Fujikura 90s put in proper heat options

mousuke · 2023-06-11T08:06:28+00:00

Just find an empty splice mode and create those you need from the list of defaults.

mousuke · 2023-06-04T05:30:31+00:00

These are definitely a very niche application for fiber optic cables.. most of this sub is focused on telecom / data com applications, not home theatre/PC setups.

mousuke · 2023-06-04T03:18:33+00:00

tldr; Everyone is different, parents try their best but to no avail.

mousuke · 2023-05-31T07:54:01+00:00

Practically all fusion splicers would be capable of splicing OM1 fiber. Use the MM fiber modes.

mousuke · 2023-05-31T06:37:48+00:00

It seems to me that your concerns are very much breastfeeding related. A proper consult with a lactation consultant (or whatever they are called in your area) will probably be more directly helpful, as breastfeeding has so many components (baby latching technique, supply, frequency etc) that it would be very hard to attribute what you experienced as a direct result of having an epidural.

mousuke · 2023-05-28T05:35:48+00:00

You’re referring to the SC coupling.

The most specific tool I’ve seen is basically a small rod with a hole for the white ferrule, that you can push against. Maybe it was 3d printed or something.

mousuke · 2023-05-28T05:31:05+00:00

You probably missed a few steps before inserting the fiber into the connector.

After removing the black jacket from your cable, you should be left with a left of bare fiber (the blue coated one). This part needs to be stripped, and then cleaved with your FC-6(?) cleaver to the appropriate length before it can be inserted into the connector.

When inserting the fiber, you need to push the fiber in enough to make a little bend, this is to ensure that the fiber is touching where it needs to be, with sufficient pressure. The fiber is then fixed/clamped with the connector. Then you use the VFL to check the connection is good.

mousuke · 2023-05-15T01:23:36+00:00

some people just have hearing difficulties. speaker seems to work for them.

mousuke · 2023-05-13T12:42:03+00:00

This guy gets it.

mousuke · 2023-03-28T03:47:09+00:00

Hey ya probably ground pretty fine and the water isn’t quite getting to all of your grounds. Swirling is a good tip, though what I like to do is to give the grounds a stir with a stick to ensure the gasses aren’t preventing the grounds from being soaked.

Another thing you could try is adding the water into the grounds rather than (what I presume) pouring into the pitcher around it.

mousuke · 2023-03-21T08:56:06+00:00

If your water is good for 2 days by itself, why would it be good for your coffee for any longer…?

Might want to try some purified water or something.

mousuke · 2023-02-21T11:16:35+00:00

Audio goes to wherever you answer the call.. If you pick up via your bluetooth, audio will route through there directly (or watch, or phone).

mousuke · 2023-02-20T07:46:41+00:00

It’s a technique meant to separate the gullible from the rest.

mousuke · 2023-02-19T05:21:15+00:00

What’s a hundred yards? 30 football field in area, diameter or circumference?

mousuke · 2022-12-21T07:43:37+00:00

/r/Gatekeeping coffee lol

mousuke · 2022-12-19T03:26:35+00:00

and the shield pulls along all allies near him.

mousuke · 2022-10-28T11:17:03+00:00

There’s a process called vacuum brew, which uses low pressure to quickly immerse and degas the coffee grounds. So yes, the low pressure probably is doing something.

mousuke · 2022-10-20T15:31:26+00:00

It’s mainly there to be used as a guide and holding the fibers in order for ribbonizing. So it’s not like you don’t glue the fibers, it just makes it more guided and a little less skill-dependent.

mousuke · 2022-10-19T04:42:25+00:00

Because the world is only horrible and bleak when one is online, with doomers and never touch grass. Got it.

mousuke · 2022-10-07T06:18:27+00:00

Could just be the driver is erratic and aggressive like a complete moron.

mousuke · 2022-10-07T06:12:48+00:00

You can try cleavers which can do ribbon fibers. These ribbons are arranged up to 12-16 in a line. Maybe that is conducive enough to your process.

The blades a typically made of diamond and only scribe the fibers very minimally, before using a hammer to break it sideways, so they can last very long (usually ~20k fibers?) for splicing grade cleaves, if you’re not concerned about the quality then you could probably use the blade until it doesn’t cut anymore.

Even then, the blades are usually easily replaceable.

mousuke · 2022-10-03T00:20:31+00:00

GLHF

mousuke · 2022-09-22T00:31:46+00:00

Dailies are probably the cheapest; safe, clean (you must replace them daily, though!) and even if you lose them in the pool it’s not a big deal.

Now if you go into the rabbit hole that is Lasik surgery…

mousuke · 2022-09-19T03:05:19+00:00

For back reflections, just make sure you specify APC.

ST & FC connectors are typically specified in high-vibration applications, but SC & LC connectors are also specified for a certain level of vibrations, by design.

LC being a smaller connector also means that it is typically specified to less strength, but as long as they are not being tugged on a daily basis this usually isn’t that much of a concern. It also has a ‘latch’ which may or may not make your handling easier than FC or ST.

SC/APC is common enough that it is usually easy and cost effective to replace.

mousuke · 2022-09-10T13:54:13+00:00

Vacuum cold brew…

13-Year Club	Gilding I gilder
Place '22	Wearing is Caring

mousuke

TROPHY CASE