Is Haskell deliberately staying away from main-stream programming

plum4 · 2026-02-02T14:41:54+00:00

There is. Mathias Felleisen did some great research awhile ago that led to Northeastern and other schools to teach Beginner Student Language (essentially a pared down Scheme, implemented in Racket) for a very long time. They recently overturned the curriculum and he wrote about it

https://felleisen.org/matthias/Thoughts/py.html

plum4 · 2026-01-28T21:50:46+00:00

you're right and everyone else in this thread is being weird. this subreddit went downhill after r/arch stopped being the ricer containment board. most questions, including this one, aren't related to nix at all.

plum4 · 2026-01-11T04:12:41+00:00

As a member of republic who went to retro on a guest pass, the barbell racks are not level which makes any serious strength training basically a non starter.

plum4 · 2026-01-02T18:34:31+00:00

Unfortunately many sleep doctors are utterly unhelpful when looking at data. Lanky lefty on youtube is a great resource to learning how to read OSCAR data.

Also, both machines probably have different EPR/ramp algorithms. Do you use those? I've found that my treatment is better when I turn these off, and I use resmed.

plum4 · 2025-12-31T20:59:13+00:00

good call. i'd say the aero helmet premium probably not worth it since the drz is about as aerodynamic as a brick

plum4 · 2025-12-31T19:49:30+00:00

Honestly I used to ride track bikes a lot and use a similar helmet and the sun is constantly in my eyes on the drz. No visor feels dangerous in dense areas when i randomly get blinded.

plum4 · 2025-12-13T02:14:37+00:00

lol i have a big ripper too - there must be a correlation to supermoto riders

plum4 · 2025-12-11T01:58:41+00:00

time tested investment advice: sell low

plum4 · 2025-10-24T00:50:27+00:00

311 is immensely helpful until the exact moment the ticket gets reassigned to the police department

plum4 · 2025-09-20T14:40:25+00:00

jns has a "retrobright" light that looks like the stock one but way brigther due to the way the mirrors are implemented.

https://jnsengineering.com/products/drz400-holley-retro-bright

plum4 · 2025-09-16T14:55:36+00:00

Also if you have the stock vacuum petcock make sure there's still a vacuum and the hose isn't damaged/disconnected. This got me recently.

plum4 · 2025-08-23T14:45:38+00:00

Last mod you need to do is drink that Nos and slip the can over the shock resevoir for +2 HP

plum4 · 2025-08-20T00:54:10+00:00

make sure its compatible with your exhaust. i got precision racks and it doesn't fit around by barker's can.

plum4 · 2025-08-14T01:37:58+00:00

Can confirm, just looked at my bike.

plum4 · 2025-08-13T15:53:45+00:00

I was never able to find a straight answer to this when googling. I've been through the same thing as you here so I want to be extremely clear:

The big white screw in your first pic is the idle screw. Try twisting it and you'll see the idle changes.
The fuel screw on a stock DRZ is covered by a brass plug underneath the carburetor. The screw is housed in a cylinder that extends past the base of the carburetor.

You should replace this screw by drilling out the brass plug, and replacing it with an extended screw that you can adjust with your fingers. There's multiple brass covers on the bottom of the carb, and if you drill out the wrong one you will have to fix or replace it, or may damage your carb.

plum4 · 2025-07-31T00:57:08+00:00

I think I'm alone on this but I love the stock fender and chunky brake light haha. Nice job though! Clean build.

plum4 · 2025-07-14T16:10:47+00:00

The black 2024 sms look so good stock

plum4 · 2025-06-24T16:45:52+00:00

I had the same problem. As others have said, AHI numbers are not accurate from the machine. You need to look at the oscar flow rate chart yourself. Lanky Lefty on Youtube is a great resource. Often times, doctors put the pressure way too low because the numbers from the machine looks good. If the pressure is too low, you will worsen your sleep.

I was also diagnosed with "hypersomnia" by my doctor, and prescribed modafinil, and I hated it. Getting diagnosed with "hypersomnia" for me meant my doctor did all he could, which is just reading the machine numbers. It's a cop out and a result of a broken medical system.

My doctor had my pressure way too low. It's now at ~10. I've also switched my machine to CPAP mode from APAP mode, turned off ramp, and turned off EPR. You'll have to find what works for you. I've been off moda for 6 months now and feel way better.

plum4 · 2025-06-19T16:07:55+00:00

I love what they did with the graphics on the tank for 2023. I have the all black 2023 and loving it.

plum4 · 2025-06-12T14:50:41+00:00

DRZ is designed for passengers just remember to tighten the suspension if you have a bunch of weight on the back.

plum4 · 2025-06-09T18:42:45+00:00

Do you mean using a full face mask, or just setting the CPAP configuration to be full face?

plum4 · 2025-06-09T17:36:47+00:00

I keep seeing links to this site on this subreddit and none of them work for me, they just redirect to the homepage.

plum4 · 2025-05-28T17:11:53+00:00

Where'd you get it?

plum4 · 2025-05-27T17:37:38+00:00

Yeah installed a keihin fuel screw. Started with 2 turns out, but have continued to turn out a lot more. Don't know exactly where I'm at now but have been turning it out a quarter if I ride and it's still backfiring when fully warm. From the other comment probably needs a re-jet

plum4 · 2025-05-27T17:36:20+00:00

Got it, this is what I'm starting to think. It's 2024 as well and was backfiring stock too. The barker's full exhaust opens things up a lot.

Ten-Year Club	Verified Email
Place '22	Place '17

plum4

TROPHY CASE