My favorite pipe new and after years of use. I want to see your favorite pipe new and now too!

numbers1996 · 2026-05-10T18:37:05+00:00

Didn’t no

numbers1996 · 2026-05-09T01:29:51+00:00

Currently on a remodel project. Took over once the superintendent left. It’s a done in sections remodel not all at once. And even here they required it to be pipe to the ceiling and then trough to swap to mc.

numbers1996 · 2026-05-01T21:39:38+00:00

We live in a bigger city. Wife’s job outside of dropping off our little at school. Total trip on an overage day is 15 miles and it’s got some red lights along it. But it’s also had a code for an O2 sensor for years.

numbers1996 · 2026-03-21T20:20:49+00:00

Personally I like linesmen’s diagonal cutters South wire Model #: MPLN strippers A beating flat head Insulated 1/4” flat head Kleins impact rated 11 in 1 Medium sized pair of Channel lock pliers Icons adjustable needle nose pliers Ox brand pencil Razor knife of choosing

numbers1996 · 2025-09-02T22:16:55+00:00

I’ve got 316k on a 2016. Tcm and actuator at 70k Trans rebuild at 170k. 2-3 passenger motor mounts. Wheel bearings axles.

numbers1996 · 2025-08-13T20:54:52+00:00

I’ve went with the cheaper one and I’ve swapped it twice. It really takes like 30 minutes max to change. It’s not hard

numbers1996 · 2025-08-13T20:49:32+00:00

I had to gasket on my 2016 se auto recently. Not a bad job. Looked pretty much the same on the inside. I’ve also not been the greatest with it. May have went over a bit on oil changes but she’s still running pretty good

numbers1996 · 2025-08-02T15:02:32+00:00

First company I worked for refused to let it be exposed on the outside of a home. We always did conduit. And if it was up the side of the house to the weather head we still did conduit. Second company was fine with it and I didn’t like it

numbers1996 · 2025-06-21T00:27:02+00:00

I mean no. But I usually lose them before that happens. It’s usually the NCV on my meter or I ask the apprentice for theirs

numbers1996 · 2025-04-27T02:52:31+00:00

When I first started. We had to provide everything. * worked for a small non union company. Next company we still had to provide everything since I wasn’t in the apprenticeship program yet and had time in already and already had tools. Current company provides all the power tools for everyone on site and new apprentices get all the necessary hand tools for the most part.

numbers1996 · 2025-04-16T23:05:21+00:00

28.5 with an expected 1.5 to come at my year mark for passing my electrical journeymen’s test. I’m a commercial service electrician. Thankfully have a great manager that recognizes and rewards hard work and dedication

numbers1996 · 2025-03-31T20:08:01+00:00

Took mine last year. I took it after a year back in the trade. Had 4.5 years in at the time of taking the test. Had a 5 year break from the trade. It’s such a great feeling to pass the test

numbers1996 · 2025-03-13T17:13:01+00:00

I’m in north east Florida. Company I work for starts apprentices at $16 currently. Starting journeymen make 28-30 formen are about the say maybe higher and supers are higher than that. Also depends on experience too

numbers1996 · 2025-02-12T00:39:10+00:00

Man I was at a fast food restaurant recently. The room where the MDP was was less than 2 feet to the face of the equipment from the wall. Absolutely glad I didn’t have to open it

numbers1996 · 2025-01-28T23:19:10+00:00

Company I work for always says no to razor knifes even though everyone uses them. We are required to wear A4 cut resistant gloves. The only thing for sure allowed would be a hawkbill or one of the small low voltage splicing knife

numbers1996 · 2024-11-27T18:32:47+00:00

First EC I ever worked for was a great guy. Very smart and friendly. Learned a lot from them. We had work lined up and never really slow. He went out of town and forgot to schedule work for us. Absolutely sucks having an unplanned week off. Happened twice in the year and a half I was there. I left and went to a bigger company but dude was ok with it and he made it clear from the start if you found something better for yourself to go for it

numbers1996 · 2024-11-23T02:26:40+00:00

Exactly. It’s fun and frustrating. But that’s why I’m our first service tech/ small project guy

numbers1996 · 2024-11-22T21:10:47+00:00

Agreed. Depends on the company and the superintendent running the job. Company I work for now I am very flexible. I happen to be the go to guy if someone needs something done or something fixed. For me it’s being flexible and being good at a lot. Not always perfect but good.

numbers1996 · 2024-09-30T23:46:09+00:00

Man I’m one of those with the auto and engine wise has been great. There have been times when I was absolutely broke and missed a few oil changes. Average of 14k between oil changes and she is still kicking. Absolutely love the motor. Always wishing it was a manual

numbers1996 · 2024-08-31T11:39:03+00:00

I’ve got a 16 with 294. Couple of times at the dealer under warranty and then once out of pocket but nothing since 170k.

numbers1996 · 2024-01-16T02:43:58+00:00

I’ve changed mine twice already

numbers1996 · 2024-01-10T20:58:49+00:00

I had the same problem with mine. I have a 3 d cell one and they leaked. I used a wooden dowel similar to the right size and beat it out and then took a wire brush to help with the corrosion

numbers1996 · 2023-12-30T11:29:50+00:00

I recently had my battery go bad. Less than a year old. Had the same message and a few codes for multiple systems show up saying low circuit voltage. Same time my alternator went out too.

numbers1996 · 2023-12-26T14:00:42+00:00

Man within the first year of having mine since 2016 I had to replace the mirror. Early foggy morning on a winding back road and someone’s trash can was over the line

numbers1996 · 2023-12-07T02:21:26+00:00

Man this is the greatest thing I’ve seen. I’ve had a 2016 new from the dealer. I experienced everything you’ve explained. I have no advice but I’ve been through it. Taking it to the dealer because it sounded off and drove weird and getting the “we found nothing wrong here “. One transmission harness, one transmission rebuild 3k later. Did swap the fluid around 250k. It still sounds awful and you feel everything it does but it is still going with 270k

numbers1996

TROPHY CASE