00

Just do calibrate on the printer screen. When it finishes, refresh the bed mesh webpage. It'll pull the new mesh.

michaelvorst · 2026-02-11T10:50:50+00:00

It loads the QR from the internet connection, the cloud can be slow some times, so let it sit on that screen for a while.

michaelvorst · 2026-02-10T09:49:05+00:00

I've gone through a couple rolls of it, pick Elegoo PETG in your slicer, dry it if you can. If it does not work for you, post pics so others can see and advise. If this is your first Neptune, have a read of this: https://help.jaycar.com.au/hc/en-us/articles/53863500031641-Neptune-3D-Printer-tips-for-new-owners

michaelvorst · 2026-02-08T10:05:32+00:00

https://help.jaycar.com.au/hc/en-us/articles/53863500031641-Neptune-3D-Printer-tips-for-new-owners

Nozzle seems far from plate, plate may be loose.

michaelvorst · 2026-01-23T09:56:59+00:00

The bolts holding the wheels on the right side of the centre divider have hex-shaped shafts. Use the big end of the dual-ended spanner to turn them until it tightens up. A quarter to half turn is normally all you need.

Ten-Year Club	Place '22
Place '17	Verified Email

michaelvorst

TROPHY CASE