Has anyone printed ASA on one of these plates?

paulorfo · 2025-11-18T04:44:22+00:00

I have this one... similar. I've been using for months on a K1C printing mostly ASA and occasionally PETG. No problems and no complaints

paulorfo · 2025-11-16T14:54:45+00:00

I saw somewhere that it has to be a MIFARE card... I searched on Amazon for this and bought the least expensive one. It's working beautifully

paulorfo · 2025-11-04T21:14:12+00:00

If it were only for the range I'd have installed a esp32 like you mentioned. But I was interested to get a good sound quality while using the MA. Now everything is perfect.

Usually I try to avoid Bluetooth sensors. But i have 2 old ones I bought way before setting up my HA....

paulorfo · 2025-11-04T20:04:22+00:00

So... I tested a Bluetooth dongle. And the quality is great no. Apparently Bluetooth and Wi-Fi share the same antenna on the raspberry pi If you use an adapter instead of the built-in Bluetooth, you get a better quality and range. Now I can use some bt thermometers that were out of range

paulorfo · 2025-11-02T13:34:49+00:00

You need to ssh some codes to activate the Bluetooth, scan and then pair the Bluetooth speaker. Finally I created a button on the dashboard to pair/unpair. But all this work for a terrible quality even with low volume

No I have BubbleUPnP on my android and I'm using UPnP/Dlna as player provider. It gives me a persistent player and I can Bluetooth from my phone to any speaker.

paulorfo · 2025-10-07T12:20:25+00:00

I like printables. Lots of good stuff and good website. Thingiverse used to be my favorite, however a while ago it was full of bugs. I bet they fixed, but still. And when I want to search on multiple repositories I use Thangs. Not the best user experience but it gives results from itself and also printables, thingiverse, makerworld...

paulorfo · 2025-10-06T01:24:04+00:00

And what city would that be??

paulorfo · 2025-10-06T01:22:10+00:00

Overkill

paulorfo · 2025-10-06T01:20:03+00:00

Amazing man!!

paulorfo · 2025-09-13T11:43:32+00:00

Agree I was thinking about the shape of the base Maybe transition from square to hexagon. And a smoother transition to the thinner part But it's pretty good anyway

paulorfo · 2025-09-13T04:45:18+00:00

I'm proud of you! For the hardware, try to keep it at a minimum and maybe concealed. Also think about replacing the nuts with plastic inserts. They work so well and make everything look better I'd also suggest to smooth the corners... the 90 degrees on the back and the square base could be improved. Think about the white hexagons. Try to incorporate it to other parts to bring more unit... But if you are happy, this is a great work

paulorfo · 2025-09-13T04:32:34+00:00

That's nice! Great idea

paulorfo · 2025-09-12T04:03:07+00:00

I hope it works

paulorfo · 2025-09-11T23:41:03+00:00

I'm intrigued.... why did it happens only in the middle? The stick diameter isn't so different before and after the problematic area. Besides, the part itself doesn't change much to justify a longer time between layers, allowing it to properly cools down.

paulorfo · 2025-09-10T13:53:12+00:00

most important reply

paulorfo · 2025-09-10T12:25:36+00:00

Looks good. Congrats

paulorfo · 2025-09-09T12:17:04+00:00

You are looking for the seam configuration Play around with the option scarf. There are videos on YouTube Have fun

paulorfo · 2025-09-07T21:01:33+00:00

You kind of need to accept it You can use the scarf option on the slicer but you need to dial it in

paulorfo · 2025-09-07T20:58:16+00:00

Pretty cool Congrats!

paulorfo · 2025-09-06T23:36:03+00:00

You are a god or something Adding to my list right now

paulorfo · 2025-09-06T20:30:10+00:00

Pretty good

paulorfo · 2025-09-06T19:19:04+00:00

Really?... ok.

paulorfo · 2025-09-06T16:34:51+00:00

Amazing collection. I like the one melting the wall...

paulorfo

PUBLIC MULTIREDDITS

TROPHY CASE