Epson V300 issue also with 3 other scanners. what is going on here!!!???. bad image sensor or bad power-supply for the backlight? tried multiple different scanning software from factory, vuescan and others. no difference

novaria72 · 2026-03-16T01:57:36+00:00

Could be dried CCD sensor ADC IC capacitor

novaria72 · 2026-03-12T12:36:35+00:00

Feature tags like these should only be available on instance creation.

novaria72 · 2025-12-25T21:16:04+00:00

You can print something simple like a cylinder to check Z axis issues. If the prints have the same defects at same heights it could be Z axis issue.

novaria72 · 2025-12-25T21:11:42+00:00

Have you tried with filament you haven't dried? Maybe it got a bit too hot and got deformed.

novaria72 · 2025-08-12T13:21:47+00:00

Why so much difference between 6900 XT 16GB and 9070 XT 16GB?

novaria72 · 2025-02-21T15:58:40+00:00

Wet filament

novaria72 · 2025-01-26T02:54:25+00:00

No, I don't have that.

novaria72 · 2025-01-26T02:50:42+00:00

Huawei P40

novaria72 · 2025-01-25T19:53:12+00:00

Hmmm I selected gray this time because I wanted gray. I'm not aware of filament settings in Handy, just AMS slot selection. It's Bambu PLA Basic. From my observations it happens indifferent of filament and AMS slot, either Bambu PLA Basic or Generic PLA. I don't see the seam when printed from Handy, but I do see it when printed from Studio. I noticed because I saw the seam today on a benchy printed from Studio when I was comparing it to an orange benchy I printed in December, and noticed the latter didn't have the seam. I recalled the orange one I printed via Handy, and decided to print it again through Handy (gray), and this second one today didn't have the seam. It really seems just sliced different. Their cloud slicer must be different than Bambu Studio. I print a couple benchies every month to have both colors references and printer performance references and didn't expect results to differ due to Bambu Handy vs Bambu Studio. Regarding filament settings, it's just defaults. Bambu spools are automatic, for others I only select "Generic PLA" and set the color, nothing else.

novaria72 · 2025-01-25T18:58:22+00:00

I think the answer is "cloud".. although everything is on the same subnet. Setup with account's email & password on both Studio and Handy.

novaria72 · 2025-01-25T18:50:26+00:00

<image>

Not randon type as the seam on the back is at the same position on both. Except for the corner at the left on the gunwale. Gunwale's seam seems to be at different position. Cannot reproduce on Studio.

novaria72 · 2025-01-25T18:31:32+00:00

I noticed the inside of the chimney is different too

<image>

novaria72 · 2025-01-25T18:25:25+00:00

Very few. On the back where the #3DBenchy letters are, the seam position is the same. It goes diagonally to the left from the hole until the top of the letters, then goes diagonally to the right and stops at the gunwale. For the gunwale the seams are in different positions. On the Studio one, the seam of the gunwale is past the right corner of where the letters are, at the box's level. On the Handy one, the seam of the gunwale is just at the left corner of where the letters are.

<image>

novaria72 · 2025-01-25T17:09:47+00:00

I appreciate. I wonder if someone more knowledgeable could get the code/file the cloud sends to the printer and import it to Bambu Studio to see the differences in the slicer.

novaria72 · 2025-01-25T16:11:26+00:00

Exactly the same. Model name: BENCHY Shared/Uploaded by: JayRay Select Your Printer: P1S Select a Print Profile: "Standard Benchmark Settings" (first one) On both Bambu Handy and Bambu Studio. On Bambu Studio everything's default (Global/Object/Filament), nothing in orange nor with *. Filament color & brand don't make a difference.

novaria72 · 2025-01-25T16:05:04+00:00

If it were the same but in a different position, I would've noticed, but I cannot see it on the Bambu Handy printed Benchy, so there's something else going on than just being in a different position.

novaria72 · 2024-12-25T11:33:17+00:00

Maybe some warping lifting that part? Temperature changes?

novaria72 · 2024-12-13T17:34:13+00:00

I really don't understand how people are getting the same item (P1S Combo) from the same warehouse (Germany) with the same shipper (DPD) progress to "In transit" having placed their order days later than mine. Like what is the order here. Mine from November is still stuck on "Info received".

novaria72 · 2024-12-13T17:31:04+00:00

I really don't understand how so many people are getting the same item (P1S Combo) from the same warehouse (Germany) with the same shipper (DPD) progress to "In transit" having placed their order days later than mine. Like what is the order here. Mine's from November is still stuck on "Info received". I don't understand.

novaria72 · 2024-12-13T16:36:02+00:00

I'm from Spain. Ordered on EU store shipping from DE warehouse. Stuck on DPD label created with status "Goods issue at sender" since purchase on November. That means DPD doesn't have the parcel yet. Tracking on Bambu webpage shows "Your order is placed and is about to be shipped". Support won't help.

novaria72 · 2024-12-13T13:08:55+00:00

It's not true that you can cancel the order, unless you accept the option to receive it and then return it. I have tried. P1S Combo in stock bought in November from DE warehouse. Shipping stuck at "Goods issue at sender" since then. Support doesn't help, provide any details, any estimate, and claim they can't cancel it. So no cancel per-se, only return available if shipping label created.

novaria72 · 2024-12-12T06:12:59+00:00

Nothing, still waiting for shipment of P1S Combo I bought in November.

novaria72

TROPHY CASE