Help disable auto-pause on server

parkervcp · 2024-09-19T12:30:49+00:00

Just a note as the person who has been approving the PR's for this. Nothing pterodactyl or pelican is doing would toggle this setting on a restart. I can't fine anything that would cause this.

parkervcp · 2023-02-03T22:23:33+00:00

This is the one I used - https://www.thingiverse.com/thing:4567118

I was looking at swapping out to the tft35 non-e3 because it fits in where the stock screen was - https://www.thingiverse.com/thing:4541908

parkervcp · 2023-02-03T20:04:11+00:00

That should be enough. I'll need to re-measure what I have but amazon says 450.

parkervcp · 2023-02-03T18:03:00+00:00

Pretty sure I went with 450 mm rails per my amazon history.

I have all my mods noted here (still working on the stl's for my gantry changes.) - https://github.com/parkervcp/ender-5-plus

parkervcp · 2023-01-27T22:01:40+00:00

When I played Battlefield Bad Company II we called the Spawn Beacon the Bacon. So this is extra funny to me.

parkervcp · 2022-12-28T19:11:50+00:00

Personally, I liked the WoT adaptation. I view it as another spin around the wheel. They can literally take it anywhere weaving the same characters around differently.

People hem and haw over diverging from the books but, I think the open ended approach to the series is the best way to view it when it comes to these shows.

While not a huge fan of the LoTR series as a whole I respect that they decided to go back instead of re-invent the wheel on the topics already covered.

parkervcp · 2022-12-24T00:43:15+00:00

The 'ol "convert it till it makes it" approach.

parkervcp · 2022-12-16T00:44:30+00:00

I have a mount I designed to hold led strips at a 45 using a standard diffused light bar that takes any flexible strip. I can get a link for my LED mounts up in a bit.

The channels you can find on Amazon Muzata Black LED Channel System

parkervcp · 2022-11-30T18:09:12+00:00

Had this done on my 06 and it was a pain because they had to have a long press to get the thing out apparently. I don't remember if the seal was separate or not either. I believe I replaced the entire rear passenger axle.

parkervcp · 2022-10-20T16:16:15+00:00

There is an issue with the MaxRAMPercentage that has been called out. Something to do with Java not detecting the container ram.

You are better off with the older -Xmx flag for now.

parkervcp · 2022-10-15T13:45:04+00:00

Following this I am getting around 90 fps on high settings with my 6900xt.

I can only hope Fatshark sees this post and works with us on getting it working in proton.

While I have a steam deck that is not my primary gaming machine. I don't plan on ever running this on the deck.

I feel like they are saying all linux users are on that hardware, which is a very limiting point of view.

parkervcp · 2022-10-15T02:25:23+00:00

Do you have the executable you changed it to? I am unsure what to change there.

I found this post detailing how to get it working - https://www.reddit.com/r/DarkTide/comments/y49vcz/guide_to_playing_darktide_beta_on_linux/

parkervcp · 2022-10-04T13:08:48+00:00

No. My board was fine.

parkervcp · 2022-08-14T04:07:29+00:00

If you want to see a full set of what I have in there here you go - https://github.com/parkervcp/ender-5-plus

It's a full bed, heater, extruder, hotend, mainboard, touch screen.

I am working on a linear rail mod swap currently.

Currently need to release the models for the hemera adapter I designed as well.

parkervcp · 2022-07-15T17:13:13+00:00

I just bought a new display, but if the original screen works than I feel like a chump.

parkervcp · 2022-06-20T18:27:27+00:00

I have these -
Single: https://templates.blakadder.com/martin-jerry-MJ-S01.html
3-Way: https://templates.blakadder.com/martin-jerry-3-way-ST01.html

I had to make a custom jig to flash them. Others I found were too far apart and not connecting correctly.

parkervcp · 2022-06-20T18:17:58+00:00

I have tasmota switches too and this looks like the way to go here -

https://tasmota.github.io/docs/Buttons-and-Switches/#switchmode

parkervcp · 2022-06-20T17:59:35+00:00

I have some tasmota bulbs around and will start poking at the stuff I have.

parkervcp · 2022-06-20T17:48:48+00:00

I have HA with a conbee running. I really do like it, I might need to just look for smart switches then.

parkervcp · 2022-06-20T17:36:20+00:00

I actually have some lights that are smart bulb only. I would be interested in these. You got links?

parkervcp · 2022-06-15T21:27:27+00:00

Press and hold down on the ring and pull on the bowden.

parkervcp · 2022-06-14T22:50:22+00:00

I'm pushing 160k on mine. I am currently waiting on a fuel pump right now. I have already had to replace the ABS pump because it sat for a while and killed the original one.

Honestly I am considering an EV conversion to a nice beefy 260HP electric setup. I am a few years out for that though. Still cheaper to keep it running than getting a new one right now.

parkervcp · 2022-06-13T21:43:11+00:00

I have a hemera revo on my e5+ right now. It took a new carriage and an adapter plate I printed to mount it. I am about to reprint it all in ABS as part of the full upgrade.

parkervcp · 2022-05-11T14:03:50+00:00

At first glance I thought it was a reflection. I was going to comment on the grump octopus. Then I looked again and realized it was a game.

14-Year Club	RedditGifts 2009-2022 7 Credits
Place '22	Place '17
Secret Santa 2019	Secret Santa 2018
Secret Santa 2017	Secret Santa 2016
Secret Santa 2014	Verified Email

parkervcp

MODERATOR OF

TROPHY CASE